THÔNG TIN TÀI LIỆU
Thông tin cơ bản
Định dạng | |
---|---|
Số trang | 88 |
Dung lượng | 6,8 MB |
Nội dung
Ngày đăng: 27/01/2021, 09:04
Nguồn tham khảo
Tài liệu tham khảo | Loại | Chi tiết | ||
---|---|---|---|---|
[1] Christian Louter, Jan Belis, Frederic Veer, Jean-Paul Lebet. Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size. Engineering Structures 36 (2012) 292–301 | Sách, tạp chí |
|
||
[2] Louter C. Fragile yet Ductile – Structural aspects of reinforced glass beams. Dissertation TU Delft, ISBN: 978-90-8570-743-1, April 2011 | Sách, tạp chí |
|
||
[3] Kreher K, Natterer J. Timber-Glass Composite Girders for a Hotel in Switzerland. Structural Engineering International 2004. Vol.14. No.2. Pp 46-54 | Sách, tạp chí |
|
||
[4] Freytag, B. Glass-Concrete Composite Technology. In Structural Engineering International 2/2004, pp. 111-117 | Sách, tạp chí |
|
||
[5] FP,Veer, FA,Hobbelman, GJ, Louter P.C. Stainless steel reinforced and post- tensioned glass beams. International conference on experimental mechanics, icem12, advances in experimental mechanics (pp. #1-#9), Bari: Politecnico di Bari, (2004) | Sách, tạp chí |
|
||
[6] Louter PC, Heusden J van, Veer FA, Vamberský JNJA, Boer HR de, Versteegen J. Post-tensioned glass beams. In EE Gdoutos (Ed.), Fracture of Nano and Engineering Materials and Structures, pg. 1-9, Dordrecht: Springer, 2006 | Sách, tạp chí |
|
||
[8] European Standard EN 572-1:2004. Glass in building - Basic soda lime silicate glass products – Part 1: Definitions and general physical and mechanical properties. CEN; 2004 | Sách, tạp chí |
|
||
[9] J. Belis, J. Depauw, D. Callewaert, D. Delince, R. Van Impe. Failure mechanisms and residual capacity of annealed glass/SGP laminated beams at room temperature. Engineering Failure Analysis 16 (2009) 1866–1875 | Sách, tạp chí |
|
||
[10] Huntsman. Araldite AV ARALDITE® AW 106 Resin Hardener HV 953U MULTI-PURPOSE EPOXY Cambridge, www.araldite.com | Sách, tạp chí |
|
||
[11] Christian Louter, Jan Belis, Frederic Veer, Jean-Paul Lebet. Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size. Engineering Structures 36 (2012) 292–301 | Sách, tạp chí |
|
||
[12] Christian Louter, Fred Veer, Gerrie Hobbelman. Reinforcing glass, effects of reinforcement geometry and bonding technology. Glass Performance Days 2007 | Sách, tạp chí |
|
||
[13] Louter, P.C. & Belis, J. & Bos, F.P. & Veer, F.A. & Hobbelman G.J. 2005. Reinforced Glass Cantilever Beams. Proceedings of Glass Processing Days 2005, Tampere, Finland | Sách, tạp chí |
|
||
[14] Louter PC, Belis J, Bos FP, Callewaert D, Veer FA. Experimental investigation of the temperature effecton the structural response of SG-laminated reinforced glass beams. Engineering Structures 2010; 32(6):1590-1599 | Sách, tạp chí |
|
||
[15] European Standard EN 572-2 :2004. Glass in Building –Basic Soda lime silicate glass products –part 2: Float glass. CEN; 2004 | Sách, tạp chí |
|
||
[7] P.C. (Christian) Louter. Adhesively bonded reinforced glass beams. HERON Vol. 52 (2007) No. 1/2 | Khác |
TRÍCH ĐOẠN
TÀI LIỆU CÙNG NGƯỜI DÙNG
TÀI LIỆU LIÊN QUAN