| Tài liệu tham khảo |
Loại |
Chi tiết |
| 1. Vũ Văn Ái, Bài giảng “Nguyên lý phá hủy”, trường đại học Bách Khoa, Tp. Hồ Chí Minh, 2004 |
Sách, tạp chí |
| Tiêu đề: |
Nguyên lý phá hủy |
|
| 3. Tran Duc Minh Chau, Han Kyung Nam, Dang Anh Tuan, Cuu Long JOC: “Drilling Efficiency & Solution for 8-1/2” basement section in CLJOC-Su Tu Vang field”, PVN Technical Forum, HCM, September 2009 |
Sách, tạp chí |
| Tiêu đề: |
Drilling Efficiency & Solution for 8-1/2” basement section in CLJOC-Su Tu Vang field |
|
| 4. Tran Duc Minh Chau, Le Phuoc Hao, Mai Cao Lan: “Breaking Challenge In Drilling Long Basement Horizontal Section by Combination of Mud Motor &AG-itator/Shock Tool”, Bach Khoa Ho Chi Minh University 11th Technical Forum, October 2009 |
Sách, tạp chí |
| Tiêu đề: |
Breaking Challenge In Drilling Long Basement Horizontal Section by Combination of Mud Motor & AG-itator/Shock Tool |
|
| 5. Schlumberger: “End of well report SV-7P, SV-8PI, SV-9PI, SV-10P”, 2009 6. Hughes Christensen: “Rock Strength Study in Su Tu Vang Field”, CLJOC, 2009 |
Sách, tạp chí |
| Tiêu đề: |
End of well report SV-7P, SV-8PI, SV-9PI, SV-10P”, 2009 6. Hughes Christensen: “Rock Strength Study in Su Tu Vang Field |
|
| 7. Mike Bugni, Paul Hudson, Torsak S., Schlumberger: “Cuu Long RSS-vorteX Basement Study”, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Cuu Long RSS-vorteX Basement Study |
|
| 9. Schlumberger: “PowerPak Steerable Motor Handbook”, 2004 10. Hughes Christensen: “Tricone Tech Training Manual”, 2003 11. Hughes Christensen, IADC Dull Grading System For Roller Bits |
Sách, tạp chí |
| Tiêu đề: |
PowerPak Steerable Motor Handbook”, 2004 10. Hughes Christensen: “Tricone Tech Training Manual |
|
| 12. S.L. Chen, Jim Dahlem, “Development and Field Application of Roller Cone Bits with Balanced Cutting Structure”, SPE 71393, presented at the 2001 SPE/ATCE Anuual Meeting held in New Orland, Louisiana on September 30 – October 3, 2001 |
Sách, tạp chí |
| Tiêu đề: |
Development and Field Application of Roller Cone Bits with Balanced Cutting Structure |
|
| 13. Neal J. Adams: “Drilling Engineering”, Tulsa, Oklahoma, 1995 14. Website: http://www.tungstenalloy.com/downloads/Carbide_Properties.pdf15. Website: http://www.tungstenalloy.com/downloads/Grade_Comparisons.pdf |
Sách, tạp chí |
| Tiêu đề: |
Drilling Engineering |
|