Tài liệu KRONE - Datasheet - Cat 6 - Cable - S-STP ppt

Copper wire AWG 23/1 core insulation Aluminium foil copper braid outer jacket Category 6 Installation Cable S-STP, LSZH KRONE Far East 70 Bendemeer Road #06-02 Hiap Huat House Singapore 339940 Phone +65 6538-8628 Fax +65 6538-8636 http://www.kroneasia.com kfe.mktg@krone.com Application: n Installation cable within structured cabling systems acc. to prDIN EN 50173 (2001-10) n To be used in pathway systems Possible Services: n Ethernet 10 BaseT n Fast Ethernet 100 BaseT n Gigabit Ethernet 1000 BaseT n ATM 155 Mbit/s n TP-PMD 125 Mbit/s n Cable Sharing (Same or different services) n CDDI & TPDDI (FDDI on copper) n Token Ring with 4/16 Mbit/s n Analogue Telephone, ISDN Profile view: KRONE Premis NET ® (97045)-02.2002 subject to changes Thermal characteristcs: Transport and storage -20°C up to + 60°C Installation 0°C up to + 50°C Operation -20°C up to + 60°C Chemical Characteristics: Resistance to: LSZH: n Oil, fuel no n Acid, leach low n Organic solvents yes Fire Performance: Flame retardent ISO 60332-1, 60332-3 Kat.C Smoke density IEC 61034-1, 61034-2 Halogen-free IEC 60754-2 Corrosive gases no Propagation of fire no Heat of combastion 670 kJ/m (0,19 kwh/m) Electrical Characteristics: DC loop resistance typ. 158 Ohm/km Resistance unbalance max. 2 % Mutual capacity 45 pF/m Nominal velocity of Propagation (NVP-value) 80 % (0,8 c) Impedance 100 +/- 15 Ohm Screening attenuation up to1000 MHz/min. 60dB Transfer impedance at 10MHz nom. 5mOhm/m Insertion Loss and NEXT see table Frequency [MHz] 1 4 10 16 20 31,25 62,5 100 155 200 250 300 Insertion Loss [dB/100m] 1,9 3,6 5,7 7,2 8,1 10,1 14,4 18,3 23,1 26,2 29,3 32,3 NEXT [dB] 90,0 90,0 90,0 90,0 90,0 90,0 83,0 77,7 72,1 68,9 65,8 63,2 ACR [dB] 88,1 86,4 84,3 82,8 81,9 79,9 68,6 59,4 49,0 42,7 36,5 30,9 ELFEXT [dB] 90,0 90,0 90,0 90,0 90,0 87,0 84,0 73,0 76,0 68,0 66,0 63,0 RL [dB] 30,0 30,0 30,0 30,0 28,0 26,0 25,0 24,0 22,0 20,0 20,0 18,0 Ordering Information Order Number Cat.6 Installation Cable, S-FTP, LSZH, grey, round, spool 1000 m 66499 1 030-04 Design: Conductor bare copper wire AWG 23/1 (0,57 mm) PE-insulation with approx. 0,4 mm wall thickness, Core approx. 1,4 mm Lay up 4 x 2 cores paired Core colours: wh/bu, wh/og, wh/gn, wbn, pair in metal foil Overall shielding Tinned copper braid Outer jacket Halogen-free and flame retardant Material (LSFRZH) Colour: Grey Outer diameter: 7,6 mm Printing : KRONE PREMISNET (tm) 6499 1 030-04 HIGHWIRE LSZH-FR 4PR 23AWG 75C CATEGORY 6 S/FTP TO TIA/EIA 568 ISO/IEC 11801 MM/YY XXXXX* *MM-Month;YY-Year;XXXXX-metermarking Standardisation: n According to EN 50167, pr DIN EN 50173 (2001-10), CD2 ISO/IEC 11801 (2 nd edition 2001-04-19) and prEN 50288-5-1 (edition January 2001) n According to European Guideline 73/23/EWG (CE-marking) n 3 P (Third Party Testing) verified Mechanical Characteristics: n Bendradius During installation 8 x O.D. Installed 4 x O.D. n Weight approx. 66 kg/km Tensile strength 360N dB 0 10 20 30 40 50 60 70 80 90 100 1 10 100 1000 frequency [MHz] Insertion Loss [dB/100m] Next [dB] . jacket Category 6 Installation Cable S-STP, LSZH KRONE Far East 70 Bendemeer Road #0 6- 0 2 Hiap Huat House Singapore 339940 Phone +65 65 3 8-8 62 8 Fax +65 65 3 8-8 63 6 http://www.kroneasia.com kfe.mktg @krone. com Application: n. ISO 60 33 2-1 , 60 33 2-3 Kat.C Smoke density IEC 61 03 4-1 , 61 03 4-2 Halogen-free IEC 60 75 4-2 Corrosive gases no Propagation of fire no Heat of combastion 67 0