Cisco routing process

7KH &,6&2 5RXWLQJ 3URFHVV route-map map-tag [permit | deny] [sequence-number] FOR POLICY ROUTING match ip address {access-list-number | name} [ access-list-number | name] match length max LQFOXGLQJ 32/,&< 5RXWLQJ 3ROLF\ 5RXWLQJ on incoming interface selected by: Input Access-list NAT DATA Packets set ip next-hop ip-address [ ip-address] set interface type number [ type number] Output Access-list NAT / PAT Accounting ip policy route-map map-tag DATA no match or deny or OUTGOING to same protocol set default interface type number [ type number] set ip default next-hop ip-address [ ip-address] distribute-list {access-list-number | name} out [interface-name] passive-interface type number Routing Table INCOMING from REMOTE offset-list {access-list-number | name} {in | out} ‚ss†r‡Ã[type number] distance rvtu‡ [address mask [access-list-number | name]] distribute-list {access-list-number | name} in [type number] passive-interface type number Route-TAGs S C x Static Connected dynamic routing Route-TAGs OUTGOING coming from other protocol vƒÃhppr††t…‚ˆƒÃ”hppr††yv†‡ˆ€ir…ÕÁh€r–Ãv ÃÃÃÃÃÃÃÃÃs‚…Æryrp‡rqł‡‚p‚y distribute-list {access-list-number | name} out [routing-process |autonomous-system-number] Incoming Route Processing ROUTE Information INCOMING from LOCAL ip route prefix mask {address | interface} [distance] [tag tag] [permanent] hqÃs…‚€Ãp‚rp‡rqÃv‡r…shpr† &RS\ULJKW  E\ $OH[DQGHU 0DUKROG $GPLQLVWUDWLYH 'LVWDQFH 20 90 100 110 115 120 170 200 255 Connected Static Route EIGRP Summary External BGP Internal EIGRP IGRP OSPF IS-IS RIP External EIGRP Internal BGP Outgoing Route Processing Routes 0HWULF OUTGOING to another protocol redistribute protocol [process-id] {level-1 | level-1-2 | level-2} [metric metric-value] [metric-type type-value] [match {internal | external | external 2}] [tag tag-value] [route-map map-tag] [weight weight] [subnets] qrshˆy‡vs‚…€h‡v‚Ã…rqv†‡…viˆ‡v‚) default-information originate [always] [metric metric-value] [metric-type typevalue] {level-1 | level-1-2 | level-2} [route-map map-name]SDQPTQA default-information {in | out} {access-list-number | name}DBSQ@DBSQ route-map map-tag [permit | deny] [sequence-number] FOR ROUTE REDISTRIBUTION match interface type number [ type number] match ip route-source {access-list-number | name}[ access-list-number | name] set automatic-tag set level {level-1 | level-2 | level-1-2 | stub-area | backbone} match metric metric-value set local-preference match route-type {local | internal | external [type-1 | type-2] | level-1 | level-2} set metric metric-value match tag tag-value [ tag-value] set metric-type {internal | external | type-1 | type-2} match ip address {access-list-number | name} [ access-list-number | name] set origin {igp | egp autonomous-system | incomplete} match ip next-hop {access-list-number | name}[ access-list-number | name] set tag tag-value set next-hop next-hop