Safety recommendations at petrochemical plant

Polyester: Safety Recommendations SAFETY RECOMMENDATIONS The plant management is responsible for the compiling and adherence to the safety regulations as well as for the appointment of a responsible safety engineer Members, for e.g.: - Safety Engineer - Fire Brigade Chief - Plant Physician - Chief of the Plant Guards - Works Director - etc Responsibilities: - General safety planning - Risk Assessment - Emergency planning - Evacuation procedures - Contacts with external safety organisations, emergency headquarters, alternative scheduling, checklists, e.g on-site health, environment and safety inspection list - etc SAFETY RECOMMENDATIONS For e.g Pre-Startup Safety Review (PSSR) Checklist: Introduction: The purpose of the Pre-Startup Safety Review is to insure that the equipment is safe for startup and continued operation This is accomplished by addressing the following items: To confirm that construction and equipment is in accordance with design specifications, local laws and standards, and that design complies with applicable federal, territorial codes and engineering/customer standards To confirm that Safety, Operating, Maintenance and Emergency Procedures are in place To confirm that a Process Hazard Analysis / HAZOP has been done for new facilities and that recommendations from the PHA/HAZOP have been resolved or implemented before start-up of revamped / new plant To confirm that modified facilities meet the requirements in the Management of Change Policy Verify that Quality Assurance activities have been completed To confirm that the training on operating procedures for each employee involved in operating the Process has been completed To confirm that all Maintenance and Contractor Personnel affected by the new installation or modified facilities have received the required training To insure that all warnings, markings, labels, signs and required safety equipment (i.e., fire extinguishers, flange shields, safety showers, Scott Air Paks, etc.) are installed and ready for service Process Safety Information is in place and accessible to employees SAFETY RECOMMENDATIONS Pre-Startup Safety Review (PSSR) Checklist for: - Process Safety Management Checklist - Fire Protection and Safety Equipment - Piping and Piping Supports - Vessels and Exchangers - Safety Valves - Blowdown, Flare and Pumpout Systems - Rotating Equipment Pumps & Compressors, etc - Electrical - Instrumentation - Interlocks and Alarms - Structural / Civil - Access Ways - Heaters - Tank Farms and Pump Slabs - Sewers and Separators - Cooling Towers/Fin Fans - Material Handling - Manlifts, Passenger and Freight Elevators - Engineering Documentation - Maintenance - Operational, - etc SAFETY RECOMMENDATIONS read carefully: Safety Recommendations and Requirements Doc No IZ-11915 In the Operating Manual, Volume 1A, point and act accordingly For e.g: Prior to the initial start-up of the plant following must be completed or available: - training in safety - instruction in the use of safety devices - safety regulations (welding permit) - fire fighting equipment - local extinguishers - safety goggles or face shields - safety gloves - protective garments - gas masks - water hoses, pipes and connections - emergency exits, fire escapes - first aid station MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET Polyester Thank you very much ... Freight Elevators - Engineering Documentation - Maintenance - Operational, - etc SAFETY RECOMMENDATIONS read carefully: Safety Recommendations and Requirements Doc No IZ-11915 In the Operating Manual,... fire escapes - first aid station MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET Polyester Thank you very much ... ready for service Process Safety Information is in place and accessible to employees SAFETY RECOMMENDATIONS Pre-Startup Safety Review (PSSR) Checklist for: - Process Safety Management Checklist