| Tài liệu tham khảo |
Loại |
Chi tiết |
| [1] Herrmann J. and Delalio D., “Evaluating Sheet Metal Nesting Decisions” Technical research report, University of Maryland, April 1998, pages 1-26 |
Sách, tạp chí |
| Tiêu đề: |
Evaluating Sheet Metal Nesting Decisions |
|
| [2] Jeffrey W. Herrmann, David R. Delalio, “Algorithms for sheet metal nesting”, IEEE Transactions on robotics and automation, 2001 |
Sách, tạp chí |
| Tiêu đề: |
Algorithms for sheet metal nesting |
|
| [4] B. Б a б ae в , "O птимальньіҋ Pac кроҋ Ma териалов c Помощью ЭВМ ," Moсква, 1982 |
Sách, tạp chí |
| Tiêu đề: |
Oптимальньіҋ Pacкроҋ Maтериалов c ПомощьюЭВМ |
|
| [6] Adamowicz M. and Albalno, “Nesting Two-Dimensional Shapes in Rectangular Modules,” Computer Aided Design, V-8,1976, pp27-33 |
Sách, tạp chí |
| Tiêu đề: |
Nesting Two-Dimensional Shapes in Rectangular Modules |
|
| [7] Dori D.and M. Ben-Bassat, “Efficient Nesting of Congruent Convex Figures”, Communications of the ACM, v2, 1984, pp228-235 |
Sách, tạp chí |
| Tiêu đề: |
Efficient Nesting of Congruent Convex Figures |
|
| [9] Nee A.Y.C., “A Heuristics Algorithm for Optimum Layout of Metal Stamping Blanks,” Annals of the CIRP, v33, 1984, pp317-320 |
Sách, tạp chí |
| Tiêu đề: |
A Heuristics Algorithm for Optimum Layout of Metal Stamping Blanks |
|
| [10] S. K. Cheng, K. P. Rao, “ Large-scale nesting of irregular pattern using compact neighborhood algorithm”, J. Of Material Processing tech., 2000, 135- 140 |
Sách, tạp chí |
| Tiêu đề: |
Large-scale nesting of irregular pattern using compact neighborhood algorithm |
|
| [11] Qu W. and Sanders J. L. “A Nesting Algorithm for Irregular Parts and Factors Affecting Trim Losses”, International Journal of Production Research, v25, 1987, pp381-397 |
Sách, tạp chí |
| Tiêu đề: |
A Nesting Algorithm for Irregular Parts and Factors Affecting Trim Losses |
|
| [12] Karoupi F. and Loftus M. “Accumulating Diverse Shapes With Hexagonal Pavers”, International Journal of Production Research, V29, 1991, 1507-1509 |
Sách, tạp chí |
| Tiêu đề: |
Accumulating Diverse Shapes With Hexagonal Pavers |
|
| [13] K. Fujita, S. Akagi and N. Hirokawa, “Hybrid Approach for Optimal Nesting Using a Genetic Algorithm and a Local Minimization Algorithm” |
Sách, tạp chí |
| Tiêu đề: |
Hybrid Approach for Optimal Nesting Using a Genetic Algorithm and a Local Minimization Algorithm |
|
| [14] Heitor S. Lopes and Roberto Selow, , “ Genetic algorithm for nesting problem in Prcking industry”, Federal Tech. University of Parana, 2007 |
Sách, tạp chí |
| Tiêu đề: |
Genetic algorithm for nesting problem in Prcking industry |
|
| [15] Rahul Dighe, “Human Pattern Nesting Strategies in a Genetic Algorithms Framework,” Doctor of Science Thesis,USA, 1995 |
Sách, tạp chí |
| Tiêu đề: |
Human Pattern Nesting Strategies in a Genetic Algorithms Framework |
|
| [16] T. J.Nye. “Stamping Strip Layout for Optimal Raw Material Utilization”, Journal of Manufacturing Systems, Vol. 19, Issue 3, 2000, pages 239-248 |
Sách, tạp chí |
| Tiêu đề: |
Stamping Strip Layout for Optimal Raw Material Utilization |
|
| [17] Lam T. F., Sze W. S. and Tan S. T. “Nesting of Complex Sheet Metal Parts,” Computer Aided Design & Application, v4, 2007, pp169-179 |
Sách, tạp chí |
| Tiêu đề: |
Nesting of Complex Sheet Metal Parts |
|
| [33] K. A. Dowsland and W. B. Dowsland “Solution approaches to irregular nesting problems”, European Journal of Operational Reseach, Volume 84, Issue 3, 1995 |
Sách, tạp chí |
| Tiêu đề: |
Solution approaches to irregular nesting problems |
|
| [34] Cristina Ribeiro, Maria Antonia Carravilla, Jose F. Oliveira, “Applying constraint logic programming to the resolution of nesting problem”1998 |
Sách, tạp chí |
| Tiêu đề: |
Applying constraint logic programming to the resolution of nesting problem |
|
| [38] Hiroyuki Okano, “A scanline-based algorithm for 2D free-form packing problem”, IBM Research, Tokyo, 2011 |
Sách, tạp chí |
| Tiêu đề: |
A scanline-based algorithm for 2D free-form packing problem |
|
| [40] Edmund Burke, Graham Kendal, “Applying Ant algorithm and the No Fit Polygon to the nesting problem”, Spinger-Verlag Berlin Heidelberg, 1999 |
Sách, tạp chí |
| Tiêu đề: |
Applying Ant algorithm and the No Fit Polygon to the nesting problem |
|
| [42] Takashi Imamichi, Mutsunori Yagiura, Hiroshi Nagamochi, “An iterated search algorithm based on nonlinear programming for the irregular strip packing problem”, Technical Report, Japan 2007 |
Sách, tạp chí |
| Tiêu đề: |
An iterated search algorithm based on nonlinear programming for the irregular strip packing problem |
|
| [45] C. L. Bajaj, T. Dey, Polygon nesting and Robustness”, Kyushu, Japan, 1989 [46] E. Hopper, B. Turton, “A genetic algorithm for 2D industrial packingproblem”, Computer & Industrial Engineering 37, 1999 |
Sách, tạp chí |
| Tiêu đề: |
A genetic algorithm for 2D industrial packing problem |
|