LABVIEW ͳ MODELING, PROGRAMMING AND SIMULATIONS Edited by Riccardo de Asmundis LabVIEW - Modeling, Programming and Simulations Edited by Riccardo de Asmundis Published by InTech Janeza Trdine 9, 51000 Rijeka, Croatia Copyright © 2011 InTech All chapters are Open Access articles distributed under the Creative Commons Non Commercial Share Alike Attribution 3.0 license, which permits to copy, distribute, transmit, and adapt the work in any medium, so long as the original work is properly cited. After this work has been published by InTech, authors have the right to republish it, in whole or part, in any publication of which they are the author, and to make other personal use of the work. Any republication, referencing or personal use of the work must explicitly identify the original source. Statements and opinions expressed in the chapters are these of the individual contributors and not necessarily those of the editors or publisher. No responsibility is accepted for the accuracy of information contained in the published articles. The publisher assumes no responsibility for any damage or injury to persons or property arising out of the use of any materials, instructions, methods or ideas contained in the book. Publishing Process Manager Iva Lipovic Technical Editor Teodora Smiljanic Cover Designer Martina Sirotic Image Copyright Andrr, 2010. Used under license from Shutterstock.com First published January, 2011 Printed in India A free online edition of this book is available at www.intechopen.com Additional hard copies can be obtained from orders@intechweb.org LabVIEW - Modeling, Programming and Simulations, Edited by Riccardo de Asmundis p. cm. ISBN 978-953-307-521-1 free online editions of InTech Books and Journals can be found at www.intechopen.com [...]... components before ATLAS became available and proved capable of measuring pesticides down to concentrations of 2 μg/mL (Armenta & Lendl, 2010) 18 LabVIEW - Modeling, Programming and Simulations Proprietary Connection RS-232 UV-Detector HPLC-Column Sample Capillary Ultimate 3000 burst XY DI Piezoelectric Dispenser Agilent 0123 UV XY-Stage-Controller Stepper-Motor Stepper-Motor Fig 9 Experimental setup for... 16 different clients are available and listed below The list contains the client identifiers and a short description of the client functionality AC: Self-developed 230V AC power socket The AC client can switch a power socket and is connected to the PC via a RS-232-port BC: Self-developed Boxcar-Integrator This client reads the data, whereas the gating- and trigger-delay have to be set manually at the... Code of the ATLAS server application LabVIEW - Modeling, Programming and Simulations 9 Advanced Total Lab Automation System (ATLAS) This procedure is repeated in the for-loop for each client and after each client responds status:ready the server takes the next available command from the script The corresponding client is identified by its client ID and the command is sent over the corresponding TCP... the server and have the server make decisions based on this data Furthermore, the 20 LabVIEW - Modeling, Programming and Simulations final version and the source code of ATLAS will be made available on our website (http://www.cta.tuwien.ac.at/cavs), to allow other users to use and improve it 5 Acknowledgment The authors want to thank Eva Aguilera Herrador, Julia Kuligowski and Markus Brandstetter for... SAGA-LS accelerator, which consists of magnet power supplies, a radio frequency, and a vacuum monitoring system, should be implemented with communication interfaces, because those are distributed in wide area of the facility, and 22 LabVIEW - Modeling, Programming and Simulations operators have to manipulate these components from the control room The Ethernet LAN is standard communication interfaces and. .. devices from the beam line users An intra-web server is placed in middle zone of facility LAN to deliver the machine parameter in any location of the SAGA-LS facility The intra-web server delivers the status of the accelerator for the beam line users The details of web system and E-mail system are described in section 5.7 24 LabVIEW - Modeling, Programming and Simulations 3 System Implementation 3.1... The logger programs and the trend viewers are constructed using Delphi and Labview respectively ODBC is used for connecting MySQL with Labview 3.2 PC-IOC Recent industrial IO devices are reliable and high-speed access via built-in Ethernet modules can be available Thus we construct the IOC only with such off-the-shelf industrial I/O devices We put PCs between the console computers and the I/O devices,... serious issue on SAGA-LS facility is its tightly restricted budget and, hence, the limited number of staff in the facility Thus, the control system for SAGA-LS should be simple and robust, while inexpensive, easy to develop, to maintain and to be expandable The solution of this problem in the view point of hardware is the usage of the PC and the off-the-shelf products On the other hand for the application... can easily use it with MS-PCs and LabView system with server and client model We adopted Ethernet LAN as communication interfaces with each accelerator devices and PCs, because of its high cost performance For the connectivity to the accelerator hardware, we selected commercial base off-the-shelf distributed input output devices (I/O devices) such as PLC (FA-M3; YOKOGAWA), and Fieldpoint (National... communication between the server and the client is deactivated User interaction on the front panel triggers the event handler which assembles a script command, representing the user input from the GUI, and adds this script command to the command queue triggering the consumer loop execution • programming mode: The server loop is used to send script commands received via the command queue to the ATLAS server . LABVIEW ͳ MODELING, PROGRAMMING AND SIMULATIONS Edited by Riccardo de Asmundis LabVIEW - Modeling, Programming and Simulations Edited by Riccardo de Asmundis Published. orders@intechweb.org LabVIEW - Modeling, Programming and Simulations, Edited by Riccardo de Asmundis p. cm. ISBN 97 8-9 5 3-3 0 7-5 2 1-1 free online editions of InTech Books and Journals can be. their LabVIEW - Modeling, Programming and Simulations 4 current experimental setup ending up with a LabVIEW program built for this specialized task. Dominguez et al. designed a LabVIEW