Digital Business System phần 1 ppsx

Digital Business System Panasonic mm- mama Digital Business System DES 824 Release Notes CPC-S/M Version 2.0 Document Number DBS-824-20-705 Part Number 580X00301 April 2, 1996 PanasonlcB Information & Communications Company Busmess Telephone Systems The contents of this manual are subject to change without notice and do not constitute a commitment on the part of Panasonic Information & Commumcattons Company (PICC) Every effort has been made to ensure the accuracy of this document However, due to ongomg product improvements and revisions Panasonic cannot guarantee the accuracy of prmted matenal after the date of publicatton nor can it accept responsibility for errors or omissions Panasonic will update and revise this document as needed The software and hardware described m thrs document may be used or copied only m accordance with the terms of the license pertammg to said software or hardware Tim document may be reproduced either electromcally or m print as needed by certified dealers and techmcians of DBS products However the mformation contained m this document must not be altered copied or changed m any way that misrepresents the mstallation operation or other function or feature of the DBS product or Panasomc Panasonic assumes no liability for any alternatlon or misrepresentatron of mformahon contained herem 0 Copyright 1996 by Panasomc Information & Communications Company All rights reserved Panasonifi DBS Release Notes April 2 1996 CPC S/M Version 2 0 Introduction CPC-S/M Version 2 0 supports all features of CPC-S/M Version 1 1, as well as offering support for the new Panasonic 44-Series telephones (VB-44xxx) Contents MSG (Message) Key 16 DSS/72 Console - Key Arrangement 18 EM/24 - Key Arrangement 22 Modification to Toll Restriction Service 24 Key Telephone Installation Notes 27 Introduction Page 3 DBS Release Notes Panasonic@ CPC S/M Version 2 0 April 2 1996 44-Series Phone Support CPC-S/M Version 2 0 provides full support for Panasonic’s 44-Senes phones (VB-44xxx) Table I below lists all 44-Series phone models and their part numbers Most models are available m two colors gray and black Table 1 44-Series Phones 16 Key Phone (gray) VB 442106 16 Key Phone (black) VB 442108 16 Key Speakerphone (gray only) VB 442llG 22 Key Phone (gray only) VB 44220G 22 Key Small Display Speakerphone (gray) VB 44223G 22 Key Small Display Speakerphone (black) VB 442238 34 Key Small Display Phone (gray only) VB 44230G I34 Key Small Display Speakerphone (gray) 1 VB 44233G 1 34 Key Small Display Speakerphone (black) VB 442338 22 Key Large Displav Speakerphone (nrav) VB 44225G 22 Key Large Display Speakerphone (black) VB 442258 DSS/72 Console (gray) VB 44320G DSS/72 Console (black) VB 443208 EM/24 Unit (gray) VB 4431 OG EM/24 Unit (black) VB 443108 Page 4 44 Series Phone Support PanasonlcB DBS Release Notes April 2 1996 CPC S/M Version 2 0 New Phone IFeatures hew DBS features that can be executed on the 44-Senes phones are described below Note: The new features introduced with these phones are supported by CPC-S/M Version 2 0, CPC-AH/B Version 8 0, and CPC-EX Version 1 0 You can also use the 44-series phones with previous DBS versions, but the new features won’t be supported Figure 1 44-Series Small-Display Phone 24 Tue NOV 14 ] O+ DIGITAL BUSINESS SYSTEM 44 Series Phone Support Page 5 DBS Release Notes PanasomcO CPC S/M Version 2 0 April 2 1996 Table 2 Key to 44-Series Small-D&splay Phone Used to make outside calls or to access call handlin 0 access ou one IS muted and flashes when other end cannot hear you Used to talk with other 1 3peaKer uuiputs tunes anu voice a~ your extension Page 6 44 Series Phone Support Panasonic@ DBS Release Notes April 2 1996 CPC S/M Version 2 0 Figure 2 44-Senes Large-Display Phone 0 e 0 0 02 28 Thu Langford S PERSONAL DIAL l SYSTEM DIAL . EXTENSION . FUNCTION . HELP . > > A c I I I I Table 3 Key to 44-Series Large-Dtsplay Phone # Feature Description 1 Message Indicator Indicates that you have a message 2 Display Displays mformatlon about phone s status menus dialing directones and text message mformation 3 Soft Keys Used to make outside calls or to access call-handling features 44 Series Phone Support Page 7 DES Release Notes PanasontcB CPC S/M Version 2 0 April 2 1996 5 CONF Key 6 MENU Key 7 PREV Key 8 NEXT Key 9 PROG Key 10 Flexible Function WI Keys 11 DND/CF Indicator 12 MUTE Indicator 13 EXT Indicator 17 I AUTO Key Descrlptlon -Used for Auto-CallBack to a telephone which has left a text message or to access voice messages Used to establish conference calls check FF and one touch key settings, and scroll through messages Used to return to the Mam Menu screen The default Mam Menu screen contains the following items l PERSONAL DIAL l SYSTEM DIAL l EXTENSION l FUNCTION l HELP Used to return to the previous menu Used to advance to the next menu Used to program FF and one touch keys and to adjust ringer volume Depending on the setup of your sys tern may also be used to transfer calls Used to access outside lines or to access call-handling features Indicates that Do-Not Dlsturh Call Forwarding or Absence Message 1s set Indicates that your volCe IS muted - I e , party on the other end cannot hear you Lights solid when your hands-free mtcrophone IS muted and flashes when your handset IS muted Lights when you are on a fall flashes when you hold a call Lights when ON/OFF key has heen pressed Used to redial last outsldc nund-ter dialed Used to actlvate/deaLtlvarc %!I JTE function When activated the party on 11~1 (11 hc r end cannot hear you ISee item 12 MUTE lnd~cd~c~r ) Used to access speed dr;ll II~C ( ntcr account codes or for message waltmg an\u I r c ;UICCI Used to make a call WII~OUI 11l11ng handset Used to end an outsldc L ,111 u14 IO restore di’al tone wlthout hanging up recc I\ I r Used to adjust level 01 10111 h h;iLkground music, rmg mg, receiver volume a1111 41q-43~ contrast Used to hold calls to rc I~IL k t held Lalls and to corn olete FF kev urozramm~~rc PanasonlcB DES Release Notes April 2 1996 CPC S/M Version 2 0 Directory Mode 44-Series phones only CPC-All/B Version 8 0, CPC-S/M Versron 2 0, or CPC-EX Version 10 only Description On the new small-display phones, you can use the phone’s select keys (as well as other keys) to scroll through a directory of existing System Speed Dial (SSD) names, Personal Speed Dial (PSD) names, or extension names and select one to dial For example, if you can’t remember the party’s extension number or speed-dial number to which you want to fiansfer a call on hold, you can use Drrectory Mode to find the number and execute the transfer Note This new feature applies to the 44-series small-display phone only (i e , phones with a 2-line LCD display) Operation The select keys on the 44-series small-display phone are located next to the display’s 2nd line Pressmg select key 1 (; >” on the left) or select key 2 (,‘<“ on the right) will access the displayed directory To use Directory Mode Press the MODE key to turn Directory Mode on The 2nd line of the LCD will display “SSD” on the left and “PSD”on the nght l Press the MODE key again to access the directory for extension names The 2nd line of the LCD will display “EXT” on the left Press the > select key to access the directory of exlstmg SSD or EXT names, or the < select key to access the PSD directory The 2nd line will show two speed-dial or extension names at a time (the first 7 characters of each name), beginning with the A 5 To scroll through the names (two AI a time), press the # key To back-scroll, press the * key To Jump to another letter in tht ti trt~ tory press the numeric key for it For example, press the “6” kq 10 lump to the M’s, N’s, and O’s The M’s will appear first Press 6 ;Igclln lo Jump to the N’s, and again to Jump to the O’s (Note This dot \I\ t hark for PSD names unless the system IS a DBS 824 CPC-M L c rvon 2 0 or higher, which allows up to 40 PSDs ) l For names beginning with Q or / use the 1 key When the correct speed-dial or t \tcn\lon name 1s displayed, you can execute the dialing of its speed ct~al or extension number by pressing the select key that points to it (> it the name 1s displayed on the left, or < if the name IS on the nght) l Or, to exit the directory wlthout seleLtmg a number to dial, press the END key or go on-hook 44 Series Phone Support Page 9 [...]... Installation 5 13 5 -13 5 -13 5 -13 5 -15 5 -16 5 -16 5 -16 5 -17 5 -19 5 -19 5 -19 5 -19 5- 21 5-22 5-22 5-22 5-24 5-24 5-24 5-28 5-28 5-28 Chapter 6 Specifications 6-3 6-3 6-4 Electrical Characteristics Environmental Requirements Resource Maximums Cabling Specifications Communication Parameters Signaling Characteristics Tone Characteristics Issued 3/l/95 6-9 6 -10 6 -10 6 -12 DBS 824 -10 -300 ‘V List of Figures Figure 2- 1 Figure... 3/l 19 5 DBS 824-l O-300 5-27 5-28 5-29 5-30 ’ vii List of Tables Table 1 1 Table 1- 2 Table 2- 1 Table 2-2 Table 4- 1 Table 4-2 Table 4-3 Figure 5- 1 Table 5-2 Table 5-3 Table 5-4 Table 5-5 Table 5-6 Table 5-7 Table 5-8 Table 5-9 Figure 6- 1 Table 6-2 Table 6-3 Table 6-4 Table 6-5 Table 6-6 Table 6-7 Table 6-8 Table 6-9 Table 6 -10 Table 6- 11 Table 6 -12 Table 6- 13 Table 6- 14 Table 6- 15 Table 6- 16 ... Data communications ports Signaling to CO Signaling levels Transmission specifications Tone Plan DTMF frequencies DBS 824 -10 -300 l-2 l-2 2-5 2-7 4-5 4-7 4 -12 5-6 5-9 5 -13 5 -14 5-24 5-25 5-25 5-25 5-25 6-3 6-3 6-3 6-3 6-4 6-4 6-5 6-7 6-9 6 -10 6 -10 6 -10 6 -10 6 -11 6 -12 6 -13 Issued 311 195 ... Contents 3-7 3-8 39 3-9 3 -10 3 -11 CPC and MFRU Options Lnstailation Battery Backup Guidelines Installation System Initialization Chapter 4 Trunks and Lines 4-3 4-3 4-4 4-5 4-5 4-5 4-5 4-5 4-6 4-8 4-8 4-8 4-8 4 -10 4 -10 4 -10 4 -11 4 -11 4 -11 Trunks Trunk Connectors Trunk Connector Pinouts Loop-Start Trunks Guidelines Installation Lines Extension Connectors Extension Connector Pinouts Digital Extensions DSSi72... single music source Figure 5- 10 Installation of music-on-hold/background music - separate music sources 5 -10 5 -12 Figure 5- 11 OPL installation 5 -14 Figure 5- 12 Cable punch-out plate, OPX Adaptor 5 -15 Figure 5- 13 OPX installation 5 -17 Figure 5- 14 External single paging installation (CPC-M only) 5 -18 Figure 5- 15 External zone paging installation (CPC-M only) Figure 5- 16 External ringer (UNA device)... only calls 10 1XXXXO only calls 0 + additional digits 00 + additional digits 10 1 XXXXO + additional digits 01 + additional digits per Overseas Access Switch and International Calls Switch 1OlXXXXOl + additional digits per Overseas Access Switch and Interna bona1 Calls Switch 0 only and 00 only calls IOlXXXXO only calls 0 + additional digits 00 + additional digits 1OlXXXXO + additional digits 01 + additional... DSS #4) 1s assigned to its extension number in the FF3 (ExtPort)# 2# (ll -14 )# where 11 IS the first DSS console for the first attendant 12 IS the second DSS console for the first attendant 13 IS the first DSS console for the second attendant 14 IS the second DSS console for the second attendant l l l l Page 20 44 Series Phone Support DE3.S Release Notes CPC S/M Version 2 0 Panasonic8 April 2 19 96 The... Switch 0 only and 00 only calls 10 XxX0 only calls Z = New Format (10 1XXXX ONI Y) Action 1 ype of Call 3 Allow Allow/Deny 0 onlv and 00 only calls 1OlXXXXO only calls 0 + additional d&s per TRS tables ‘00 + additional digIts per TRS tables 01 + additional digits per TRS tables Overseas Access Switch and Interna tional Calls Switch IOIXXXXO + additional digIts per TRS tables 10 1XXXXOl + additional digits... the system will check the mternational calls switches (FF7 l# I# and FF7 l# 19 #) tf “ 01 “, “IOXXXOl”, or “lOXXXXO1” is dialed For settings 2 and 3, the system will not consider TRS settings for the trunk DBS Release Notes CPC S/M Version 2 0 PanasonlcB April 2 19 96 Key Telephone Installation Notes Desr Strrp Cover The 44-Senes Key Telephones are shipped with a thin green protective film over the Des1... International Calls Switch 10 1XXXXOl + additional digits per Overseas Access Switch and Interna tional Calls Switch Modification to Toll Restmtion Serwce Page 25 Panasonic@ April 2 19 96 DBS Release Notes CPC S/M Version 2 0 Notes l l l l l The Operator Access address applies only to DBS systems using the new (19 95) NANP dialing plan (FF7 I# 17 # l#), and to TRS types 2-6 (TRS types 0 and 1 do not allow outbound . a call WII~OUI 11 l11ng handset Used to end an outsldc L ,11 1 u14 IO restore di’al tone wlthout hanging up recc I I r Used to adjust level 01 10 111 h h;iLkground . Digital Business System Panasonic mm- mama Digital Business System DES 824 Release Notes CPC-S/M Version 2.0 Document Number DBS-824-20-705 Part Number 580X003 01 April 2, 19 96 PanasonlcB Information. S/M Version 2 0 April 2 19 96 5 CONF Key 6 MENU Key 7 PREV Key 8 NEXT Key 9 PROG Key 10 Flexible Function WI Keys 11 DND/CF Indicator 12 MUTE Indicator 13 EXT Indicator 17 I AUTO Key Descrlptlon -Used