Lecture professional practice issues bài giảng các vấn đề thực tiễn chuyên ngành

2/7/2020 THUYLOI UNIVERSITY CIVIL ENGINEERING FACULTY DIVISION OF CONSTRUCTION TECHNOLOGY AND MANAGEMENT Lecture PROFESSIONAL PRACTICE ISSUES Hanoi, 2/2020 TRƯỜNG ĐẠI HỌC THỦY LỢI KHOA CƠNG TRÌNH BỘ MƠN CƠNG NGHỆ VÀ QUẢN LÝ XÂY DỰNG Bài giảng CÁC VẤN ĐỀ THỰC TIỄN CHUYÊN NGÀNH Hà Nội, 2/2020 2/7/2020 THUYLOI UNIVERSITY Civil Engineering Faculty Division of Construction technology and Management PROFESSIONAL PRACTICE ISSUES Lecturer: Dr Dinh The Manh Dr Nguyen Ngoc Thang Dr Do Tuan Nghia Dr Nguyen Thi Thu Nga Email: dinhthemanh@tlu.edu.vn Cell phone: 0983 643 194 CONTENT Introduction of Construction Industry Dr Dinh The Manh Steel Design, Structural Analyses Dr Nguyen Ngoc Thang Geotechnical engineering in Construction Dr Do Tuan Nghia Hydraulics – Hydrology Dr Nguyen Thi Thu Nga Construction Technology Dr Dinh The Manh Field trip: 01 sessions Examination, test: final report 2/7/2020 THUYLOI UNIVERSITY Civil Engineering Faculty Division of Construction technology and Management PROFESSIONAL PRACTICE ISSUES CHAPTER 1: INTRODUCTION OF CONSTRUCTION INDUSTRY Lecturer: Dr Dinh The Manh Email: dinhthemanh@tlu.edu.vn Cellphone: 0983 643 194 INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review 1.2 Constructional Design 1.3 Construction works 1.4 Operation and Maintenance 2/7/2020 INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review  Constructional products: building, road, bridge, dam, hydropower, … INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review  Constructional products: building, road, bridge, dam, hydropower, … 2/7/2020 INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review  Constructional products: building, road, bridge, dam, hydropower, … INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review  Constructional products: building, road, bridge, dam, hydropower, … 10 2/7/2020 INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review  Constructional products: building, road, bridge, dam, hydropower, … 11 INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review  Percentage contribution to National Economy: – 8% total GDP depend on different National Malaysia 12 2/7/2020 INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review  Percentage contribution to National Economy: – 8% total GDP depend on different National Malaysia United States 13 INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review  Percentage contribution to National Economy: – 8% total GDP depend on different National Malaysia United States 14 2/7/2020 INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review  Percentage contribution to National Economy: – 6% total GDP depend on different National  Break-up of construction cost 15 INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review  Percentage contribution to National Economy: – 6% total GDP depend on different National  Break-up of construction cost  The size of construction products is the largest  Construction project consists of many diverse tasks and occupations  Construction project is affected by weather and climate  Construction products occupy large space 16 2/7/2020 17 INTRODUCTION OF CONSTRUCTION INDUSTRY 1.1 Construction Industry Review  Percentage contribution to National Economy: – 6% total GDP depend on different National  Break-up of construction cost  The size of construction products is the largest  Construction project consists of many diverse tasks and occupations  Construction project is affected by weather and climate  Construction products occupy large space  Construction project is built in long time 18 2/7/2020 19 20 10 2/7/2020 CONSTRUCTION TECHNOLOGY 5.2 Foundation Works  Concrete pile foundation: Cast in situ piles  Procedure Preparation: set up at drilling point, install bored liner Drilling hole, support boredhole by bentonite Insert reinforcing cage  pour concrtete, withdraw b.liner Load test at the site 261 CONSTRUCTION TECHNOLOGY 5.3 Excavation Works  Traditional method:  Procedure Preparation: setting out the site for excavation Calculating number of excavators, truck, bulldozer Ecavating & removing spoil 262 131 2/7/2020 CONSTRUCTION TECHNOLOGY 5.3 Excavation Works  Top-down method:  Procedure Preparation: diaphragm walls, ground floor slab & beams Calculating number of excavators, truck, bulldozer Ecavating & removing spoil 263 CONSTRUCTION TECHNOLOGY 5.4 Fill operation 264 132 2/7/2020 CONSTRUCTION TECHNOLOGY 5.4 Fill operation 265 CONSTRUCTION TECHNOLOGY 5.4 Fill operation 266 133 2/7/2020 CONSTRUCTION TECHNOLOGY 5.4 Fill operation  Materials: soil, sand, crush stone … 267 CONSTRUCTION TECHNOLOGY 5.4 Fill operation  Materials: soil, sand, crush stone … 268 134 2/7/2020 CONSTRUCTION TECHNOLOGY 5.4 Fill operation  Materials: soil, sand, crush stone … 269 CONSTRUCTION TECHNOLOGY 5.4 Fill operation  Equipments: excavator, dump truck, bulldozer, bladder, compactor (cam roller machine for soil including argil) 270 135 2/7/2020 CONSTRUCTION TECHNOLOGY 5.4 Fill operation  Equipments: excavator, dump truck, bulldozer, bladder, compactor (cam roller machine for soil including argil) 271 CONSTRUCTION TECHNOLOGY 5.4 Fill operation  Equipments: excavator, dump truck, bulldozer, bladder, compactor (cam roller machine for soil including argil) 272 136 2/7/2020 CONSTRUCTION TECHNOLOGY 5.4 Fill operation  Equipments: excavator, dump truck, bulldozer, bladder, compactor (cam roller machine for soil including argil) 273 CONSTRUCTION TECHNOLOGY 5.4 Fill operation  Equipments: excavator, dump truck, bulldozer, bladder, compactor (cam roller machine for soil including argil) 274 137 2/7/2020 CONSTRUCTION TECHNOLOGY 5.4 Fill operation  Equipments: excavator, dump truck, bulldozer, bladder, compactor (cam roller machine for soil including argil) 275 CONSTRUCTION TECHNOLOGY 5.4 Fill operation  Fill procedure:  Preparation: remove soft soil, materials, equipments  Place materials: thickness depends on compactor  Consolidation: roller compactor, cam roller compactor 276 138 2/7/2020 CONSTRUCTION TECHNOLOGY 5.5 Concrete works 277 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Materials: cement, sand, crush stone, admixtures  Formwork: 278 139 2/7/2020 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Materials: cement, sand, crush stone, admixtures  Formwork: 279 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Materials: cement, sand, crush stone, admixtures  Formwork: 280 140 2/7/2020 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Steel reinforced work: 281 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Steel reinforced work: 282 141 2/7/2020 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Steel reinforced work: 283 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Pure concrete: 284 142 2/7/2020 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Pure concrete: 285 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Pure concrete: 286 143 2/7/2020 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Pure concrete: 287 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Pure concrete: 288 144 2/7/2020 CONSTRUCTION TECHNOLOGY 5.5 Concrete works  Curing concrete: 289 THANK YOU FOR YOUR ATTENTION! 290 145 ... UNIVERSITY Civil Engineering Faculty Division of Construction technology and Management PROFESSIONAL PRACTICE ISSUES Lecturer: Dr Dinh The Manh Dr Nguyen Ngoc Thang Dr Do Tuan Nghia Dr Nguyen Thi Thu... Faculty Division of Construction technology and Management PROFESSIONAL PRACTICE ISSUES CHAPTER 1: INTRODUCTION OF CONSTRUCTION INDUSTRY Lecturer: Dr Dinh The Manh Email: dinhthemanh@tlu.edu.vn... Faculty Division of Construction technology and Management PROFESSIONAL PRACTICE ISSUES CHAPTER 2: STEEL DESIGN, STRUCTURAL ANALYSES Lecturer: Dr Nguyen Ngoc Thang Email: thangnn@tlu.edu.vn Mobile