1. Trang chủ
  2. » Kỹ Thuật - Công Nghệ

Sửa chữa DAEWOO-LACETTI 2010 - P9

20 341 1
Tài liệu đã được kiểm tra trùng lặp

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 20
Dung lượng 2,89 MB

Nội dung

The Daewoo Lacetti is a compact car made by the South Korean automaker GM Daewoo since 2002. The first-generation Lacetti was available as a four-door sedan, a five-door hatchback or a five-door station wagon.

NUBIRA/LACETTI BODY DIMENSION 8–1SECTION 8BODY DIMENSIONCONTENTS1. BODY DRAWING 8 – 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.UNDER BODY 8–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2.FRONT PANEL 8–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3.ENGINE ROOM 8–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4.BACK PANEL LOWER 8–9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5.SIDE OUTER 8–11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2. REPAIR DRAWING 8 – 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1.FRAME DOOR OPENING 8–13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2.WINDSHIELD AND REAR GLASS 8–15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3. GAP CHART 8 – 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–2 BODY DIMENSION NUBIRA/LACETTI1. BODY DRAWING1–1. UNDER BODYNOTCHBACK Unit: mm (in.)Fig. 1 NUBIRA/LACETTI BODY DIMENSION 8–3HATCHBACKFig. 2 8–4 BODY DIMENSION NUBIRA/LACETTIFRONT FRAME Unit: mm (in.)Fig. 3 NUBIRA/LACETTI BODY DIMENSION 8–5REAR FRAME Unit: mm (in.)NOTCHBACKFig. 4 8–6 BODY DIMENSION NUBIRA/LACETTIHATCHBACKFig. 5 NUBIRA/LACETTI BODY DIMENSION 8–71–2. FRONT PANELUnit: mm(in.)Fig. 6 8–8 BODY DIMENSION NUBIRA/LACETTI1–3. ENGINE ROOMUnit: mm(in.)Fig. 7 NUBIRA/LACETTI BODY DIMENSION 8–91–4. BACK PANEL LOWERNOTCHBACK Unit: mm(in.)Fig. 8 8–10 BODY DIMENSION NUBIRA/LACETTIHATCHBACKFig. 9 123doc.vn

Ngày đăng: 30/10/2012, 08:48

TÀI LIỆU CÙNG NGƯỜI DÙNG

  • Đang cập nhật ...

TÀI LIỆU LIÊN QUAN