MARIS installing IHO

Migrating to IHO Certificate for S-63 1.1 in Maris ECDIS This guide is based on the Maris 900 ECDIS Migrating to IHO certificate for S-63 1.1 Migrating from P R IMAR C R T to IHO.C R T To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS The IHO.CRT is located on any AVCS S-63 1.1 Media To install it please insert the S-63 1.1 Media into your ECDIS and follow the steps below: Access the “Chart handling” utility by clicking on the ”Chart handling” icon Select “SA certificate” from the chart handling menu The currently installed public key will be displayed at the top of the screen In this case the “PRIMAR.CRT” is installed Select “Install SA certificate” Browse to the location of the “IHO.CRT” certificate and select “Open” to load the certificate Select “OK” The IHO.CRT has now been installed and S-63 1.1 data can be loaded into the ECDIS Migrating to IHO certificate for S-63 1.1 R everting to P R IMAR C R T If for any reason the migration to S-63 1.1 fails then the PRIMAR.CRT file will need to be reinstalled To this insert any AVCS S-63 1.0 Media into your ECDIS and follow the same process as outlined above, this time selecting the PRIMAR.CRT Your system will now be in the same state as before attempting the upgrade and you can continue to use AVCS S-63 1.0 data However, you should inform your Admiralty Chart Agent of the problems that you have encountered UKHO 2013 All Rights Reserved The copyright in this document, which contains information of a proprietary nature, is vested in UKHO The content of this document may not be used for purposes other than that for which it has been supplied and may not be reproduced, either wholly or in part, in any way whatsoever ...Migrating to IHO certificate for S-63 1.1 Migrating from P R IMAR C R T to IHO. C R T To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS The IHO. CRT is located... location of the IHO. CRT” certificate and select “Open” to load the certificate Select “OK” The IHO. CRT has now been installed and S-63 1.1 data can be loaded into the ECDIS Migrating to IHO certificate