Ảnh hưởng của sự pha tạp strontium, nickel đến cấu trúc và tính chất của vật liệu nano ferrite perovskite yttrium

ts,” Catal Sci Technol., vol 1, no 7, pp 1145–1148, 2011, doi: 10.1039/c1cy00199j [15] A A Saad, W Khan, P Dhiman, A H Naqvi, and M Singh, “Structural, optical and magnetic properties of perovskite (La1-xSrx)(Fe1-xNix)O3 , (x = 0.0, 0.1 & 2) nanoparticles,” Electron Mater Lett., vol 9, no 1, pp 77–81, 2013, doi: 10.1007/s13391-012-2103-1 [16] O Ben Mya and M Omari, “Synthesis and Characterization of Sr-doped LaFe0.7Ni0.3O3 perovskite,” Res J Pharm Biol Chem Sci., vol 6, no 4, p 734, 2015 [17] P Atkins, T Overton, J Rourke, M Weller, F Armstrong, and M Hagerman, Inorganic Chemistry - 5th edition 2010 [18] M Johnsson and P Lemmens, “Crystallography and chemistry of perovskites,” pp – 11, 2005 [19] R S Roth, “Classification of perovskite and other ABO3-type compounds,” J Res Natl Bur Stand (1934)., vol 58, no 2, p 75, 1957, doi: 10.6028/jres.058.010 63 [20] M A Ahmed, M S Selim, and M M Arman, “Novel multiferroic La0.95Sb0.05FeO3 orthoferrite,” Mater Chem Phys., vol 129, no 3, pp 705– 712, 2011, doi: 10.1016/j.matchemphys.2011.03.033 [21] F Galasso, R Smoluchowski, and N Kurti, “Structure, Properties and Preparation of Perovskite-Type Compounds,” Pergamon Press New York, vol 1st ed, no Chapter 2, pp 3–49, 1969 [22] J Á Quintana-cilleruelo, V K Veerapandiyan, M Deluca, M Alguer, and A Castro, “Mechanosynthesis of the Whole Y1−xBixMn1−xFexO3 Perovskite System: Structural Characterization and Study of Phase Transitions,” Materials (Basel)., vol 12, no 1515, pp 1–17, 2019 [23] P V Coutinho, F Cunha, and P Barrozo, “Structural, vibrational and magnetic properties of the orthoferrites LaFeO3 and YFeO3: A comparative study,” Solid State Commun., vol 252, pp 59–63, 2017, doi: 10.1016/j.ssc.2017.01.019 [24] C N R Rao, “The world of perovskite oxides: From dielectrics to superconductors,” Phys C Supercond its Appl., vol 153–155, pp 1762– 1768, 1988, doi: 10.1016/0921-4534(88)90470-4 [25] T Ishihara, “Perovskite Oxide for Solid Oxide Fuel Cells, Fuel Cells and Hydrogen Energy ”, Springer Sci Bus Media, vol Chaper 1, 2009 [26] T Ishihara, Perovskite Oxide for Solid Oxide Fuel Cells, no chapter 2009 [27] N Russo, P Palmisano, and D Fino, “Pd substitution effects on perovskite catalyst activity for methane emission control,” Chem Eng J., vol 154, no 1–3, pp 137–141, 2009, doi: 10.1016/j.cej.2009.05.015 [28] J Dho and N H Hur, “Magnetic and transport properties of lanthanum perovskites with B-site half doping,” Solid State Commun., vol 138, no 3, pp 152–156, 2006, doi: 10.1016/j.ssc.2006.02.008 [29] S Nieto, R Polanco, and R Roque-Malherbe, “Absorption kinetics of hydrogen in nanocrystals of BaCe0.95Yb0.05O3-δ proton-conducting perovskite,” J Phys Chem C, vol 111, no 6, pp 2809–2818, 2007, doi: 10.1021/jp067389i 64 [30] O Rosales-González, F Sánchez-De Jesús, C A Cortés-Escobedo, and A M Bolarín-Miró, “Crystal structure and multiferroic behavior of perovskite YFeO3,” Ceram Int., vol 44, no 13, pp 15298–15303, 2018, doi: 10.1016/j.ceramint.2018.05.175 [31] L Li, M Zhang, P Tian, W Gu, and X Wang, “Synergistic photocatalytic activity of LnFeO3 (Ln=Pr, Y) perovskites under visible-light illumination,” Ceram Int., vol 40, no PART A, pp 13813–13817, 2014, doi: 10.1016/j.ceramint.2014.05.097 [32] M V Berezhnaya, O V Al‟myasheva, V O Mittova, A T Nguyen, and I Y Mittova, “Erratum to: „Sol-Gel Synthesis and Properties of Y1–xBaxFeO3 Nanocrystals,‟” Russ J Gen Chem., vol 88, no 6, pp 1349–1349, 2018, doi: 10.1134/s1070363218060464 [33] V Đ Độ, “Các phương pháp vật lý hóa học,” NXB Đại học Quốc gia Hà Nội, 2004 [34] P T H Oanh, Chuyên đề Phân tích cấu trúc vật liệu vô cơ, Trường Đại học Sư phạm TPHCM 2011 [35] N A Tien et al., “Simple Synthesis of NdFeO3 Nanoparticles By the CoPrecipitation Method Based on a Study of Thermal Behaviors of Fe(III) and Nd(III) Hydroxides,” Crystals, vol 10, no 219ii, pp 4–9, 2020 [36] M Khajelakzay, R Shoja Razavi, M Barekat, M Naderi, and M Milani, “Synthesis of yttria nanopowders by two precipitation methods and investigation of synthesis conditions,” Int J Appl Ceram Technol., vol 13, no 1, pp 209–218, 2016, doi: 10.1111/ijac.12430 [37] S S Teixeira, A J M Sales, M P F Graỗa, and L C Costa, “Materials Science & Engineering B Yttrium ferrites with enhanced dielectric properties,” Mater Sci Eng B, no August 2017, pp 1–7, 2018, doi: 10.1016/j.mseb.2018.10.017 [38] J Saha and Y M Jana, “Synthesis , Structural Analysis and Vibrational Spectroscopic Study of YFeO3 perovskite,” vol 110023, 2018, doi: 10.1063/1.5033048 65 [39] J Saha, Y M Jana, G D Mukherjee, R Mondal, S Kumar, and H C Gupta, “Structure, Mössbauer spectroscopy and vibration phonon spectra in valence-bond force-field model approach for distorted perovskites AFeO3 (A = La, Y),” Mater Chem Phys., vol 240, p 122286, 2020, doi: 10.1016/j.matchemphys.2019.122286 [40] D J Deka, S Gunduz, T Fitzgerald, J T Miller, A C Co, and U S Ozkan, “Production of syngas with controllable H2/CO ratio by high temperature coelectrolysis of CO2 and H2O over Ni and Co- doped lanthanum strontium ferrite perovskite cathodes,” Appl Catal B Environ., vol 248, no February, pp 487–503, 2019, doi: 10.1016/j.apcatb.2019.02.045 [41] D Zheng et al., “LaNixFe1-xO3 (0 ≤ x ≤1) as photothermal catalysts for hydrocarbon fuels production from CO2 and H2O,” J Photochem Photobiol A Chem., vol 377, no March, pp 182–189, 2019, doi: 10.1016/j.jphotochem.2019.03.045 [42] A O Turky, M M Rashad, A M Hassan, E M Elnaggar, and M Bechelany, “Optical, electrical and magnetic properties of lanthanum strontium manganite La1-xSrxMnO3 synthesized through the citrate combustion method,” Phys Chem Chem Phys., vol 19, no 9, pp 6878– 6886, 2017, doi: 10.1039/c6cp07333f [43] W C Wang et al., “Synthesis and characterization of TiO2/YFeO3 and its photocatalytic oxidation of gaseous benzene,” Wuli Huaxue Xuebao/ Acta Phys - Chim Sin., vol 24, no 10, pp 1761–1766, 2008, doi: 10.1016/S18721508(08)60072-8 [44] L Xu et al., “Photothermal catalytic activity of combustion synthesized LaCoxFe1−xO3 (0 ≤ x ≤ 1) perovskite for CO2 reduction with H2O to CH4 and CH3OH,” RSC Adv., vol 7, no 73, pp 45949–45959, 2017, doi: 10.1039/C7RA04879C [45] M Ao, G H Pham, V Sage, and V Pareek, “Selectivity enhancement for higher alcohol product in Fischer-Tropsch synthesis over nickel-substituted La0.9Sr0.1CoO3 perovskite catalysts,” Fuel, vol 206, pp 390–400, 2017, doi: 66 10.1016/j.fuel.2017.06.036 [46] M K Warshi, V Mishra, V Mishra, R Kumar, and P R Sagdeo, “Possible origin of ferromagnetism in antiferromagnetic orthorhombic-YFeO3: A firstprinciples study,” Ceram Int., vol 44, no 12, pp 13507–13512, 2018, doi: 10.1016/j.ceramint.2018.04.181 [47] B S Nagrare, S S Kekade, B Thombare, R V Reddy, and S I Patil, “Hyperfine interaction, Raman and magnetic study of YFeO3 nanocrystals,” Solid State Commun., vol 280, no June, pp 32–38, 2018, doi: 10.1016/j.ssc.2018.06.004 [48] O Y Golubeva, V G Semenov, V S Volodin, and V V Gusarov, “Structural stabilization of Fe4+ Ions in perovskite-like phases based on the BiFeO3-SrFeOy system,” Glas Phys Chem., vol 35, no 3, pp 313–319, 2009, doi: 10.1134/S1087659609030122 [49] N A Tien, I Y Mittova, D O Solodukhin, O V Al‟Myasheva, V O Mittova, and S Y Demidova, “Sol-gel formation and properties of nanocrystals of solid solutions Y1-xCaxFeO3,” Russ J Inorg Chem., vol 59, no 2, pp 40–45, 2014, doi: 10.1134/S0036023614020156 [50] F Pedro-García, L G Betancourt-Cantera, A M Bolarín-Miró, C A CortésEscobedo, A Barba-Pingarrón, and F Sánchez-De Jesús, “Magnetoelectric coupling in multiferroic BiFeO3 by co-doping with strontium and nickel,” Ceram Int., vol 45, no 8, pp 10114–10119, 2019, doi: 10.1016/j.ceramint.2019.02.058 [51] A T Nguyen, H D Chau, T T L Nguyen, V O Mittova, and D T Huong, “Structural and magnetic properties of YFe(1-x)CoxO3 (0.1