Truyền thông giữa S7 400 master và ET S7 300 slave

Configuration Simatic Manager.. To open Simatic Manager, select File > “New” project, Create Station 400 and Station 300 to connect Enthernet.

Communication Ethernet between S7 400 Master and S7 300 Slave

COMMUNICATION ENTHERNET BETWEEN S7 400

AND S7 300

I Configuration Simatic Manager

1 To open Simatic Manager, select File > “New” project, Create Station 400 and Station

300 to connect Enthernet

2 Click Hardware S7 400 to open “HW Config Station 400” :

Communication Ethernet between S7 400 Master and S7 300 Slave

3 Click Hardware S7 300 to open “HW Config Station 300” :

Communication Ethernet between S7 400 Master and S7 300 Slave

4 Open Net Pro Ethernet S7 400 S7 300