Bu lông, Gu Jông, đai ốc theo tiêu chuẩn - P5

Catalogue Bu lông, Gu Jông, đai ốc theo tiêu chuẩn

Revisione generale05 10/01 General revision R. Rainis Toso U. Moro D.DTN CCUT UQERipristinato dadi classe 8 zincati04 01/96 Reused galvanized nuts class 8 Zorzut Musina Dalla Franc.DTN DE UGQAggiunto M39x3 e M45x3 per dadi DIN 93403 03/95 Added M39x3 and M45x3 for nuts DIN 934 Zorzut Musina Dalla Franc.UGQ/NOR DE DQSElim. classe 5 e dadi zincati classe 802 12/94 Deleded class 5 and zinc coated nuts class 8 Zorzut Tomat Dalla Franc.UGQ/NOR UIL/MH DQSNuova edizione01 09/93 First issue Zorzut Musina CoassinUGQ/NOR DE DQSREV. DATA DESCRIZIONE MODIFICA REDATTO CONTROLLATO APPROVATODATE DESCRIPTION OF MODIFICATION COMPILED CHECKED APPROVEDSTANDARD N°REV. 05PAGINAPAGEDIOFSOSTITUISCEREPLACES3.100.601 - 3.150.6003.150.601Dadi - Tutti i Tipi -Nuts - All Types -According to law Danieli&C. considers this document to be a company secret and thereforeprohibits any person to reproduce it or make it known in whole or in part to other parties or tocompetitors without specific written authorization of Danieli's ManagementA termini di legge la DANIELI & C. S.p.A. considera questo documento come segreto aziendale condivieto per chiunque di riprodurlo e/o di renderlo comunque noto, in tutto o in parte, a terzi, ovvero aditte concorrenti, senza specifica autorizzazione scritta della Direzione DANIELI.1 253.100.600 STANDARD N°REV. 05PAGINAPAGEDIOFSOSTITUISCEREPLACES3.100.601 - 3.150.6003.150.601Dadi - Tutti i Tipi -Nuts - All Types -2 253.100.600INDICE DEI CONTENUTI1 - SCOPO .Pag. 32 - ABBREVIAZIONI Pag. 33 - APPLICABILITA' .Pag. 34 - DEFINIZIONI Pag. 35 - RIFERIMENTI Pag. 36 - RESPONSABILITA' .Pag. 57 - NORMA .Pag. 67.1 - INDICAZIONI GENERALI .Pag. 67.2 - NOTE .Pag. 6ALLEGATI01-Dadi Esagonali EN 24032 - EN 28673Tipo 1 (STD) Pag. 7A01.1- Destri .Pag. 7A01.2- Sinistri Pag. 8A01.3- Destri - Resilienza -40°C Pag. 902-Dadi Esagonali EN 24033 - EN 28674 Tipo 2 (Alti) .Pag. 1003-Dadi Esagonali EN 24035 - EN 28675 (Bassi) .Pag. 1104-Dadi Esagonali Autofrenanti A04.1- inserto non metallico EN ISO 7040Tipo 1 (STD) - (DIN 6924 - UNI 7473) .Pag. 12A04.2- inserto metallico EN ISO 7042Tipo 2 (Alti) - (DIN 6925) Pag. 1305-Dadi Esagonali Autobloccanti DIN 7967 .Pag. 1406-Dadi Esagonali ad intagli (per copiglie) A06.1- Normali (STD) DIN 935-1 - (UNI 5593) .Pag. 15A06.2- Bassi DIN 979 - (UNI 5594) .Pag. 1650-ASME "Metrici" - Dadi .Pag. 1751-Dadi Esagonali ASME B18.2.4.1M Tipo 1 (STD)(EN 24032 - EN 28673) Pag. 17A51.1- con certificazione (EN 10204 - 3.1B) .Pag. 17A51.2- senza certificazione (EN 10204 - 2.2) Pag. 18A51.3- Destri - Resilienza -73°Csenza certificazione (EN 10204 - 2.2) .Pag. 1960-ASME "Inch" - Dadi .Pag. 2061-Dadi Esagonali ASME B18.2.2 .Pag. 20A61.1- Esagonali STD (EN 10204 - 2.2) .Pag. 20A61.2- Esagonali STD Bassi (EN 10204 - 2.2) .Pag. 21A61.3- Esagonali Pesanti (EN 10204 - 2.2) .Pag. 22A61.4- Esagonali Pesanti Bassi (EN 10204 - 2.2) Pag. 2380-Applicazioni particolari - Dadi .Pag. 24A81-Filetti riportati (HeliCoil) DIN 8140-1 .Pag. 24CONTENTS1 - PURPOSE Page 32 - ABBREVIATIONS Page 33 - APPLICATION Page 34 - DEFINITIONS .Page 35 - REFERENCES Page 36 - RESPONSIBILITY .Page 57 - STANDARD Page 67.1 - GENERAL INDICATIONS .Page 67.2 - NOTES Page 6ANNEXES01-Hexagon nuts EN 24032 - EN 28673Style 1 (STD) Page 7A01.1- Right .Page 7A01.2- Left .Page 8A01.3- Right - Impact test -40°C .Page 902-Hexagon Nuts EN 24033 - EN 28674 Style 2 (Thick) Page 1003-Hexagon Nuts EN 24035 - EN 28675 (Thin) Page 1104-Prevaling Torque Type Hexagon NutsA04.1- non-metallic insert EN ISO 7040Style 1 (STD) - (DIN 6924 - UNI 7473) .Page 12A04.2- metallic insert EN ISO 7042Style 2 (Thick) - (DIN 6925) Page 1305-Self Locking Counter Nuts DIN 7967 .Page 1406-Hexagon slotted and castle Nuts (for split pin)A06.1- Normal (STD) DIN 935-1 - (UNI 5593) .Page 15A06.2- Thin DIN 979 - (UNI 5594) Page 1650-ASME "Metrics" - Nuts .Page 1751-Hexagon nuts ASME B18.2.4.1M Style 1 (STD)(EN 24032 - EN 28673) Page 17A51.1- with certificates (EN 10204 - 3.1B) .Page 17A51.2- without certificates (EN 10204 - 2.2) .Page 18A51.3- Right - Impact test -73°C without certificates (EN 10204 - 2.2) Page 1960-ASME "Inch" - Nuts .Page 2061-Hexagon nuts ASME B18.2.2 Page 20A61.1- Hexagons STD (EN 10204 - 2.2) Page 20A61.2- Hexagons STD Jams (EN 10204 - 2.2) .Page 21A61.3- Heavy Hexagons (EN 10204 - 2.2) Page 22A61.4- Heavy Hexagon Jams (EN 10204 - 2.2) .Page 2380-Specific applications - Nuts Page 24A81-Wire thread inserts (HeliCoil) DIN 8140-1 Page 24 STANDARD N°REV. 05PAGINAPAGEDIOFSOSTITUISCEREPLACES3.100.601 - 3.150.6003.150.601Dadi - Tutti i Tipi -Nuts - All Types -3 253.100.6001 - SCOPOLa presente Norma ha lo scopo di stabilire i dadi (tutti itipi) da utilizzare nella progettazione e fabbricazionedi macchinari DANIELI.2 - ABBREVIAZIONIVengono utilizzate solo ed esclusivamente abbrevia-zioni codificate dalla Normativa di riferimento e appli-cabili a livello internazionale.3 - APPLICABILITA'La presente Norma si applica ai Disegni e distinte dimateriali emessi dalla DANIELI. E' applicabile sia almontaggio in sede che a quello in cantiere e può esse-re utilizzata anche per montaggi privi di disegno e/odistinte facendo riferimento esclusivamente ai codiciDANIELI citati nella presente Norma.4 - DEFINIZIONILa terminologia utilizzata nella presente Norma e lerelative definizioni sono riportate nei documenti elen-cati nel capitolo 5 "RIFERIMENTI".5 - RIFERIMENTILe Norme citate nel presente paragrafo si intendonosempre applicabili nello stato di revisione corrente.NORME DANIELI 2.8.020 - Prescrzioni per la subfornitura di bulloneria e simili.NORMATIVA INTERNAZIONALE:EUROPEA (EN, DIN, UNI)INTERNAZIONALE (ISO)AMERICANA (ASME, ASTM)ASME B 1.1 : Unified Inch Screw Threads (UN and UNRThread Form).ASME B 1.13M : Metric Screw Threads - M Profile.ASME B 16.5 : Pipe Flanges and Flanged Fittings.ASME B 18.2.2 : Square and Hex Nuts (Inch Series).ASME B 18.2.4.1M : Metric hex nuts, style 1.ASTM A 194/A 194M-96 : Standard Specification for Carbonand Alloy Steel Nuts for Bolts for High-Pressure andHigh-Temperature Service.ASTM A 320/A 320M-94a : Standard Specification for AlloySteel Bolting Materials for Low-Temperature Service.ASTM A 563-94 : Standard Specification for Carbon andAlloy Steel Nuts.ASTM A 563M-93 : Standard Specification for Carbon andAlloy Steel Nuts (Metric).DIN 13-1/-2/-3/-4/-5/-6/-7/-8/-9/-10/-11/-12/-12 Suppl./-13/-14/-15/-19/-20/-21/-22/-23/-24/-25/-26/-27/-28/-50/-51/-52 : ISO metric screw threads; .DIN 439-2 - (DIN 439) : SOSTITUITA DA EN 24035 & EN28675. Hexagon thin nuts.DIN 934 : SOSTITUITA DA EN 24032 & EN 28673. Hexagonnuts; metric thread, finish m and mg.DIN 935-1 : Hexagon slotted and castle nuts - Part 1: Metriccoarse and fine pitch thread, product grades A and B.DIN 936 : SOSTITUITA DA EN 24035 & EN 28675. M8 toM52 and M8x1 to M52x3 hexagon thin nuts; productsgrades A and B.1 - PURPOSEThis STD defines the nuts (all types) they shall al-ways be applied in the design and manufacture ofDANIELI machinery. 2 - ABBREVIATIONSThese are used only when codified by referenceNorms and internationally applicable.3 - APPLICATION This STD applies to drawings and lists issued by Da-nieli. The STD applies to both the installation in theworkshop and at the building site. The STD can alsobe used for erection works without drawing and/orlist; in this case if refers only to the Danieli codes men-tioned in this STD.4 - DEFINITIONSThe terminology used in this STD and the relevantdefinitions are the ones applied to the documentsmentioned in Chapter 5 - REFERENCES.5 - REFERENCESThe STDs mentioned in this paragraph always applyto the updated revision.DANIELI STANDARDS2.8.020 - Prescriptions for the subsupply of fittings and similar.INTERNATIONAL STDs:EUROPEAN (EN, DIN, UNI)INTERNAZIONAL (ISO)AMERICAN (ASME, ASTM)ASME B 1.1 : Unified Inch Screw Threads (UN and UNRThread Form).ASME B 1.13M : Metric Screw Threads - M Profile.ASME B 16.5 : Pipe Flanges and Flanged Fittings.ASME B 18.2.2 : Square and Hex Nuts (Inch Series).ASME B 18.2.4.1M : Metric hex nuts, style 1.ASTM A 194/A 194M-96 : Standard Specification forCarbon and Alloy Steel Nuts for Bolts for High-Pressureand High-Temperature Service.ASTM A 320/A 320M-94a : Standard Specification for AlloySteel Bolting Materials for Low-Temperature Service.ASTM A 563-94 : Standard Specification for Carbon andAlloy Steel Nuts.ASTM A 563M-93 : Standard Specification for Carbon andAlloy Steel Nuts (Metric).DIN 13-1/-2/-3/-4/-5/-6/-7/-8/-9/-10/-11/-12/-12 Suppl./-13/-14/-15/-19/-20/-21/-22/-23/-24/-25/-26/-27/-28/-50/-51/-52 : ISO metric screw threads; .DIN 439-2 - (DIN 439) : REPLACED BY EN 24035 & EN28675. Hexagon thin nuts.DIN 934 : SOSTITUITA DA EN 24032 & EN 28673.Hexagon nuts; metric thread, finish m and mg.DIN 935-1 : Hexagon slotted and castle nuts - Part 1: Metriccoarse and fine pitch thread, product grades A and B.DIN 936 : REPLACED BY EN 24035 & EN 28675. M8 toM52 and M8x1 to M52x3 hexagon thin nuts; productsgrades A and B. STANDARD N°REV. 05PAGINAPAGEDIOFSOSTITUISCEREPLACES3.100.601 - 3.150.6003.150.601Dadi - Tutti i Tipi -Nuts - All Types -4 253.100.600DIN 979 : Hexagon thin slotted nuts and castle nuts withmetric coarse and fine pitch thread - Product grades Aand B.DIN 6924 : Prevailing torque type hexagon nuts withnonmetallic insert.DIN 6925 : Prevailing torque type all-metall hexagon nuts.DIN 7967 : Self Loching Counter Nuts.DIN 8140-1 : Wire thread inserts for ISO metric screwthreads. Part 1: Dimensions and technical deliveryconditions.DIN 17222 : Cold Rolled Steel Strips for Springs; TechnicalConditions of Delivery.EN ISO 898-2 : SOSTITUIRA' EN 20898-2. Caratteristichemeccaniche degli elementi di collegamento in acciaio alcarbonio e acciaio legato - Parte 2: Dadi con carichi diprova determinati. Filettatura a passo grosso.EN ISO 898-6 : Caratteristiche meccaniche degli elementi dicollegamento in acciaio al carbonio e acciaio legato - Part 6:Dadi con carichi di prova determinati. Filettatura a passo fine.EN ISO 1234 : Copiglie.EN ISO 3506-2 : Caratteristiche meccaniche degli elementidi collegamento di acciaio inossidabile resistente allacorrosione - Parte 2: Dadi.EN ISO 7040 : Dadi esagonali autofrenanti (con inserto nonmetallico), tipo 1 - Classi di resistenza 5, 8 e 10.EN ISO 7042 : Dadi esagonali autofrenanti interamentemetallici, tipo 2 - Classi di resistenza 5, 8, 10 e 12.EN 10083-1+A1 : Acciai da bonifica - Condizioni tecniche difornitura degli acciai speciali.EN 10204 : Prodotti metallici - Tipi di documenti di controllo.EN 10269 : Steels and nickel alloys for fasteners withspecified elevated and/or temperature properties.EN 12164 : Rame e leghe di rame. Barre per torneria.EN 20898-2 (ISO 898-2) : VERRA' SOSTITUITA DA EN ISO898-2. Caratteristiche meccaniche degli elementi di col-legamento - Part 2: Dadi con carichi di prova determinati.Filettatura a passo grosso. EN 24032 : Dadi esagonali, tipo 1 - Categorie A e B (ISO4032).EN 24033 : Dadi esagonali, tipo 2 - Categorie A e B (ISO4033).EN 24035 : Dadi esagonali bassi (con smussi) - Categorie Ae B (ISO 4035).EN 28673 : Dadi esagonali, tipo 1, con filettatura metrica apasso fine - Categorie A e B (ISO 8673).EN 28674 : Dadi esagonali, tipo 2, con filettatura metrica apasso fine - Categorie A e B (ISO 8674).EN 28675 : Dadi esagonali bassi con filettatura metrica apasso fine - Categorie A e B (ISO 8675).ISO 228-1 : Pipe threads where pressure-tight joints are notmade on the threads - Part 1: Dimensions, tolerancesand designation.ISO 261 : ISO general purpose metric screw threads -General plan.ISO 263 : ISO inch screw threads - General plan andselection for screws, bolts and nuts - Diameter range0.06 to 6 in.ISO 426-2 : ANNULLATA Wrought copper-zinc alloys - Che-mical composition and forms of wrought products - Part2: Leaded copper-zinc alloys.ISO 898-2 (EN 20898-2 - EN ISO 898-2) : Mechanicalproperties of fasteners - Part 2: Nuts with specified proofload values - Coarse thread.DIN 979 : Hexagon thin slotted nuts and castle nuts withmetric coarse and fine pitch thread - Product grades Aand B.DIN 6924 : Prevailing torque type hexagon nuts withnonmetallic insert.DIN 6925 : Prevailing torque type all-metall hexagon nuts.DIN 7967 : Self Loching Counter Nuts.DIN 8140-1 : Wire thread inserts for ISO metric screwthreads. Part 1: Dimensions and technical deliveryconditions.DIN 17222 : Cold Rolled Steel Strips for Springs; TechnicalConditions of Delivery.EN ISO 898-2 : WILL REPLACE EN 20898-2. Mechanicalproperties of fasteners made of carbon steel and alloysteel - Part 2: Nuts with specified proof load values -Coarse thread.EN ISO 898-6 : Mechanical properties of fasteners made ofcarbon steel and alloy steel - Part 6: Nuts with specifiedproof load values - Fine pitch thread.EN ISO 1234 : Split pins.EN ISO 3506-2 : Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 2: Nuts.EN ISO 7040 : Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10.EN ISO 7042 : Prevailing torque type all-metal hexagonnuts, style 2 - Property classes 5, 8, 10 and 12.EN 10083-1+A1 : Quenched and tempered steels -Technical delivery conditions for special steels.EN 10204 : Metallic products - Types of inspection documents.EN 10269 : Steels and nickel alloys for fasteners withspecified elevated and/or temperature properties.EN 12164 : Copper and copper alloys. Rod for free machi-ning purposes.EN 20898-2 (ISO 898-2) : WILL BY REPLACED EN ISO898-2. Mechanical properties of fasteners - Part 2: Nutswith specified proof load values - Coarse thread.EN 24032 : Dadi esagonali, tipo 1 - Categorie A e B (ISO4032).EN 24033 : Hexagon nuts, style 2 - Product grades A and B(ISO 4033).EN 24035 : Hexagon thin nuts (chamfered) - Product gradesA and B (ISO 4035).EN 28673 : Hexagon nuts with metric fine pitch thread -Product grades A and B (ISO 8673).EN 28674 : Hexagon nuts with metric fine pitch thread -Product grades A and B (ISO 8674).EN 28675 : Hexagon thin nuts with metric fine pitch thread -Product grades A and B (ISO 8675).ISO 228-1 : Pipe threads where pressure-tight joints are notmade on the threads - Part 1: Dimensions, tolerancesand designation.ISO 261 : ISO general purpose metric screw threads -General plan.ISO 263 : ISO inch screw threads - General plan andselection for screws, bolts and nuts - Diameter range0.06 to 6 in.ISO 426-2 : DELEDED Wrought copper-zinc alloys - Che-mical composition and forms of wrought products - Part2: Leaded copper-zinc alloys.ISO 898-2 (EN 20898-2 - EN ISO 898-2) : Mechanicalproperties of fasteners - Part 2: Nuts with specified proofload values - Coarse thread. STANDARD N°REV. 05PAGINAPAGEDIOFSOSTITUISCEREPLACES3.100.601 - 3.150.6003.150.601Dadi - Tutti i Tipi -Nuts - All Types -5 253.100.600ISO 898-6 (EN ISO 898-6) : Caratteristiche meccanichedegli elementi di collegamento in acciaio al carbonio eacciaio legato - Part 6: Dadi con carichi di prova determi-nati. Filettatura a passo fine.ISO 965-1 : ISO general purpose metric screw threads -Tolerances - Part 1: Principles and basic data.ISO 965-2 : ISO general purpose metric screw threads -Tolerances - Part 2: Limits of sizes for general purposebolt and nut threads - Medium quality.ISO 965-3 : ISO general purpose metric screw threads -Tolerances - Part 3: Deviations for constructionalthreads.ISO 2320 : Prevaling torque type steel hexagon nuts -Mechanical and performance properties.ISO 3506-2 : Mechanical properties of corrosion-resistantstainless-steel fasteners - Part 2: Nuts.ISO 4032 : Hexagon nuts, style 1 - Product grades A and B.ISO 4033 : Hexagon nuts, style 2 - Product grades A and B.ISO 4035 : Hexagon thin nuts (chamfered) - Product gradesA and B.ISO 4042 : Threaded components - Electroplated coatings.ISO 4759-1 : Tolerances for fasteners - Part 1: Bolts, screwsand nuts with thread diameters between 1,6 (inclusive)and 150 mm (inclusive) and product grades A, B and C.ISO 5864 : ISO inch screw threads - Allowances andtolerances.ISO 7040 : Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5,8 and 10.ISO 7042 : Prevailing torque type all-metal hexagon nuts,style 2 - Property classes 5, 8, 10 and 12.ISO 8673 : Hexagon nuts, style 1, with metric fine pitchthread - Product grades A and B.ISO 8674 : Hexagon nuts, style 2, with metric fine pitchthread - Product grades A and B.ISO 8675 : Hexagon thin nuts with metric fine pitch thread -Product grades A and B.ISO 8839 : Mechanical properties of fasteners - Bolts,screws, studs and nuts made of non-ferrous metals.ISO 8992 : Fasteners - General requirements for bolts,screws, studs and nuts.ISO 9717 : Phosphate conversion coatings for metals -Method of specifying requirements.UNI 3740-6 : Bulloneria di acciaio. Prescrizioni tecniche.Rivestimenti protettivi.UNI 5587 : SOSTITUITA DA EN 24033 & EN 28674. Dadiesagonali alti. Filettatura metrica ISO a passo grosso e apasso fine. Categoria A.UNI 5588 : SOSTITUITA DA EN 24032 & EN 28673. Dadiesagonali normali. Filettatura metrica ISO a passogrosso e a passo fine. Categoria A.UNI 5589 : SOSTITUITA DA EN 24035 & EN 28675. Dadiesagonali bassi. Filettatura metrica ISO a passo grossoe a passo fine. Categoria A.UNI 5593 : Dadi esagonali normali ad intagli. Filettaturametrica ISO a passo grosso e fine. Categoria A.UNI 5594 : Dadi esagonali bassi ad intagli. Filettaturametrica ISO a passo grosso e fine. Categoria A.UNI 7473 : Dadi esagonali normali autofrenanti con anello dipoliammide. Filettatura metrica ISO a passo grosso e apasso fine. Categoria A.6 - RESPONSABILITA'NON APPLICABILEISO 898-6 (EN ISO 898-6) : Mechanical properties offasteners made of carbon steel and alloy steel - Part 6:Nuts with specified proof load values - Fine pitch thread.ISO 965-1 : ISO general purpose metric screw threads -Tolerances - Part 1: Principles and basic data.ISO 965-2 : ISO general purpose metric screw threads -Tolerances - Part 2: Limits of sizes for general purposebolt and nut threads - Medium quality.ISO 965-3 : ISO general purpose metric screw threads -Tolerances - Part 3: Deviations for constructionalthreads.ISO 2320 : Prevaling torque type steel hexagon nuts -Mechanical and performance properties.ISO 3506-2 : Mechanical properties of corrosion-resistantstainless-steel fasteners - Part 2: Nuts.ISO 4032 : Hexagon nuts, style 1 - Product grades A and B.ISO 4033 : Hexagon nuts, style 2 - Product grades A and B.ISO 4035 : Hexagon thin nuts (chamfered) - Product gradesA and B.ISO 4042 : Threaded components - Electroplated coatings.ISO 4759-1 : Tolerances for fasteners - Part 1: Bolts, screwsand nuts with thread diameters between 1,6 (inclusive)and 150 mm (inclusive) and product grades A, B and C.ISO 5864 : ISO inch screw threads - Allowances andtolerances.ISO 7040 : Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5,8 and 10.ISO 7042 : Prevailing torque type all-metal hexagon nuts,style 2 - Property classes 5, 8, 10 and 12.ISO 8673 : Hexagon nuts, style 1, with metric fine pitchthread - Product grades A and B.ISO 8674 : Hexagon nuts, style 2, with metric fine pitchthread - Product grades A and B.ISO 8675 : Hexagon thin nuts with metric fine pitch thread -Product grades A and B.ISO 8839 : Mechanical properties of fasteners - Bolts,screws, studs and nuts made of non-ferrous metals.ISO 8992 : Fasteners - General requirements for bolts,screws, studs and nuts.ISO 9717 : Phosphate conversion coatings for metals -Method of specifying requirements.UNI 3740-6 : Steel fasteners. Technical specifications.Protective coatings.UNI 5587 : REPLACED BY EN 24033 & EN 28674. Thickhexagon nuts. ISO metric coarse and fine thread. FinishA.UNI 5588 : REPLACED BY EN 24032 & EN 28673.Hexagon nuts. ISO metric coarse and fine thread. FinishA.UNI 5589 : REPLACED BY EN 24035 & EN 28675. Lockhexagon nuts. ISO metric coarse and fine thread. FinishA.UNI 5593 : Slotted and castle hexagon nuts - ISO metriccoarse and fine thread - Product grade A.UNI 5594 : Slotted and castle low hexagon nuts - ISO metriccoarse and fine thread - Product grade A.UNI 7473 : Prevailing torque-type hexagon nuts withpolyamide ring. ISO metric coarse and fine thread.Product grade A.6 - RESPONSIBILITYNOT APPLICABLE STANDARD N°REV. 05PAGINAPAGEDIOFSOSTITUISCEREPLACES3.100.601 - 3.150.6003.150.601Dadi - Tutti i Tipi -Nuts - All Types -6 253.100.6007 - NORMA Negli allegati seguenti, divisi per tipologia e dimensioni,sono elencati i materiali oggetto della presente Norma.7.1 - INDICAZIONI GENERALI.Nella presente Norma vengono trattate le Viti normal-mente utilizzati nella progettazione e fabbricazione dimacchinari DANIELI.Per gli approvvigionamenti utilizzare, per le partiapplicabili, la Norma 2.8.020.7.2 - NOTE.(1): Masse bulloneria: moltiplicareper-Acciaio al carbonio (7,85 kg/dm3) = 1,00-Acciaio inox (8,00 kg/dm3) = 1,02-Ottone (8,65 kg/dm3) = 1,10(2): Dadi zincati solo per esecuzione di impiantistica.(3): In accodo EN ISO 3506-2; X5CrNi18-10 o AISI 304 oequivalenti.(4): EN12164 - CuZn39Pb2-R410 (Ex-ISO 426-2 - CuZn39Pb3) oequivalenti.(5): Con dimensioni testa esagonale in accordo standardFabbricante.(6): Come Nota (5).(7): Come Nota (5).(8): Come Nota (5).(9): Come Nota (5).(10): Come Nota (5).(11): Non previsti nelle Norme EN 24033 o EN 28674.(12): Non previsti nelle Norme EN ISO 7042.(13): Non previsti su DIN 979, previsti su UNI 5594.(14): Non previsti ne su DIN 979 ne su UNI 5594. (15): Le dimensioni dei dadi in pollici secondo ASME B 1.1 so-no date solo a titolo di corrispondenza indicativa conquelle metriche.(16): Non previste nella Norma ASME B18.2.4.1M.(17): Non previste nella Norma EN 28673.(18): Non previsti nella Norma DIN 8140-1.7 - STANDARDThe following annexes list the materials treated in thisSTD, divided according to type and dimensions.7.1 - GENERAL INDICATIONS.This Standard deals with the screws which arenormally used in the design and manufacture of theDANIELI equipment.For procurements refer to the Standard 2.8.020, inits applicable parts.7.2 - NOTES.(1): Bolting masses: multiplyby-Carbon steel (7,85 kg/dm3) = 1,00-Stainless steel (8,00 kg/dm3) = 1,02-Brass (8,65 kg/dm3) = 1,10(2): Use galvanized nuts only for systems.(3): Accor. to EN ISO 3506-2; X5CrNi18-10 o AISI 304 orequivalents.(4): EN12164 - CuZn39Pb2-R410 (Ex-ISO 426-2 - CuZn39Pb3)or equivalents.(5): The head hexagon dimensions in accordance to theManufacturer standard.(6): As Note (5).(7): As Note (5).(8): As Note (5).(9): As Note (5).(10): As Note (5).(11): Not foreseen by STDs EN 24033 or EN 28674.(12): Not foreseen by STDs EN ISO 7042.(13): Not included in the DIN 979 STD. Included in theUNI 5594 STD.(14): Not included in the DIN 979 nor in the UNI 5594 STD.(15): Nut inch dimensions' according to ASME B 1.1 aregiven for indicative relation to metric one's only.(16): Not foreseen by ASME B18.2.4.1M.(17): Not foreseen by EN 28673.(18): Not foreesen by STD DIN 8140-1. STANDARD N°REV. 05PAGINAPAGEDIOFSOSTITUISCEREPLACES3.100.601 - 3.150.6003.150.601ALL. 01-P.01 di 03 - Dadi Esagonali EN 24032 - EN 28673 Tipo 1 (STD). ANN. 01-P.01 of 03 - Hexagon Nuts EN 24032 -EN 28673 Style 1 (STD).7 253.100.600A01-Dadi Esagonali EN 24032-EN 28673 Tipo 1 (STD).A01.1- Destri.A01-Hexagon Nuts EN 24032-EN 28673 Style 1 (STD).A01.1- Right.-Fabbricaz. secondo: - EN 24032 (ISO 4032) ≤ M33.Passo fine - EN 28673 (ISO 8673) ≥ M33x2.-Prescrizioni generali: ISO 8992.-Filettatura: ISO 261-ISO 965 Parti 1-2-3. Tolleranza 6H.-Materiali: Vedere tabella (per dadi in acciaio al carbonio conpasso fine applicare EN ISO 898-6).-Categorie ISO 4759-1: d ≤ M16 (M16x1,5) - "A".d > M16 (M16x1,5) - "B".-Finitura: Vedere tabella.-Dadi adatti per filettature esterne "Destre":-ISO 261-ISO 965 Parti 1-2-3. Tolleranza 6g.-Categ. ISO 4759-1: d ≤ M24; l ≤ 10d o 150 mm - "A".d > M24; l > 10d o 150 mm - "B".-Manufact. according to: - EN 24032 (ISO 4032) ≤ M33.Fine pitch - EN 28673 (ISO 8673) ≥ M33x2.-General prescriptions: ISO 8992.-Thread: ISO 261-ISO 965 Parts 1-2-3. Tolerance 6H.-Materials: See table (for carbon steel fine pitch nuts use ENISO 898-6).-Grades ISO 4759-1: d ≤ M16 (M16x1,5) - "A".d > M16 (M16x1,5) - "B".-Finishing: See table.-Nuts suitable for external threads "Right":-ISO 261-ISO 965 Parts 1-2-3. Tolerance 6g.-Grades ISO 4759-1: d ≤ M24; l ≤ 10d o 150 mm - "A".d > M24; l > 10d o 150 mm - "B".Es. des.: 0.001075.C - Dado esag. STDEN 24032 (o EN 28673) - M10Cl. 8Fosfatato neroo (Zincato Fe/Zn5 ISO 4042) o (Naturale)Ex. des.: 0.001075.C - Hex. nut STDEN 24032 (or EN 28673) - M10Cl. 8 Black phosphatizedor (Coated Fe/Zn5 ISO 4042) or (Plain)CODICE /CODEdP PassoPitchsmaxnomemin min maxMassaMasskg (1)M4 0,7 7 7,66 2,9 3,2 0,001 0.001071.F - 0.057113.W - - 0.070057.K 0.351512.GM5 0,8 8 8,79 4,4 4,7 0,001 0.001072.G - 0.057114.X - - 0.050495.B 0.084570.GM6 1 10 11,05 4,9 5,2 0,002 0.001073.A - 0.057115.Z - - 0.050496.C 0.050502.HM8 1,25 13 14,38 6,44 6,8 0,005 0.001074.B 0.079325.Q 0.057116.S - - 0.050497.D 0.072365.HM10 1,5 16 17,77 8,04 8,4 0,010 - - - - - - -(5) 17 18,9 7,64 8 0,011 0.001075.C 0.079326.H - 0.057117.T - 0.056069.L 0.057460.NM12 1,75 18 20,03 10,37 10,8 0,016 - - - - - - -(5) 19 21,1 9,64 10 0,017 0.001076.D 0.065988.C - 0.057118.B - 0.050498.M 0.050503.KM14 2 21 23,35 12,1 12,8 0,025 0.050468.W 0.079329.R - 0.057119.C - 0.083197.N -M16 2 24 26,75 14,1 14,8 0,033 0.001077.E 0.079330.S - 0.055512.R - 0.050499.N 0.056399.LM18 2,5 27 29,56 15,1 15,8 0,049 0.050469.X 0.067179.K - 0.088454.B - 0.083194.K -M20 2,5 30 32,95 16,9 18 0,063 0.001078.N 0.058594.A - 0.062221.E - 0.050500.R 0.074027.VM22 (5) 2,5 32 35,03 16,9 18 0,077 0.050470.V - - 0.088455.C - 0.088464.D -34 37,29 18,1 19,4 0,085 - - - - - - -M24 3 36 39,55 20,2 21,5 0,108 0.001079.P 0.064350.W - 0.067669.V - 0.050501.Q 0.060135.CM27 3 41 45,2 22,5 23,8 0,163 0.050471.H 0.067084.X - 0.088456.D 0.088465.E - -M30 3,5 46 50,85 24,3 25,6 0,227 0.001080.D 0.061927.T - 0.088457.E 0.081038.W - 0.050504.LM33 3,5 50 55,37 27,4 28,7 0,285 0.050472.K - - 0.088458.N 0.088466.F - -M33x2 2 50 55,37 27,4 28,7 0,275 0.306935.E 0.150964.H - 0.306936.F 0.306937.G - -M36x3 3 55 60,79 29,4 31 0,381 0.001081.S 0.059471.N - 0.088459.P 0.088467.G - 0.050505.MM39x3 3 60 66,44 31,8 33,4 0,502 0.077459.M - - 0.321284.E 0.318049.S - -M42x3 3 65 71,3 32,4 34 0,628 0.001082.T 0.068168.X - 0.102127.X 0.102128.F - 0.351513.AM45x3 3 70 76,95 34,4 36 0,8 0.009564.K - - 0.321285.F 0.318050.X - -M48x3 3 75 82,6 36,4 38 0,938 0.001083.R 0.079816.D - 0.088461.A 0.088469.H - 0.351514.BM56x4 4 85 93,56 43,4 45 1,39 0.001084.V 0.194523.Q - 0.088462.B 0.088470.P - 0.351515.CM64x4 4 95 104,8 49,1 51 1,91 0.001085.W 0.108272.V - 0.088463.C 0.088471.C - 0.185643.ESconsigliatoNot recommendedFig. A01.1/1Fosfatati neriBlack phosphatizedISO 9717 - UNI 3740-6Zincati/Zinc coatedCl. 8 - EN ISO 898-2Cl. 8 EN ISO 898-2Cl. 10 EN ISO 898-2Fe/Zn 5 ISO 4042Fe/Zn 8 ISO 4042Naturale / PlainCl. A2-50EN ISO 3506-2Inox(3)Cl. A2-70EN ISO 3506-2Inox(3)Cl. CU3ISO 8839Ottone-Brass(4)Tab. A01.1/1(2)Ex UNI 5588 - DIN 934m STANDARD N°REV. 05PAGINAPAGEDIOFSOSTITUISCEREPLACES3.100.601 - 3.150.6003.150.601ALL. 01-P.02 di 03 - Dadi Esagonali EN 24032 - EN 28673 Tipo 1 (STD). ANN. 01-P.02 of 03 - Hexagon Nuts EN 24032 -EN 28673 Style 1 (STD).8 253.100.600A01.2- Sinistri. A01.2- Left.-Fabbricaz. secondo: - EN 24032 (ISO 4032) ≤ M33.Passo fine - EN 28673 (ISO 8673) ≥ M33x2.-Prescrizioni generali: ISO 8992.-Filettatura: ISO 261-ISO 965 Parti 1-2-3. Tolleranza 6H.-Materiali: Vedere tabella (per dadi in acciaio al carbonio conpasso fine applicare EN ISO 898-6).-Categorie ISO 4759-1: d ≤ M16 (M16x1,5) - "A".d > M16 (M16x1,5) - "B".-Finitura: Vedere tabella.-Dadi adatti per filettature esterne "Sinistre":-ISO 261-ISO 965 Parti 1-2-3. Tolleranza 6g.-Categ. ISO 4759-1: d ≤ M24; l ≤ 10d o 150 mm - "A".d > M24; l > 10d o 150 mm - "B".-Manufact. according to: - EN 24032 (ISO 4032) ≤ M33.Fine pitch - EN 28673 (ISO 8673) ≥ M33x2.-General prescriptions: ISO 8992.-Thread: ISO 261-ISO 965 Parts 1-2-3. Tolerance 6H.-Materials: See table (for carbon steel fine pitch nuts use ENISO 898-6).-Grades ISO 4759-1: d ≤ M16 (M16x1,5) - "A".d > M16 (M16x1,5) - "B".-Finishing: See table.-Nuts suitable for external threads "Left":-ISO 261-ISO 965 Parts 1-2-3. Tolerance 6g.-Grades ISO 4759-1: d ≤ M24; l ≤ 10d o 150 mm - "A".d > M24; l > 10d o 150 mm - "B".Es. des.: 0.001075.C - Dado esag. STD SinistroEN 24032 (o EN 28673) - M10Cl. 8Fosfatato nero (o Naturale)Ex. des.: 0.001075.C - Hex. nut STD Left EN 24032 (or EN 28673) - M10Cl. 8 Black phosphatized (or Plain)Fig. A01.2/1CODICE /CODEdPPassoPitchsmaxnomemin min maxMassaMasskg (1)M4 0,7 7 7,66 2,9 3,2 0,001 0.088585.X - - 0.088545.EM5 0,8 8 8,79 4,4 4,7 0,001 0.088586.Z - - 0.088546.FM6 1 10 11,05 4,9 5,2 0,002 0.088587.S - - 0.088547.GM8 1,25 13 14,38 6,44 6,8 0,005 0.088588.A 0.351516.D - 0.088548.QM10 1,5 16 17,77 8,04 8,4 0,010 - - - -(5) 17 18,9 7,64 8 0,011 0.088589.B 0.351517.E - 0.088549.HM12 1,75 18 20,03 10,37 10,8 0,016 - - - -(5) 19 21,1 9,64 10 0,017 0.088590.G 0.351518.N - 0.088550.PM14 2 21 23,35 12,1 12,8 0,025 0.088591.V 0.351519.P - 0.088551.CM16 2 24 26,75 14,1 14,8 0,033 0.075040.N 0.351520.M - 0.088552.DM18 2,5 27 29,56 15,1 15,8 0,049 0.088592.W 0.351521.A - 0.088553.EM20 2,5 30 32,95 16,9 18 0,063 0.050493.G 0.094233.R - 0.088554.FM22 (5) 2,5 32 35,03 16,9 18 0,077 0.088593.X - - 0.088555.G34 37,29 18,1 19,4 0,085 - - - -M24 3 36 39,55 20,2 21,5 0,108 0.088594.Z 0.351522.B - 0.088556.AM27 3 41 45,2 22,5 23,8 0,163 0.088595.S 0.351523.C 0.088557.B -M30 3,5 46 50,85 24,3 25,6 0,227 0.059907.M 0.351524.D 0.088558.K -M33 3,5 50 55,37 27,4 28,7 0,285 0.088596.T - 0.088559.L -M33x2 2 50 55,37 27,4 28,7 0,275 0.306939.H 0.351525.E 0.306940.W -M36x3 3 55 60,79 29,4 31 0,381 0.061401.B 0.351526.F 0.088560.H -M42x3 3 65 71,3 32,4 34 0,628 0.056513.W 0.351527.G 0.102133.V -M48x3 3 75 82,6 36,4 38 0,938 0.070500.Z 0.079815.C 0.088562.F -M56x4 4 85 93,56 43,4 45 1,39 0.062443.D 0.351528.Q 0.088563.G -M64x4 4 95 104,8 49,1 51 1,91 0.050494.A 0.351529.H 0.088564.A -SconsigliatoNot recommendedCl. 8 EN ISO 898-2Cl. 10 EN ISO 898-2Naturale / PlainCl. A2-50EN ISO 3506-2Inox(3)Cl. A2-70EN ISO 3506-2Inox(3)Tab. A01.2/1Fosfatati neriBlack phosphatizedISO 9717 - UNI 3740-6Ex UNI 5588 - DIN 934m STANDARD N°REV. 05PAGINAPAGEDIOFSOSTITUISCEREPLACES3.100.601 - 3.150.6003.150.601ALL. 01-P.03 di 03 - Dadi Esagonali EN 24032 - EN 28673 Tipo 1 (STD). ANN. 01-P.03 of 03 - Hexagon Nuts EN 24032 -EN 28673 Style 1 (STD).9 253.100.600A01.3- Destri - Resilienza -40°C. A01.3- Right - Impact test -40°C.-Fabbricaz. secondo: EN 24032 (ISO 4032).-Prescrizioni generali: ISO 8992.-Filettatura: ISO 261-ISO 965 Parti 1-2-3. Tolleranza 6H.-Materiali: Vedere tabella (per dadi in acciaio al carbonio conpasso fine applicare EN ISO 898-6).-Resilienza: A bassa temperatura -40°C (> 30J).-Categorie ISO 4759-1: d ≤ M16 (M16x1,5) - "A".d > M16 (M16x1,5) - "B".-Finitura: Vedere tabella.-Dadi adatti per filettature esterne "Destre":-ISO 261-ISO 965 Parti 1-2-3. Tolleranza 6g.-Categ. ISO 4759-1: d ≤ M24; l ≤ 10d o 150 mm - "A".d > M24; l > 10d o 150 mm - "B".-Manufact. according to: EN 24032 (ISO 4032).-General prescriptions: ISO 8992.-Thread: ISO 261-ISO 965 Parts 1-2-3. Tolerance 6H.-Materials: See table (for carbon steel fine pitch nuts use ENISO 898-6).-Impact test: At low temperature -40°C (> 30J).-Grades ISO 4759-1: d ≤ M16 (M16x1,5) - "A".d > M16 (M16x1,5) - "B".-Finishing: See table.-Nuts suitable for external threads "Right":-ISO 261-ISO 965 Parts 1-2-3. Tolerance 6g.-Grades ISO 4759-1: d ≤ M24; l ≤ 10d o 150 mm - "A".d > M24; l > 10d o 150 mm - "B".Es. des.: 0.197952.S - Dado esag. STDEN 24032 - M10Cl. 8 >30J a -40°C Fosfatato neroEx. des.: 0.197952.S - Hex. nut STDEN 24032 - M10Cl. 8 >30J at -40°C Black phosphatized CODICE /CODEdPPassoPitchsmaxnomemin min maxMassaMasskgM8 1,25 13 14,38 6,44 6,8 0,005 0.197950.CM10 1,5 16 17,77 8,04 8,4 0,010 -(5) 17 18,9 7,64 8 0,011 0.197952.SM12 1,75 18 20,03 10,37 10,8 0,016 -(5) 19 21,1 9,64 10 0,017 0.197957.XM16 2 24 26,75 14,1 14,8 0,033 0.187335.VM20 2,5 30 32,95 16,9 18 0,063 0.187332.SM24 3 36 39,55 20,2 21,5 0,108 0.184689.CM30 3,5 46 50,85 24,3 25,6 0,227 0.187330.CSconsigliatoNot recommendedFig. A01.3/1Fosfatati neriBlack phosphatizedISO 9717 - UNI 3740-6Cl. 8 EN ISO 898-2KV > 30J -40°CTab. A01.3/1Ex UNI 5588 - DIN 934m STANDARD N°REV. 05PAGINAPAGEDIOFSOSTITUISCEREPLACES3.100.601 - 3.150.6003.150.601ALL. 02-P.01 di 01 - Dadi Esagonali EN 24033 -EN 28674 Tipo 2 (Alti). ANN. 02-P.01 of 01 - Hexagon Nuts EN 24033 -EN 28674 Style 2 (Thick).10 253.100.600A02- Dadi Esagonali EN 24033 - EN 28674 Tipo 2(Alti).A02- Hexagon Nuts EN 24033 - EN 28674 Style 2(Thick).-Fabbricaz. secondo: - EN 24033 (ISO 4033) ≤ M30.Passo fine - EN 28674 (ISO 8674) ≥ M36x3.-Prescrizioni generali: ISO 8992.-Filettatura: ISO 261-ISO 965 Parti 1-2-3. Tolleranza 6H.-Materiali: Vedere tabella (per dadi in acciaio al carbonio conpasso fine applicare EN ISO 898-6).-Categorie ISO 4759-1: d ≤ M16 (M16x1,5) - "A".d > M16 (M16x1,5) - "B".-Finitura: Vedere tabella.-Dadi adatti per filettature esterne "Destre o Sinistre":-ISO 261-ISO 965 Parti 1-2-3. Tolleranza 6g.-Categ. ISO 4759-1: d ≤ M24; l ≤ 10d o 150 mm - "A".d > M24; l > 10d o 150 mm - "B".-Manufact. according to: - EN 24033 (ISO 4033) ≤ M30.Fine pitch - EN 28674 (ISO 8674) ≥ M36x3.-General prescriptions: ISO 8992.-Thread: ISO 261-ISO 965 Parts 1-2-3. Tolerance 6H.-Materials: See table (for carbon steel fine pitch nuts use ENISO 898-6).-Grades ISO 4759-1: d ≤ M16 (M16x1,5) - "A".d > M16 (M16x1,5) - "B".-Finishing: See table.-Nuts suitable for external threads "Right or Left":-ISO 261-ISO 965 Parts 1-2-3. Tolerance 6g.-Grades ISO 4759-1: d ≤ M24; l ≤ 10d o 150 mm - "A".d > M24; l > 10d o 150 mm - "B".Es. des.: 0.001045.D - Dado esag. AltoEN 24033 (o EN 28674) - M10Cl. 9Fosfatato nero (o Naturale)Ex. des.: 0.001045.D - Hex. nut ThickEN 24033 (or EN 28674) - M10 Cl. 9 Black phosphatized (or Plain)Fig. A02/1CODICE /CODE CODICE /CODEFilett. Destra /Right thread Filett. Sinistra /Left thread dPPassoPitchsmaxnomemin min maxMassaMasskg (1)M6 1 10 11,05 5,4 5,7 0,003 - 0.001043.B 0.351531.C - 0.322640.XM8 1,25 13 14,38 7,14 7,5 0,006 - 0.001044.C 0.351532.D - 0.322641.LM10 1,5 16 17,77 8,94 9,3 0,013 - - - - -(6) 17 18,9 h14 10 0,014 - 0.001045.D 0.351533.E - 0.322642.MM12 1,75 18 20,03 11,57 12 0,019 - - - - -(6) 19 21,1 h14 12 0,02 - 0.001046.E 0.351534.F - 0.322643.NM16 2 24 26,75 15,7 16,4 0,04 - 0.001047.F 0.056020.F - 0.322644.PM20 2,5 30 32,95 19 20,3 0,079 0.001048.P - 0.351535.G 0.322645.Q -M24 3 36 39,55 22,6 23,9 0,137 0.001049.Q - 0.050463.H 0.322646.H -M27 (11) 3 41 45,2 h14 27 0,2 0.050449.T - - 0.322647.K -M30 3,5 46 50,85 27,3 28,6 0,284 0.001050.N - 0.050464.K 0.322648.T -M33 (11) 3,5 50 55,37 h14 33 0,361 0.351530.P - - 0.351539.L -M36x3 3 55 60,79 33,1 34,7 0,474 0.001051.B - 0.050466.M 0.322649.R -M42x3 (11) 3 65 71,3 h14 42 0,776 0.001052.C - 0.050467.N 0.322650.S -M48x3 (11) 3 75 82,6 h14 48 1,18 0.001053.D - 0.351536.A 0.322651.N -M56x4 (11) 4 85 93,56 h14 56 1,73 0.001054.E - 0.351537.B 0.322652.P -M64x4 (11) 4 95 104,8 h14 64 2,39 0.001055.F - 0.351538.K 0.322653.Q -SconsigliatoNot recommendedCl. 8 EN ISO 898-2Cl. 9 EN ISO 898-2NaturalePlainCl. CU3ISO 8839Ottone-Brass(4)Tab. A02/1Fosfatati neriBlack phosphatizedISO 9717 - UNI 3740-6Ex UNI 5587Es. des.: 0.322642.M - Dado esag. Alto SinistroEN 24033 (o EN 28674) - M10Cl. 9Fosfatato nero (o Naturale)Ex. des.: 0.322642.M - Hex. nut Thick Left EN 24033 (or EN 28674) - M10Cl. 9 Black phosphatized (or Plain)Cl. 8 EN ISO 898-2Cl. 9 EN ISO 898-2Fosfatati neriBlack phosphatizedISO 9717 - UNI 3740-6m [...]... A81-Wire thread inserts (HeliCoil) DIN 814 0-1 Forma - B - Screw-Lock Form - B - Screw-Lock d Forma - A - STD Form - A - STD d1 Fig A81/1 STANDARD N° Trascinatore Tag Tacca Notch Es des.: 0.062610.Q - Filetto riportato STD ( o Sc.Lock) DIN 814 0-1 -A (o B) - M16x1,5d EN ISO350 6-2 -A2-HV42 5-5 50 Naturale -Fabbricaz secondo: - DIN 814 0-1 -Prescrizioni generali: DIN 814 0-1 -Filettatura (finale): ISO 261-ISO... prescrizioni DIN 814 0-1 Tacca Notch Trascinatore Tag Ex des.: 0.062610.Q - Wire thread insert STD ( or Sc.Lock) DIN 814 0-1 -A (or B) - M16x1,5d EN ISO350 6-2 -A2-HV42 5-5 50 Plain -Manufact according to: - DIN 814 0-1 -General prescriptions: DIN 814 0-1 -Thread (final): ISO 261-ISO 965 Parts 1-2 -3 Tolerance 6H -Materials: See table -Grades (final) ISO 475 9-1 : d ≤ M16 (M16x1,5) - "A" d > M16 (M16x1,5) - "B" -Finishing:... 89 8-6 ) ISO 89 8-6 ) -Categorie ISO 475 9-1 : d ≤ M16 (M16x1,5) - "A" -Grades ISO 475 9-1 : d ≤ M16 (M16x1,5) - "A" d > M16 (M16x1,5) - "B" d > M16 (M16x1,5) - "B" -Finitura: Vedere tabella -Finishing: See table -Dadi adatti per filettature esterne "Destre o Sinistre": -Nuts suitable for external threads "Right or Left": -ISO 261-ISO 965 Parti 1-2 -3 Tolleranza 6g -ISO 261-ISO 965 Parts 1-2 -3 Tolerance 6g -Categ... (EN 10204 - 2.2) Fig A61.1/1 Es des.: 0.078100.T - Dado esagonale - 13UNC ASMEB18.2.2 - 1/2" 2B-ASTM A194 - 2H Fosfatato nero Ex des.: 0.078100.T- Hex Nut - 13UNC ASMEB18.2.2 - 1/2" 2B-ASTM A194 - 2H Black phosphatized Es des.: 0.351677.W - Dado esag Sx - 13UNC ASMEB18.2.2 - 1/2" 2B-ASTM A194 - 2H Fosfatato nero Ex des.: 0.351677.W - Hex Nut Left - 13 UNC ASMEB18.2.2 - 1/2" 2B-ASTM A194 - 2H Black... 10204 - 2.2) Fig A61.2/1 Es des.: 0.351691.L - Dado esag Basso - 13UNC ASMEB18.2.2 - 1/2" 2B-ASTM A563 - Gr.A Fosfatato nero Ex des.: 0.351691.L - Hex Jam Nut - 13UNC ASMEB18.2.2 - 1/2" 2B-ASTM A563 - Gr.A Black phosphatized Es des.: 0.351698.T - Dado esag Basso Sx-13UNC ASMEB18.2.2 - 1/2" 2B-ASTM A563 - Gr.A Fosfatato nero Ex des.: 0.351698.T - Hex Jam Nut Left - 13UNC ASMEB18.2.2 - 1/2" 2B-ASTM A563 -. .. See table -Required Marking: Property class -Wire thread inserts suitable for external threads "Right": -ISO 261-ISO 965 Parts 1-2 -3 Tolerance 6g -Grades ISO 475 9-1 : d ≤ M24; l ≤ 10d o 150 mm - "A" d > M24; l > 10d o 150 mm - "B" -Use according to DIN 814 0-1 prescriptions ALL 81-P.02 di 02 - 80-Applicazioni particolari - Dadi - Filetti riportati (HeliCoil) DIN 814 0-1 ANN 81-P.02 of 02 - 80-Specific... 0.351769.A - ALL 81-P.01 di 02 - 80-Applicazioni particolari - Dadi - Filetti riportati (HeliCoil) DIN 814 0-1 ANN 81-P.01 of 02 - 80-Specific applications - Nuts - Wire thread inserts (HeliCoil) DIN 814 0-1 80-Applicazioni particolari - Dadi A81-Filetti riportati (HeliCoil) DIN 814 0-1 l1 REV 05 SOSTITUISCE REPLACES PAGINA PAGE 3.100.600 24 DI OF 25 3.100.601 - 3.150.600 3.150.601 80-Specific applications - Nuts... 93 5-1 - (UNI 5593) Fig A06.1/1a ≤ M10 REV 05 SOSTITUISCE REPLACES PAGINA PAGE 3.100.600 15 Ex des.: 0.001135.V - Hex castle nut STD DIN 93 5-1 - M20 Cl 8 Black phosphatized -Manufact according to: - DIN 93 5-1 - (UNI 5593) -General prescriptions: ISO 8992 (DIN 1 3-1 2; DIN 1 3-1 5) -Thread: ISO 261-ISO 965 Parts 1-2 -3 Tolerance 6H -Materials: See table (for carbon steel fine pitch nuts use EN ISO 89 8-6 ) -Grades... 1-2 -3 Tolleranza 6H -Materiali: Vedere tabella (per dadi in acciaio al carbonio con passo fine applicare EN ISO 89 8-6 ) -Categorie ISO 475 9-1 : d ≤ M16 (M16x1,5) - "A" d > M16 (M16x1,5) - "B" -Finitura: Vedere tabella -Dadi adatti per filettature esterne "Destre": -ISO 261-ISO 965 Parti 1-2 -3 Tolleranza 6g -Categ ISO 475 9-1 : d ≤ M24; l ≤ 10d o 150 mm - "A" d > M24; l > 10d o 150 mm - "B" P DI OF A06-Hexagon... secondo: - DIN 979 - (UNI 5594) -Prescrizioni generali: ISO 8992 (DIN 1 3-1 2; DIN 1 3-1 5) -Filettatura: ISO 261-ISO 965 Parti 1-2 -3 Tolleranza 6H -Materiali: Vedere tabella (per dadi in acciaio al carbonio con passo fine applicare EN ISO 89 8-6 ) -Categorie ISO 475 9-1 : d ≤ M16 (M16x1,5) - "A" d > M16 (M16x1,5) - "B" -Finitura: Vedere tabella -Dadi adatti per filettature esterne "Destre": -ISO 261-ISO 965 . Nuts (Metric).DIN 1 3-1 /-2 /-3 /-4 /-5 /-6 /-7 /-8 /-9 /-1 0 /-1 1 /-1 2 /-1 2 Suppl. /-1 3 /-1 4 /-1 5 /-1 9 /-2 0 /-2 1 /-2 2 /-2 3 /-2 4 /-2 5 /-2 6 /-2 7 /-2 8 /-5 0 /-5 1 /-5 2 : ISO metric screw. Nuts (Metric).DIN 1 3-1 /-2 /-3 /-4 /-5 /-6 /-7 /-8 /-9 /-1 0 /-1 1 /-1 2 /-1 2 Suppl. /-1 3 /-1 4 /-1 5 /-1 9 /-2 0 /-2 1 /-2 2 /-2 3 /-2 4 /-2 5 /-2 6 /-2 7 /-2 8 /-5 0 /-5 1 /-5 2 : ISO metric screw