| Tài liệu tham khảo |
Loại |
Chi tiết |
| [2] Sood,A.K., Ohdar,R.K. and Mahapatra,S.S.,“Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method”, Journal of materials and design, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method |
|
| [3] Emmanuel Sabourin ,“Adaptive high-precision exterior high-speed interior layered manufacturing” , 2008 |
Sách, tạp chí |
| Tiêu đề: |
Adaptive high-precision exterior high-speed interior layered manufacturing |
|
| [4] Todd Grimm “Fused Deposition Modeling: A Technology Evaluation”, 2008 [5] T. Nancharaiah, “An experimental investigation on surface quality anddimensional accuracy of FDM components”, Thesis of the national institute of technology rourkela -2009 |
Sách, tạp chí |
| Tiêu đề: |
Fused Deposition Modeling: A Technology Evaluation”, 2008 [5] "T. Nancharaiah, “"An experimental investigation on surface quality and dimensional accuracy of FDM components |
|
| [6] Vedansh Chaturvedi “ Parametric optimization of fused deposition modeling using response surface methodology” Thesis of National Institute of Technology Rourkela, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Parametric optimization of fused deposition modeling using response surface methodology |
|
| [7] Ahn, S., Montero, M., Odell, D., Roundy, S., and Wright, P., “Anisotropic material properties of fused deposition modeling ABS”. Rapid prototyping Journal, pp. 248-257,2002 |
Sách, tạp chí |
| Tiêu đề: |
Anisotropic material properties of fused deposition modeling ABS |
|
| [8] Anoop Kumar Sood, “Study on Parametric Optimization of Fused Deposition Modelling (FDM) Process”. National institute of technology Rourkela India, 2011 |
Sách, tạp chí |
| Tiêu đề: |
Study on Parametric Optimization of Fused Deposition Modelling (FDM) Process |
|
| [9] Mohammad A M J Alhubail, “Statistical-based optimization of process parameters of fused deposition modelling for improved quality”. Thesis of the University of Portsmouth, 2012 |
Sách, tạp chí |
| Tiêu đề: |
Statistical-based optimization of process parameters of fused deposition modelling for improved quality |
|
| [10] Mahapatra, S., Sood, A., Patel, S., and Sahu, “ Optimization of Process Parameters in Fused Depostion Modelling using Weighted Principal Component Analysis”, Administrative Staff College of India (ASCI), Hyderabad, India, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Optimization of Process Parameters in Fused Depostion Modelling using Weighted Principal Component Analysis |
|
| [11] Anna bellini –New developments in fused deposition modeling of ceramics,Thesis of technical university of denmark, lyngby, Denmark |
Sách, tạp chí |
|
| [12] Jia-fan zhang-Filament geometrical model and nozzle trajectory analysis in the fused deposition modeling process. Thesis of Jzhejiang university 2009 10(3):370-376 |
Sách, tạp chí |
| Tiêu đề: |
Jia-fan zhang"-Filament geometrical model and nozzle trajectory analysis in the fused deposition modeling process |
|
| [13] Lee, B., Abdullah, J., and Khan, Z., “Optimization of rapid prototyping parameters for production of flexible ABS object”. Journal of Materials Processing Technology, pp. 54-61, 2005 |
Sách, tạp chí |
| Tiêu đề: |
Optimization of rapid prototyping parameters for production of flexible ABS object |
|
| [14] Rajan Bansal, “Improving dimensional accuracy of fused deposition modelling (FDM) parts using response surface methodology”. Thesis of National Institute of Technology Rourkela, 2011 |
Sách, tạp chí |
| Tiêu đề: |
Improving dimensional accuracy of fused deposition modelling (FDM) parts using response surface methodology |
|
| [15] Ranjeet Kumar Sahu, “ An investigation on dimensional accuracy of fused deposition modeling (FDM) processed parts using Fuzzy logic”. Thesis of National Institute of Technology Rourkela, 2011 |
Sách, tạp chí |
| Tiêu đề: |
An investigation on dimensional accuracy of fused deposition modeling (FDM) processed parts using Fuzzy logic |
|
| [16] PGS.TS Nguyễn Hữu Lộc “Quy hoạch và phân tích thực nghiệm”, nhà xuất bản đại học quốc gia TP. HCM, 2011 |
Sách, tạp chí |
| Tiêu đề: |
Quy hoạch và phân tích thực nghiệm"” |
| Nhà XB: |
nhà xuất bản đại học quốc gia TP. HCM |
|
| [17] PGS.TS Đặng Văn Nghìn, “Bài giảng môn học hệ thống sản xuất tiên tiến.”, Khoa cơ khí, trường ĐHBK-ĐHQG TPHCM, 2010. [24] Các website về vật liệu |
Sách, tạp chí |
| Tiêu đề: |
Bài giảng môn học hệ thống sản xuất tiên tiến |
|
| [1] Chee Chua Kai ”Rapid Prototyping Principles and Applications” , Nanyang , Singapore |
Khác |
|