Tài liệu KRONE STP (U/FTP*) 450/23 STP (U/FTP*) 450/23 FRNC Cat. 6 Cable pptx

KRONE STP (U/FTP*) 450/23 STP (U/FTP*) 450/23 FRNC Cat. 6 Cable Application The KRONE STP (U/FTP) 450 cable is designed for applications up to 450 MHz and provides transmission performance meeting Category 6 specifications. KRONE cables are low skew products, i.e. the difference in propagation delay between the individual pairs is very low. This is increasingly being requested for Gigabit Ethernet. The suitability of the cable for high-bit-rate transmission systems ensures a high degree of future proofing. Additional features are the slim design and low weight of the cables. Each pair is individually shielded with foil (STP) and around the stranded pairs (PIMF) we designed this kind with a extra foil. The cable thus exceeds the requirements for EN 55022 Class B emission and EN 55024 immunity, enabling networks to be built which are compliant with the standards on electromagnetic compatibility. The compact design allows the cables to be installed flat or folded together. * Cable description in accordance to ISO/IEC 11801 (2002) appendix E KRONE Far East Tel. + 65-6538 8628 Fax + 65-6538 8636 E -Mail: kfe.mktg@krone.com subject to availability & technical change without prior notice Website: www.kroneasia.com page 2 of 3 subject to availability & technical change without prior notice Tel. + 65-6538 8628 Fax + 65-6538 8636 E -Mail: kfe.mktg@krone.com KRONE Far East Website: www.kroneasia.com KRONE STP (U/FTP*) 450/23 STP (U/FTP*) 450/23 FRNC Cat. 6 Cable Characteristics Specified up to 450 MHz Excellent electrical characteristics Each pair is individually shielded with foil (PIMF) Additional foil around the stranded pairs Drain wire between foil shields Low delay skew between the pairs (low skew) Zero halgen version (LSZH / Low Smoke Zero Halogen) Flame retardant to IEC 60332-3 and DIN VDE 0472, part 804, test type C Design Type designation Category Copper conductor Number of pairs Fire rating (MJ/m) Halogen -free Tensile strength for installation [N] Outside-ø [mm] Weight [kg/km] STP 450/23 4P LSZH-3 6 AWG 23 4 0,57 yes 105 7,4 58 STP 450/23 8P LSZH-3 6 AWG 23 8 1,16 yes 210 7,4 x 15,5 100 Elektrical Characteristics at 20°C Frequency in MHz 1 10 16 20 31,25 62,5 100 250 450 Attenuation in dB/ 100 m per Standard * 2,1 6,0 7,6 8,5 10,8 15,5 19,9 33,0 - Typical data dB / 100 m 1,8 5,3 6,8 7,6 9,6 13,6 17,3 27,7 38,0 Near-end crosstalk loss in dB per Standard * 66,0 59,3 56,2 54,8 51,9 47,4 44,3 38,3 - Typical data dB / 100 m 100,0 100,0 100,0 100,0 100,0 97,0 95,0 90,0 85,0 PSNEXT in dB/ 100 m per Standard * 64,0 57,3 54,2 52,8 49,9 45,4 42,3 36,3 - Typical data dB / 100 m 98,0 98,0 98,0 98,0 98,0 95,0 93,0 88,0 83,0 ELFEXT in dB/ 100 m per Standard * 66,0 50,0 45,9 44,0 40,1 34,1 30,0 22,0 - Typical data dB / 100 m 93,0 93,0 93,0 93,0 90,0 86,0 83,0 70,0 54,0 PSELFEXT in dB/ 100 m per Standard * 64,0 47,0 43,0 41,0 37,1 31,1 27,0 19,0 - Typical data dB / 100 m 91,0 91,0 91,0 91,0 88,0 84,0 81,0 68,0 52,0 ACR in dB 98,2 94,7 93,2 92,4 90,4 82,4 77,7 62,3 47,0 *) Standard: Requirements on 100 m installed Category 6 cable for Class E cabling links (corresponds to EN 50288-5-1 ) page 3 of 3 subject to availability & technical change without prior notice Tel. + 65-6538 8628 Fax + 65-6538 8636 E -Mail: kfe.mktg@krone.com KRONE Far East Website: www.kroneasia.com KRONE STP (U/FTP*) 450/23 STP (U/FTP*) 450/23 FRNC Cat. 6 Cable Electrical Characteristics at 20°C (continuation) Max. loop resistance: 146 Ohm/km Max. resistance difference: 2% Insulation resistance: > 5000 MOhm x km Impedance Zo at 0,064 MHz: 125 Ohm ± 20% Impedance Zo at 1 - 100 MHz: 100 Ohm ± 15% Impedance Zo at 101 bis 250 MHz: 100 Ohm ± 18% Transfer impedance: < 10 mOhm per meter at 10 MHz Longitudinal conversion loss dB/ref. Length = 1000 m: > 46 dB at 64 kHz Longitudinal conversion loss dB/ref. Length = 1000 m: > 40 dB at 1 MHz Longitudinal conversion loss dB/ref. Length = 1000 m: > 20 dB at 100 MHz Mutual capacity: 43 pF/m Max. capacitance at 0,001 MHz: 1000 pF/km Propagation velocity > 10 MHz ( NVP * c ): 0,79 c Propagation delay > 10 MHz: 4,2 ns/m Skew: 4 ns/100m Mechanical Characteristics Wire insulation: Zero halogen foam/skin material Sheath material l: Zero halogen, flame-retardant Deployment area: Dry and damp rooms Max. temperature range during installation: 0°C up to +50 °C Max. operating temperature: -20 up to +60°C Min. bend radius for single flexure: 40 mm (over flat side) Min. bend radius during installation or pulling: 60 mm (over flat side) Ordering Information Type designation: STP 450/23 4P LSZH-3 Delivery: 500 m on one way drum Ordering number 4 pairs: TBA Type designation: STP 450/23 4P LSZH-3 Delivery: 1.000 m on one way drum Ordering number 4 pairs: TBA . + 65 -65 38 862 8 Fax + 65 -65 38 863 6 E -Mail: kfe.mktg @krone. com KRONE Far East Website: www.kroneasia.com KRONE STP (U/FTP*) 450/23 STP (U/FTP*) 450/23 FRNC. + 65 -65 38 862 8 Fax + 65 -65 38 863 6 E -Mail: kfe.mktg @krone. com KRONE Far East Website: www.kroneasia.com KRONE STP (U/FTP*) 450/23 STP (U/FTP*) 450/23 FRNC