Đang tải... (xem toàn văn)
Bài giảng Máy điện hàng hải biên soạn có nội dung trình bày các kiến thức cơ bản về máy đo sâu hàng hải, tốc độ kế, la bàn con quay, máy lái tự động. Tham khảo nội dung bài giảng để hiểu rõ hơn về các nội dung trên. Hi vọng tài liệu sẽ cung cấp kiến thức cho các bạn.
INSTRUCTION MANUAL GYLOT 107 GYLOT-107 Course setting pointer Course setting knob Steering repearter card Weather Adjustment Dimmer Course indicator Course setting knob (gyro steering) Rudder order indicator Lever steerer Operation selector switch ro Hand Re mo te Hand steering wheel Leve r Gy TOKYO KEIKI PS operation indicator lamp (red) PS operation indicator lamp (blue) Latitude corrector window Handle for opening and closing Latitude corrector Buzzer switch PILOT STARTING: Turn switch from "STOP" to "STAND-BY-START" position then to "RUN" position after makes sure that lamp lights STAND BY START 3 4 NO.2 5 STOP RUN OFF Receptacle NO.1 STOP RUDDER ADJ RATE ADJ GYRO STOPPING: Turn switch from "RUN" to "STAND REPEARTER -BY-STOP" and after leaves switch at "STAND-BY POWER ON -STOP" position after minutes turn to "STOP" GYRO POWER ON PILOT RUNNING NO.2 RUN NO.2 OVERLOAD NO.1 RUN NO.1 OVERLOAD Pilot power supply selector switch Gyro start switch Remote controller (remote steering) RUN PILOT STARTING: Turn switch from "STOP" to "STAND-BY-START" position then to "RUN" position after makes sure that lamp lights STAND BY START NO.2 5 STOP 4 OFF NO.1 STOP RUDDER ADJ RATE ADJ PILOT GY RO STOPPING: Turn switch from "RUN" to "STAND REPEARTER -BY-STOP" and after leaves switch at "STAND-BY POWER ON -STOP" position after minutes turn to "STOP" GYRO POWER ON RUNNING Repearter power Gyro power Running lamp (blue) supply lamp supply lamp (green) (white) NO.2 RUN NO.2 OVERLOAD NO.1 RUN NO.1 OVERLOAD ... GYLOT- 107 Course setting pointer Course setting knob Steering repearter card Weather Adjustment Dimmer