E1 DSX Front Cross-Connect Solutions The Complete DDF Solution E1 DSX Front Cross-Connect Solutions The ETSI E1 DSX Product Family The Application The Digital Signal Cross-connect (DSX) ETSI 2.048 Mbps family of products is ideal for Digital Distribution Frame (DDF) applications where cross-connecting, patching, testing and monitoring is required between two network elements. The Products The ETSI Skeleton Bay is the basis of ADC’s E1 DSX product offering. The fully assembled bay meets the standard ETSI 600mm wide x 2200mm tall footprint. The fuse panel and all the necessary cable management are factory installed in the bay making installation and ordering fast and easy. DSX panels are added in the field as needed. The ETSI skeleton bay is compatible with all ADC 64 termination DSX panels (FlexDSX™, PxPlus™ and DSX 64). A total of 768 twisted pair or coaxial terminations fit in each bay. M O I DSX Network Element A DSX Network Element B OUT IN PERMANENT EQUIPMENT CABLE Tx OUT OUT OUT IN IN Rx IN X-OUT X-IN PERMANENT EQUIPMENT CABLE Tx OUT X-OUT X-IN Rx IN OUT MON MON IN Semi- Permanent Cross Connect Jumper LED Tracer Wire Loaded ETSI Skeleton Bay FlexDSX PxPlus DSX 64 Empty ETSI skeleton bay One bay and three panel options to meet all your needs E1 DSX Front Cross-Connect Solutions Selecting a Panel: FlexDSX ™ , PxPlus ™ and DSX 64 Solutions FlexDSX: FlexDSX offers four-port jack access with dual monitor for applications where the cross- connect may be located far away or is inaccessible such as in collocation applications. The dual monitor port also allows for fast isolation of problems as both sides of the circuit can be accessed easily from one termination. The jacks are individually removable and the backplane terminations are removable in groups of four. PxPlus: Ideal for applications requiring 3 port jack access and true cost deferment as equipment cables can be preterminated and jacks can be added as needed. If the chassis has more than 60% of its terminations turned up within one year, DSX 64 may be a better choice for a high growth environment. DSX 64: Ideal for applications where individual circuit modularity is not required. DSX 64 is a fixed 64 circuit panel with three port jack access. Common Panel Features • 64 terminations per panel (Balun and twisted pair) - matches 2.048 Mbps equipment cabling breakouts • All panels mount into the ADC ETSI skeleton bay IBF-RSC007 – one platform for all applications • Tracer LED – eliminates manual tracing of cross-connect wires for fast circuit identification • Oversized labels – for complete circuit identification • In-service patching and circuit rearrangement – allows circuit maintenance to be completed during business hours without downtime by using ADC’s bridging office repeaters (Call your local ADC sales office for more information) • Balun terminations – increases density by converting 75 ohm equipment cables to 120 ohm for cross- connecting while still providing the flexibility of DSX jack access. Available in BNC and 1.6/5.6 Feature/Need FlexDSX PxPlus DSX 64 64 terminations/panel (Balun & twisted pair) ••• Mounts in IBF-RSC007 skeleton bay ••• 768 E1 terminations per bay ••• Tracer LED ••• Ability to prewire backplane ••• Oversized labels ••• In-service patching and circuit rearrangement ••• Balun options (BNC & 1.6/5.6) ••• Patching and monitoring capabilities ••• Removable jacks •• Dual monitor (4 port jacks) • Removable backplane • E1 DSX Front Cross-Connect Solutions FlexDSX ™ Four-Port (Dual Monitor) Jack Access FlexDSX is the only DSX panel in the industry that offers individual removable jacks, removable IN/OUT equipment cable terminations, and four port (bi- directional) test access capabilities. The four port jack system consists of IN and OUT jacks for direct access to the network element’s input and output signals, and DUAL MONITOR jacks for monitoring of the signal in both directions simultaneously at a single location. Dual monitors are especially beneficial for testing when the other side of the cross-connect is located far away, in another room, or is inaccessible (ie: collocation). FlexDSX panel with individual jack card pulled out Staggered jacks - allows industry standard patch cords to be used side-by-side Individual removable jacks Large labels - provides clear documentation of circuits 64 terminations per panel (Balun and twisted pair) - matches 2.048 Mbps equipment cabling breakouts Large front trough - prevents cable build-up FlexDSX (front view) Chassis are confi gured with IN/OUT interfaces in groups of four - for easy removal and minimal disturbance of adjacent circuits FlexDSX (rear view - 1.6/5.6 Balun version shown) Tracer LED - eliminates manual tracing of circuits for faster circuit identifi cation Four-port (dual monitor) jacks - allow quick isolation of problems in larger applications where the cross-connect may be located far away or is inaccessible FlexDSX four-port jack card E1 DSX Front Cross-Connect Solutions PxPlus ™ Three-Port Individual Jack Modularity The PxPlus panel was designed for E1 DSX cross-connect applications where individual jack modularity is required. The PxPlus system consists of a 64 circuit empty panel and individual three port jack access cards that are sold separately. The empty panel can be loaded into the bay and precabled. When service is ready to be turned up, the PxPlus jack cards are installed into the panel providing for true cost deferment. PxPlus panel with individual jack card pulled out Tracer LED - eliminates manual tracing of circuits for faster circuit identifi cation Large removable labels - provides easy documentation of circuits to help avoid mistakes while trouble-shooting PxPlus panel (shown fully loaded with circuit cards) Designed for individual jack modularity - jacks are ordered seperately and installed upon service turn-up PxPlus Panel (shown empty without circuit cards) Backplane can be fully prewired upon installation - allows circuit cards to be added as needed for tru cost deferment PxPlus panel (rear view - wire-wrap version shown) 64 terminations per panel (Balun and twisted pair) - matches equipment cabling breakouts Three-port (single monitor) jack access - allows easy circuit access for testing, patching and monitoring E1 DSX Front Cross-Connect Solutions DSX 64-Termination Panels Three-Port Fixed Panel Large removable labels - provides easy documentation of circuits to help avoid mistakes while trouble-shooting DSX 64 panel (front view) Each panel supports 64 E1 terminations and provides three-port jack access for monitoring, patching and testing. An LED provides easy identification of cross-connect cables by eliminating manual tracing of wires. The equipment (IN/OUT) cables are terminated on the rear of the chassis via wire-wrap and Balun options of 1.6/5.6 or BNC connectors. The cross-connects are terminated on the front via wire-wrap pins. Front wire-wrap cross-connect pins for easy circuit rearrangement DSX 64 panel (rear view - BNC Balun version shown) One part number - allows for easy ordering and installation DSX 64 Jackfi eld Three-port (single monitor) jack access - allows easy circuit access for testing, patching and monitoring 64 terminations per panel (Balun and twisted pair) - matches equipment cabling breakouts Tracer LED - eliminates manual tracing of circuits for faster circuit identifi cation E1 DSX Front Cross-Connect Solutions ADC ETSI DSX-1 Skeleton Bay ™ For FlexDSX, PxPlus, and DSX 64 Panels The ETSI Skeleton Bay is designed for the FlexDSX, PxPlus and DSX 64-termination panels. The fully assembled bay meets the standard ETSI 600mm wide x 2.2 meter tall footprint for easy office planning. Rack mounting will also accommodate standard 48.26 cm (19 inch) panels. Fuse panels and all the necessary cable management are factory installed in the bay making ordering and installation fast and easy. DSX panels are added in the field as needed. IN/OUT cable ways for equipment terminations support the use of either 120 ohm twisted pair or miniaturized coaxial cable. The skeleton bay can be mounted on either concrete or raised floor. Panels mount over the rings - no need for removal of rings during installation All metric hardware - allows easy replacement for misplaced screws Empty ETSI skeleton bay Extra rack space reserved for miscellaneous applications (ie. cross-aisle panels) - accomodates future growth High density - supports up to 12 panels or 768 E1 terminations (120 Ohm or 75 Ohm) per bay Single part number - simplifi es ordering and installation Rings and troughs - Preprovisioned jumper management ensures existing wiring is not disturbed during expansion or maintenance Cable tie down bars on the rear of the bay eliminate the need for fi ller panels and end guards 600mm width aligns perfectly with raised fl oor tile dimensions - simplifi es offi ce engineering and planning 600mm E1 DSX Front Cross-Connect Solutions Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our Web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 103100AE 7/06 Revison © 1999, 2006 ADC Telecommunications, Inc. All Rights Reserved . E1 DSX Front Cross-Connect Solutions The Complete DDF Solution E1 DSX Front Cross-Connect Solutions The ETSI E1 DSX Product Family. Removable backplane • E1 DSX Front Cross-Connect Solutions FlexDSX ™ Four-Port (Dual Monitor) Jack Access FlexDSX is the only DSX panel in the industry