| Tài liệu tham khảo |
Loại |
Chi tiết |
| [1] Awais Ahmed (2009). eXtended Finite Element Method (XFEM)-Modeling arbitrary discontinuities and Failure analysis. Master thesis |
Sách, tạp chí |
| Tiêu đề: |
eXtended Finite Element Method (XFEM)-Modeling arbitrary discontinuities and Failure analysis |
| Tác giả: |
Awais Ahmed |
| Năm: |
2009 |
|
| [2] Ankitkumar B. Makwana, Khushbu C. Panchal, and Anish H. Gandhi (2014). Stress Analysis of Functionally Graded Material Plate with Cut-out. International Journal of Advanced Mechanical Engineering, Volume 4, Number 5, pp. 495-500 |
Sách, tạp chí |
| Tiêu đề: |
International Journal of Advanced Mechanical Engineering |
| Tác giả: |
Ankitkumar B. Makwana, Khushbu C. Panchal, and Anish H. Gandhi |
| Năm: |
2014 |
|
| [3] D.V. Kubair , B. Bhanu-Chandar (2008). Stress concentration factor due to a circular hole in functionally graded panels under uniaxial tension. International Journal of Mechanical Sciences, 50, pp. 732–742 |
Sách, tạp chí |
| Tiêu đề: |
International Journal of Mechanical Sciences |
| Tác giả: |
D.V. Kubair , B. Bhanu-Chandar |
| Năm: |
2008 |
|
| [4] Glaucio H. Paulino, Alok Sutradhar and L. J. Gray (2002). Boundary Element Methods for Functionally Graded Materials. International Association for Boundary Element Methods, UT Austin, TX, USA |
Sách, tạp chí |
| Tiêu đề: |
International Association for Boundary Element Methods |
| Tác giả: |
Glaucio H. Paulino, Alok Sutradhar and L. J. Gray |
| Năm: |
2002 |
|
| [5] Nguyen Thanh Nha, Tran Kim Bang, Bui Quoc Tinh, and Truong Tich Thien (2013). Elastostatic analysis of isotropic and orthotropic functionally graded structures by meshfree radial point interpolation method. The 13th conference on science and technology, Ho Chi Minh city University of Technology |
Sách, tạp chí |
| Tiêu đề: |
The 13th conference on science and technology |
| Tác giả: |
Nguyen Thanh Nha, Tran Kim Bang, Bui Quoc Tinh, and Truong Tich Thien |
| Năm: |
2013 |
|
| [6] N. Sukumar, D.L. Chopp, N. Moes and T. Belytschko (2000). Modeling holes and inclusions by level sets in the extended finite-element method. Comput.Methods Appl. Mech. Engrg, 190 -2001, pp. 6183–6200 |
Sách, tạp chí |
| Tiêu đề: |
Comput. "Methods Appl. Mech. Engrg |
| Tác giả: |
N. Sukumar, D.L. Chopp, N. Moes and T. Belytschko |
| Năm: |
2000 |
|
| [7] Parveen K. Saini, Mayank Kushwaha (2014). Stress Variation around a Circular Hole in Functionally Graded Plate under Bending. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, Vol:8 No:3, pp.548–522 |
Sách, tạp chí |
| Tiêu đề: |
International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering |
| Tác giả: |
Parveen K. Saini, Mayank Kushwaha |
| Năm: |
2014 |
|
| [8] Quanquan Yang, Cun-Fa Gao and Wentao Chen (2010). Stress analysis of a functional graded material plate with a circular hole. Arch Appl Mech, 80, pp. 895–907 |
Sách, tạp chí |
| Tiêu đề: |
Arch Appl Mech |
| Tác giả: |
Quanquan Yang, Cun-Fa Gao and Wentao Chen |
| Năm: |
2010 |
|