| Tài liệu tham khảo |
Loại |
Chi tiết |
| [1] Tan Hung NGUYEN, Khanh Dien LE, Ngoc Phuong NGUYEN, Huy Bich NGUYEN, Thanh Nam NGUYEN, Tuyen VO, The Effect of Heating to the Formability of Titanium Sheet by SPIF Technology, ISSN: 1662-9795, Vol. 749, pp 171-177, 2017 |
Sách, tạp chí |
| Tiêu đề: |
The Effect of Heating to the Formability of Titanium Sheet by SPIF Technology |
|
| [2] Le Van Sy, Modeling of single point incremental forming process for metal and polymeric sheet, University of Padua, Department of innovation in Mechanics and Management, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Modeling of single point incremental forming process for metal and polymeric sheet |
|
| [3] Pham Van Trung, Vo Van Cuong, Le Khanh Dien, Vo Van Nang, Phan Dinh Tuan, Nguyen Thanh Nam, Deformation ability of single point incremental forming for themo-plastic composite materiasl, Tạp chí phát triển KH&CN, tập 14, số K2, 2011 |
Sách, tạp chí |
| Tiêu đề: |
Deformation ability of single point incremental forming for themo-plastic composite materiasl |
|
| [4] V.Franzen, L. Kwiatkowski, P.A.F. Martins, A.E. Tekkaya, Single point incremental forming of PVC, Elsevier, journal, 2008 |
Sách, tạp chí |
| Tiêu đề: |
Single point incremental forming of PVC |
|
| [5] Crina Radu, Effects of process parameters on the quality of parts processed by single point incremental forming, International Journal of Modern Manufacturing Technologies, ISSN 2067–3604, Vol. III, No. 2, 2011 |
Sách, tạp chí |
| Tiêu đề: |
Effects of process parameters on the quality of parts processed by single point incremental forming |
|
| [6] M. Rauch, J.Y. Hascoet, J.C. Hamann, Y. Plennel, A new approach for toolpath programming in Incremental Sheet Forming, Computer-Aided Design, vol. 41, no.12, p. 877-885, 2009 |
Sách, tạp chí |
| Tiêu đề: |
A new approach for toolpath programming in Incremental Sheet Forming |
|
| [7] G. Ambrogio, S. Bruschi, A. Ghiotti, L. Filice, Formability of AZ31 magnesium alloy in warm incremental forming process. 2009 |
Sách, tạp chí |
| Tiêu đề: |
Formability of AZ31 magnesium alloy in warm incremental forming process |
|
| [8] Radu Crina, New configuration of the SPIF process - a review, Journal of Engineering Studies and Research – Volume 16, No. 4, 2010 |
Sách, tạp chí |
| Tiêu đề: |
Journal of Engineering Studies and Research |
|
| [9] Ji, Y.H., Park, J.J., Formability of magnesium AZ31 sheet in the incremental forming at warm temperature, Journal of Materials Processing Technology, 201 (1- 3), p. 354-358, 2008 |
Sách, tạp chí |
| Tiêu đề: |
Formability of magnesium AZ31 sheet in the incremental forming at warm temperature |
|
| [11] David Adams, Electrically Assisted Single Point Incremental Forming, Department of Mechanical and Materials Engineering, Queen's University, Kingston, Canada |
Sách, tạp chí |
| Tiêu đề: |
Electrically Assisted Single Point Incremental Forming |
|
| [12] Le Van Sy, Nguyen Thanh Nam, Hot Incremental Forming Of Magnesium And Aluminum Alloy Sheets By Using Direct Heating System, Proceeding of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufactur, 2013 |
Sách, tạp chí |
| Tiêu đề: |
Hot Incremental Forming Of Magnesium And Aluminum Alloy Sheets By Using Direct Heating System |
|
| [13] Fan, G., Gao, L., Hussain, G., Zhaoli, Wu, Electric hot incremental forming: a novel technique, International Journal of Machine Tools and Manufacture, 48 (15), p. 1688-1692, 2008 |
Sách, tạp chí |
| Tiêu đề: |
Electric hot incremental forming: a novel technique |
|
| [14] J.R. Duflou, B. Callebaut, J. Verbert, H. De Baerdemaeker, Improved SPIF performance through dynamic local heating.: Elsevier,International Journal of Machine Tools & Manufacture, 2008 |
Sách, tạp chí |
| Tiêu đề: |
Improved SPIF performance through dynamic local heating |
|
| [15] L. Galdos, E. Sỏenz de Argandoủa, I. Ulacia, G. Arruebarrena, Warm incremental forming of magnesium alloys using hot fluid as heating media, Key Engineering Materials Vols. 504-506, 2012 |
Sách, tạp chí |
| Tiêu đề: |
Warm incremental forming of magnesium alloys using hot fluid as heating media |
|
| [16] Nguyen Thanh Nam, Phan Dinh Tuan, Vo Van Cuong, Le Khanh Dien, Nguyen Thien Binh, Le Trung Hieu, Research on the forming angle of A1050- H14 aluminum material processd by using singe point incremental forming technology (SPIF), Science & Technology Development, Vol 12, No.16, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Research on the forming angle of A1050- H14 aluminum material processd by using singe point incremental forming technology (SPIF) |
|
| [17] Nguyen Van Nang, Nguyen Thanh Nam, Le Khanh Dien, Nguyen Thien Binh, Nguyen Minh Tu, Experimental study of the forming possibility of ISF process for PVC plastic sheet, Tạp chí phát triển KH&CN, tập 15, sô K1, 2012 |
Sách, tạp chí |
| Tiêu đề: |
Experimental study of the forming possibility of ISF process for PVC plastic sheet |
|
| [18] Nguyễn Minh Khôi, Kh o Sát nh Hưởng C a Các Thông S Công Ngh Đ n Kh Năng Bi n D ng Dẻo Và Chất Lư ng B M t C a Vật Li u Tấm Khi Gia Công B ng Phương Pháp Bi n D ng Gia Tăng Đơn Đi m SPIF ( Single Point Incremental Forming), Luận văn thạc sĩ, Khoa Cơ Khí, Đại học Bách Khoa TP.HCM, 11/2009 |
Sách, tạp chí |
| Tiêu đề: |
Kh o Sát nh Hưởng C a Các Thông S Công Ngh Đ n Kh Năng Bi n D ng Dẻo Và Chất Lư ng B M t C a Vật Li u Tấm Khi Gia Công B ng Phương Pháp Bi n D ng Gia Tăng Đơn Đi m SPIF ( Single Point Incremental Forming) |
|
| [10] Zhang, Q., Guo, H., Xiao, F., Gao, L., Bondarev, A.B., Weidong, H., Influence of anisotropy of the magnesium alloy AZ31 sheets on warm negative |
Khác |
|