Process Engineering Equipment Handbook Episode 3 Part 11 ppsx

1998 ASME Boiler & Pressure Vessel Code An International Code The Boiler and Pressure Vessel Code establishes rules of safety governing the design, fabrication and inspection of boilers and pressure vessels, and nuclear power plant components during construction. The objective of the rules is to ensure reasonably certain protection of life and property and to provide a margin for deterioration in service. Advancements in design and material and the evidence of experience are constantly being added by addenda. Prices include update service through 2000. 3-year update service includes: ᭿ Addenda issued once per year: July 1, 1999 and 2000. ᭿ Supplements issued four times per year for each Code Cases book. ᭿ Interpretations issued twice per year: with Addenda, in July 1998 and in December 1998, 1999, and 2000. Note: Interpretations will not be available separately and are issued as part of the update service to the individual sections of the Code. Interpretations to Section III, Divisions 1 and 2 are issued as part of the update to Subsection NCA. CS-22 Running Head I Power Boilers Order No. QX0010 $210.00 II Materials Part A—Ferrous Material Specifications Order No. QX002A $385.00 Part B—Nonferrous Material Specifications Order No. QX002B $350.00 Part C—Specifications for Welding Rods, Electrodes, and Filler Metals Order No. QX002C $350.00 Part D—Properties Order No. QX002D $315.00 III Rules for Construction of Nuclear Power Plant Components Subsection NCA General Requirements for Division 1 and Division 2 Order No. QX003R $240.00 Division 1 Subsection NB Class 1 Components Order No. QX003B $240.00 Subsection NC Class 2 Components Order No. QX003C $240.00 Subsection ND Class 3 Components Order No. QX003D $240.00 Subsection NE Class MC Components Order No. QX003E $240.00 Subsection NF Supports Order No. QX003F $185.00 Subsection NG Core Support Structures Order No. QX003G $185.00 Subsection NH Class 1 Components in Elevated Temperature Service Order No. QX003H $240.00 Appendices Order No. QX003A $250.00 Division 2 Code for Concrete Reactor Vessels and Containments Order No. QX0032 $295.00 Division 3 Containment Systems and Transport Packagings for Spent Nuclear Fuel and High Level Radioactive Waste Order No. QX0033 $275.00 IV Heating Boilers Order No. QX0040 $195.00 V Nondestructive Examination Order No. QX0050 $215.00 VI Recommended Rules for the Care and Operation of Heating Boilers Order No. QX0060 $125.00 VII Recommended Guidelines for the Care of Power Boilers Order No. QX0070 $145.00 VIII Pressure Vessels Division 1 Order No. QX0081 $385.00 Division 2 Alternative Rules Order No. QX0082 $385.00 Division 3 Alternative Rules for Construction of High Pressure Vessels Order No. QX0083 $295.00 IX Welding and Brazing Qualifications Order No. QX0090 $215.00 X Fiber-Reinforced Plastic Pressure Vessels Order No. QX0100 $185.00 XI Rules for Inservice Inspection of Nuclear Power Plant Components Order No. QX0011 $370.00 Code Cases: Boilers and Pressure Vessels Order No. QX0120 $275.00 Code Cases: Nuclear Components Order No. QX012N $315.00 Binder Order No. QX0140 $20.00 Special Price for Complete Code Order No. QX0230 $6,550.00 Complete Code Plus 30 Binders Order No. QX0330 $7,150.00 TO ORDER: Call toll free: 800-843-2763 Fax: 973-882-1717 Write: ASME 22 Law Drive Box 2300 Fairfield, NJ 07007-2300 Email: infocentral@asme.org All orders require a valid purchase order. When ordering with your company purchase order, please make sure that your ASME account number, if available, is indicated. This account number can be found on ASME invoices, packing lists, and statements. Prices subject to change without notice. Shipping/handling charges added to every order. Accreditation Packages Code books required for use with ASME Code Symbol Stamps Note: For books other than the Boiler and Pressure Vessel Code (B31.1, PTC 25.3, NQA-1), the required edition as of July 1, 1998 is listed. The specific effective Addenda will be referenced in the applicable Boiler and Pressure Vessel Code section. Later editions of these referenced books will be required if and when referenced by the applicable Boiler and Pressure Vessel Code section. CODE PP PRESSURE PIPING SYMBOL S POWER BOILERS STAMPS CODE BOOKS REQUIRED SECTION I—POWER BOILERS SECTION V—N ONDESTRUCTIVE EXAMINATION SECTION II—MATERIALS SECTION IX—WELDING & BRAZING Part A Ferrous Material Specifications QUALIFICATIONS Part B Nonferrous Material B31.1-1995—POWER PIPING Specifications Part C Specifications for Welding Rods, Electrodes and Filler Metals **ORDER NO. BPVCA Part D Properties $2,204.00 CODE E ELECTRIC BOILERS SYMBOL STAMP CODE BOOKS REQUIRED SECTION I—POWER BOILERS B31.1-1995—POWER PIPING SECTION II—MATERIALS Part A Ferrous Material Specifications Part B Nonferrous Material Specifications **ORDER NO. BPVCE Part D Properties $1,429.00 CODE U2 PRESSURE VESSELS (DIV. 2) SYMBOL STAMP CODE BOOKS REQUIRED SECTION II—MATERIALS SECTION V—NONDESTRUCTIVE EXAMINATION Part A Ferrous Material Specifications SECTION VIII—PRESSURE VESSELS, DIVISION 2- Part B Nonferrous Material A LTERNATIVE RULES Specifications SECTION IX—WELDING &BRAZING QUALIFICATIONS Part C Specifications for Welding Rods, Electrodes and Filler Metals ORDER NO. BPVU1 Part D Properties $2,215.00 CODE U3 PRESSURE VESSELS (DIV. 3) SYMBOL STAMP CODE BOOKS REQUIRED SECTION II—M ATERIALS SECTION V—NONDESTRUCTIVE EXAMINATION Part A Ferrous Material Specifications SECTION VIII—PRESSURE VESSELS, DIVISION 3- Part B Nonferrous Material ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH Specifications P RESSURE VESSELS Part C Specifications for Welding Rods, SECTION IX—WELDING &BRAZING QUALIFICATIONS Electrodes and Filler Metals ORDER NO. BPVU3 Part D Properties $2,125.00 CODE H HEATING BOILERS EXCEPT CAST IRON SYMBOL HLW LINED POTABLE WATER HEATERS STAMPS CODE BOOKS REQUIRED SECTION II—M ATERIALS SECTION IV—HEATING BOILERS Part A Ferrous Material Specifications SECTION IX—W ELDING &BRAZING Part B Nonferrous Material QUALIFICATIONS Specifications Part C Specifications for Welding Rods, ORDER NO. BPHLW Electrodes and Filler Metals $1,495.00 Running Head CS-23 CODE A ASSEMBLY OF POWER BOILERS SYMBOL STAMP CODE BOOKS REQUIRED SECTION I—POWER BOILERS SECTION IX—WELDING &BRAZING QUALIFICATIONS SECTION II—MATERIALS B31.1-1995—POWER P IPING Part C Specifications for Welding Rods, Electrodes and Filler Metals **ORDER NO. BPVCB SECTION V—NONDESTRUCTIVE EXAMINATION $1,154.00 CODE U PRESSURE VESSELS (DIV. 1) SYMBOL UM MINIATURE PRESSURE VESSELS STAMPS CODE BOOKS REQUIRED SECTION II—MATERIALS SECTION V—NONDESTRUCTIVE EXAMINATION Part A Ferrous Material Specifications SECTION VIII—PRESSURE V ESSELS , DIVISION 1 Part B Nonferrous Material SECTION IX—WELDING & B RAZING QUALIFICATIONS Specifications Part C Specifications for Welding Rods, ORDER NO. BPVUM Electrodes and Filler Metals $2,215.00 Part D Properties CODE RP FIBER-REINFORCED PLASTIC VESSELS SYMBOL STAMP CODE BOOKS REQUIRED SECTION X—FIBER-REINFORCED PLASTIC VESSELS ORDER NO. BPVRP $185.00 CODE H CAST IRON SECTIONAL HEATING BOILERS SYMBOL STAMP CODE BOOK REQUIRED SECTION IV—HEATING BOILERS ORDER NO. BPVCH $195.00 CODE H FIELD ASSEMBLY OF BOILERS SYMBOL STAMP CODE BOOKS REQUIRED SECTION IV—HEATING BOILERS ORDER NO. BPVCH SECTION IX—WELDING & BRAZING QUALIFICATIONS $410.00 CODE UD RUPTURE DISK DEVICES SYMBOL STAMP CODE BOOKS REQUIRED† SECTION II—M ATERIALS SECTION VIII—P RESSURE VESSELS DIVISION 1 Part A Ferrous Material Specifications SECTION IX—W ELDING &BRAZING QUALIFICATIONS Part B Nonferrous Material PTC 25-1994—PRESSURE RELIEF DEVICES Specifications Part C Specifications for Welding Rods, Electrodes and Filler Metals ORDER NO. BPUD Part D Properties $2,049.00 CODE UV PRESSURE VESSELS SAFETY VALVES SYMBOL STAMP CODE BOOKS REQUIRED† SECTION II—M ATERIALS SECTION IX—WELDING &BRAZING QUALIFICATIONS Part A Ferrous Material Specifications PTC 25-1994—PRESSURE RELIEF DEVICES Part B Nonferrous Material Specifications ORDER NO. BPUV1 Part C Specifications for Welding Rods, (INCLUDES SECTION VIII, DIV. 1) Electrodes and Filler Metals $2,049.00 Part D Properties ORDER NO. BPUV2 SECTION VIII—PRESSURE VESSELS DIVISION 1 (INCLUDES SECTION VIII, DIV. 2) OR DIVISION 2 $2,049.00 CS-24 Running Head CODE UV3 PRESSURE VESSELS SAFETY VALVES SYMBOL STAMP CODE BOOKS REQUIRED† SECTION II—MATERIALS SECTION VIII—PRESSURE VESSELS DIVISION 3 Part A Ferrous Material Specifications SECTION IX—WELDING &BRAZING Q UALIFICATIONS Part B Nonferrous Material Specifications PTC 25-1994—PRESSURE RELIEF DEVICES Part C Specifications for Welding Rods, Electrodes and Filler Metals ORDER NO. BPUV3 Part D Properties $1,959.00 CODE M MINIATURE BOILERS SYMBOL STAMP CODE BOOKS REQUIRED SECTION I—POWER B OILERS SECTION IX—WELDING & BRAZING QUALIFICATIONS SECTION II—MATERIALS B31.1-1995—POWER PIPING Part A Ferrous Material Specifications Part B Nonferrous Material Specifications Part C Specifications for Welding Rods, Electrodes and Filler Metals **ORDER NO. BPVCM Part D Properties $1,989.00 CODE HV HEATING BOILER SAFETY VALVES SYMBOL STAMP CODE BOOKS REQUIRED‡ SECTION II—M ATERIALS SECTION IV—HEATING BOILERS Part A Ferrous Material Specifications SECTION IX—WELDING &BRAZING QUALIFICATIONS Part B Nonferrous Material Specifications PTC 25-1994—PRESSURE RELIEF DEVICES Part C Specifications for Welding Rods, ORDER NO. BPVHV Electrodes and Filler Metals $1,544.00 CODE V BOILER SAFETY VALVES SYMBOL STAMP CODE BOOKS REQUIRED† SECTION I—POWER BOILERS SECTION IX—WELDING &BRAZING QUALIFICATIONS SECTION II—M ATERIALS PTC 25-1994—PRESSURE RELIEF DEVICES Part A Ferrous Material Specifications Part B Nonferrous Material Specifications Part C Specifications for Welding Rods, Electrodes and Filler Metals ORDER NO. BPVCV Part D Properties $1,874.00 QUALITY SYSTEM CERTIFICATES MATERIAL MANUFACTURERS, MATERIALS SUPPLIERS CODE BOOKS REQUIRED SECTION III—Rules for Construction of Nuclear Power Plant Components Subsection NCA-General Requirements for Division 1 and Division 2 Appendices SECTION II—Materials (Select applicable parts) Part A Ferrous Material Specifications Part B Nonferrous Material Specifications Part C Specifications for Welding Rods, Electrodes and Filler Metals Part D Properties ORDER NO. BPVMS (SEE PAGE 23 FOR PRICES) Applicants should note that they may need one or more of the following subsections of Section III depending on the scope of their work to appear on the certificate. In addition, these subsections contain material requirements on Section 2000 which reference Section V and Section IX. Subsection NB-Class 1 Components Subsection NC-Class 2 Components Subsection ND-Class 3 Components Subsection NE-Class MC Components Subsection NF-Supports Subsection NG-Core Support Structures Subsection NH-Class 1 Components in Elevated Temperature Service SECTION V—Nondestructive Examination SECTION IX—Welding and Brazing Qualifications (SEE PAGE 23 FOR ORDER NUMBERS AND PRICES) Running Head CS-25 CODE N TYPE CERTIFICATES OF SYMBOL AUTHORIZATION AND STAMPS CERTIFICATES OF ACCREDITATION N, NA, NPT CODE BOOKS REQUIRED SECTION II—M ATERIALS Part D Properties (N and NA only) SECTION III—RULES FOR CONSTRUCTION OF NUCLEAR POWER PLANT COMPONENTS SUBSECTION NCA-GENERAL REQUIREMENTS FOR DIVISION 1 AND DIVISION 2 (NOT REQUIRED FOR SECTION III-3) APPENDICES SECTION V—NONDESTRUCTIVE EXAMINATION SECTION IX—WELDING & BRAZING QUALIFICATIONS NQA-1-1989—QUALITY ASSURANCE PROGRAM REQUIREMENTS FOR NUCLEAR F ACILITIES ORDER NO. BPNPT (SEE PAGE 23 FOR PRICES) Applicants should note that they may need one or more of the following Parts of Section II and Subsections of Section III depending on the scope of their work to appear on the certificate. SECTION II—MATERIALS Part A Ferrous Material Specifications Part B Nonferrous Material Specifications Part C Specifications for Welding Rods, Electrodes and Filler Metals Part D Properties (NPT only) Subsection NB-Class 1 Components Subsection NC-Class 2 Components Subsection ND-Class 3 Components Subsection NE-Class MC Components Subsection NF-Supports Subsection NG-Core Support Structures Subsection NH-Class 1 Components in Elevated Temperature Service Division 2: Code for Concrete Reactor Vessels and Containments Division 3: Containment Systems and Transport Packaging for Spent Nuclear Fuel and High Level Radioactive Waste (SEE PAGE 23 FOR ORDER NUMBERS AND PRICES) CODE NV NUCLEAR SAFETY AND SYMBOL PRESSURE RELIEF VALVES STAMP CODE BOOKS REQUIRED SECTION III—R ULES FOR CONSTRUCTION OF NUCLEAR POWER PLANT COMPONENTS SUBSECTION NCA-GENERAL REQUIREMENTS FOR DIVISION 1 AND DIVISION 2 A PPENDICES SECTION II—M ATERIALS (SELECT APPLICABLE PARTS ) Part A Ferrous Material Specifications Part B Nonferrous Material Specifications Part D Properties SECTION V—N ONDESTRUCTIVE EXAMINATION SECTION IX—WELDING & BRAZING QUALIFICATIONS PTC 25-1994—PRESSURE RELIEF DEVICES NQA-1-1989—QUALITY ASSURANCE PROGRAM REQUIREMENTS FOR NUCLEAR FACILITIES ORDER NO. BPNVA (WITH SECTION II, PART A) ORDER NO. BPNVB (WITH SECTION II, PART B) ORDER NO. BPNVD (WITH SECTION II, PART D) (SEE PAGE 23 FOR PRICES) Applicants should note that they may need one or more of the following subsections of Section III depending on the scope of their work to appear on the certificate. Subsection NB-Class 1 Components Subsection NC-Class 2 Components Subsection ND-Class 3 Components Subsection NH-Class 1 Components in Elevated Temperature Service (SEE PAGE 23 FOR ORDER NUMBERS AND PRICES) ** Packages marked with two asterisks include the 1998 edition of B31.1. † Sections II and IX are not required for assemblers. Section II, Part C and Section IX are not required for manufacturers if welding and brazing are not within the scope of their work. ‡ Section II, Part C and Section IX are not required for manufacturers if welding and brazing are not within the scope of their work. CS-26 Running Head ASME 9000 ASME International’s ISO 9000 Registration Program The American Society of Mechanical Engineers has been a world leader in codes, standards, accreditation, and certification for over a century. These programs have now been extended to include the registration (certification) of quality systems in conformance with the standards set by the International Organization of Standardization (ISO). ASME’s ISO 9000 Registration Program is accredited by the American National Accreditation Program for Registrars of Quality Systems (ANSI-RAB) and the Dutch Council for Accreditation (RvA). ASME specializes in the registration of domestic and international suppliers of mechanical equipment and related materials, items, and services in the industries and sectors associated with the art, science, and practice of mechanical engineering. These industries include: ᭿ Primary metals industries ᭿ Fabricated metal products ᭿ Industrial and commercial machinery and equipment ᭿ Reinforced thermoset plastic tanks and vessels ᭿ Engineering services ASME uses quality system auditors experienced in the above-listed fields who have been certified to the international auditor qualification standard ISO 10011-2. Registration decision and policy making are conducted within the framework of the ASME codes, standards, accreditation, and certification committee structure. The use of volunteers from industry and government provides for a high quality program that is administered in a fair, impartial, and professional manner. Over 4,000 companies from 57 countries are currently accredited by ASME in one or more of the following quality assurance based programs: ᭿ Authorized Inspection Agency (AIA) ᭿ Boiler and Pressure Vessel ᭿ Fastener Manufacturers and Distributors (FAP) ᭿ Nuclear Components ᭿ Nuclear Materials (MM & MS) ᭿ Qualification of Elevator Inspectors (QEI) ᭿ Reinforced Thermoset Plastic Corrosion Resistant Vessel Fabricators (RTP) ᭿ Safety and Pollution Prevention Equipment (SPPE) Attention all ASME Boiler & Pressure Vessel Certificate Holders! Reduce assessment fees and achieve consistency by combining your upcoming shop review with an ISO 9000 assessment. ASME will utilize Auditors who are both qualified as BPV Team Leaders and ISO 9000 Assessors. Capitalize on this unique opportunity now—contact ASME. For additional information write to: ASME Conformity Assessment Three Park Avneue New York, NY 10016-5990 or call Raj Manchanda at 212-591-8033. Fax 212-591-8599. E-Mail: accreditation@asme.org Running Head CS-27 Asme Certification Programs ASME administers four certification programs for technical personnel based on ASME standards that define the necessary qualifications of the individuals. One additional program is in development. Operators of Resource Recovery Facilities Processing Municipal Solid Waste (MWCs) ᭿ Applies to persons who hold, or wish to hold, the positions of Shift Supervisor or Chief Facility Operator ᭿ Candidates are required to meet minimum education and experience requirements and pass a written multiple-choice examination for provisional certification ᭿ Full certification is obtained through a site-specific oral examination Operators of Medical Waste Incinerators (MWIs) ᭿ Applies to persons who hold, or wish to hold, the positions of Operator or Operator Supervisor ᭿ Candidates are required to demonstrate proficiency in the operation of the equipment and pass a written multiple-choice examination ᭿ “Special Class” operator certification also available for persons in related fields (regulatory personnel, trainers, equipment manufacturers, etc.) Operators of Hazardous Waste Incinerators ᭿ Applies to Control Room Operators, Field Operators (waste receiving and handling, field equipment operation, and residual handling), and Supervisors ᭿ Candidates are required to complete training in safety, combustion fundamentals, and basic operation, and pass a written multiple-choice examination for provisional certification ᭿ Full certification is obtained through a site-specific oral examination in development Geometric Dimensioning and Tolerancing Professionals Certification Exam To certify your competence in using the Geometric Dimensioning and Tolerancing Y14.5 Standard, register now for the new certification exam sponsored by ASME. You can obtain certification on one of the following two levels: ᭿ Technologist GDTP, which provides objective measure of your ability to understand drawings prepared using the Y14.5 Standard ᭿ Senior GDTP, which provides additional objective measure of your ability to select geometric controls and apply them properly to drawings Exams are given in various cities. Please contact ASME for the exam location nearest you. To obtain an exam application and full details, return this card, or Phone: Raj Manchanda at 212-591-8033 Fax: 212-591-8599 E-mail: accreditation@asme.org Or visit the Codes & Standards area of the ASME Web site: http://www.asme.org ᭿ Candidates will be required to pass a written multiple-choice examination based on the ASME Y14.5 Standard CS-28 Running Head Operators of High Capacity Fossil Fuel Fired Plants (in development) ᭿ Applies to operators of oil, gas, and coal fired boilers with heat input greater than 10,000,000btu/h ᭿ Certification criteria will include evaluation of qualifications in both safety and air emissions Geometric Dimensioning and Tolerancing Professionals ᭿ Applies to designers, drafters, manufacturing engineers, CAD/CAM users, and others who need to understand the meaning of symbols, modifiers, and relationships of GD&T as applied to engineering drawings and related documents For examination schedules and additional information, contact: ASME Conformity Assessment Three Park Avenue New York, NY 10016-5990 Tel: 212-591-8591 Fax: 212-591-8599 E-Mail: accreditation@asme.org Asme A17 CD-ROM for Elevators and Escalators The ASME A17 CD-ROM for Elevators and Escalators features access to the current A17 collection from your desktop: ᭿ ASME A17.1-1996 Safety Code for Elevators and Escalators ᭿ ASME A17.2.1-1996 Inspectors’ Manual for Electric Elevators ᭿ ASME A17.2.2-1994 (through A17.2.2b-1996) Inspectors’ Manual for Hydraulic Elevators ᭿ ASME A17.2.3-1994 (through A17.2.3a-1996) Inspectors’ Manual for Escalators and Moving Walks ᭿ ASME A17.3-1996 Safety Code for Existing Elevators and Escalators ᭿ INTERPRETATIONS for A17.1, A17.2.2., and A17.3 ᭿ Graphic images of all equations, figures, and tables assure fidelity of all visual information. Sophisticated search capacities . . . navigational ease . . . custom annotation . . . customer support The A17 CD-ROM gives you the freedom to move through the Code books unconstrained by pages (for your convenience, page numbers that match those of the print publications are provided). The clean, clear visual design inherits its colors from your own Windows choices. The combination of browsing and focused searching capabilities allows you to thoroughly and quickly investigate the ASME Elevator and Escalator Code. Full Test Browser delivers compact, easily accessible electronic information, built from the same data that created the printed ASME A17 series books. It’s simple to move through the collection, scanning the table of contents at any level of detail— from book titles to chapter titles to designated paragraphs. View the full table of contents or list tables or figures in the Table of Contents view. Jump to selected items with a click. The full text of the publications can also be read start to finish, more like a traditional book. Running Head CS-29 Order No. Description Price A14401 Stand Alone License $495 A14405 Network License, 2–5 users $1,100 A14410 Network License, 6–10 users $1,500 (NA) Network License, more than 10 users * *For more than 10 users, please call ASME Information Central (800-843-2763) for a price quote. Prices include an automatic subscription to the next two updated A17 CD-ROM. PC Requirements: System requirements for installation on a stand-alone personal computer are: *386DX processor minimum, 486 or higher preferred * 8 MB RAM minimum, with 500KB free conventional memory * hard drive with approximately 7MB of free space for software installation and 1MB of additional free space for temporary files during program operation * mouse * VGA or SVGA monitor (SVGA preferred) with compatible video card (high-performance card preferred) * CD-ROM drive compatible with Microsoft Compact Disc Extensions (MSCDEX) and ISO 9660 * Microsoft Compact Disc Extensions (MSCDEX), version 2.2 or higher * DOS version 5.0 or higher * Microsoft Windows, 3.1 or higher, running in 366 Enhanced mode; Windows 95. The Boiler and Pressure Vessel Code on CD-ROM* The Code on CD-ROM provides pinpoint searching accuracy. The power of the computer allows you to search the entire Code for the occurrence of a single word or a complex combination of terms. You may browse the database by Title or Table of Contents, or by a specially developed thesaurus of subject classifications. Electronic delivery allows you to quickly and easily investigate the Code. An especially convenient and time-saving feature called Hot Link allows you to skip from a particular point in the Code to referenced sections, tables, graphs, or equations and then back to the original text. *For the purpose of ASME accreditation, electronic versions of the Boiler & Pressure Vessel Code do not replace the need for a single hard copy version. The Worldwide Standards Service—ASME from IHS Make your research time more productive by having ASME documents available at your desk whenever you need them. With the American Society of Mechanical Engineers (ASME) documents available on CD-ROM you can view complete, full-text documents—exact images of the hardcopy originals—right at your own personal computer. The service contains the full text of all ASME Standards and Performance Test Codes. Included in every subscription is the comprehensive Worldwide Standards Service Index, which helps you locate standards by document number or by keyword. In addition to ASME documents, the Worldwide Standards Service Index contains document listings from approximately 400 of the world’s leading standards developing bodies. The service is updated every 60 days to keep you abreast of all current revision activity. For more information on the Boiler Code on CD-ROM or Worldwide Standards Service and free demo diskettes, call toll-free: 800-241-7824. Information Handling Services ® 15 Inverness Way East, P.O. Box 1154 Englewood, Colorado USA 80150 303-790-0600, ext. 59 CS-30 Running Head Electronic Stress Tables Software based on ASME boiler and pressure vessel code section II, Part D ASME has good news for engineers who use the traditional methods of searching through stress tables. The new Electronic Stress Tables based on the ASME Boiler and Pressure Vessel Code Section II, Part D (Materials Properties) makes your search easier and faster. Designed to give you quick and accurate access to any or all BPVC Section II, Part D stress tables, the program provides a time-saving alternative to wading through eye-straining pages of spreadsheets. You’ll find the software not only speeds your search, but also presents the information in a highly visual format, complete with notes and printing capability. Search options Fifteen different fields allow you to narrow your search criteria (filter), or reorder the data displayed (sort). The software allows you to create multiple line criteria for logical groupings and to add additional fields to create a compound sort. Create Excel Spreadsheets Import any or all of the tables into an Excel spreadsheet in a numeric format. You must have a copy of Excel installed on your PC to run this addition to the application. Highly compatible To get started, all you need is an IBM or 100% compatible CPU running Windows 3.1, Windows NT or Windows 95, 12 megabytes of disk space, 4 megabytes of RAM, SVGA display, and 3.5≤ floppy drive. Order No. DBOIID $265 RA-search on-line service RA-search is a computer-based text retrieval program developed by Reedy Engineering. It contains full text searching and viewing capabilities of the more than 6,000 ASME Interpretations published that relate to the Codes and Standards listed below. RA-search’s database includes all of the published Interpretations to the following ASME Codes and Standards: ᭿ all published Boiler and Pressure Vessel Code Interpretations (Sections I, II, III- 1 & 2, IV, V, VI, VII, VIII-1 & 2, IX, X and XI) ᭿ all published NQA-1 and NQA-2 Interpretations ᭿ all published B16 (B16.3, B16.5, B16.15 and B16.34) and B31 (B31.1, B31.3, B31.4, B31.5, B31.8 and B31.9) Interpretations ᭿ A39, A90, A112, B1, B2, B15, B18, B20, B30, B36, B56, B73, B94, CSD, MH14, N45.2, N509, N510, PTC’s RA-search costs $500 per year plus $3.00 per minute of on-line access. The annual rate is invoiced at the start of your subscription and the access charges are billed monthly. To start your subscription to RA-search Interpretations, or if you have any questions, contact: Rick Swayne, Reedy Engineering, 3425 South Bascomb Avenue, Campbell, CA 95008; or call 408-558-0330 Running Head CS-31 [...]... C -35 6 manifold flow (fuel) control in, C-4 03 to C-408 modular component units for, A-40 monitoring logic in, C -33 6 open loop, in magnetic bearings, B-10 overload/overspeed protection in, C -33 6, C -34 3 to C -35 0, C -36 8 to C -37 4 power limitation in, C -33 3, C -35 0 to C -35 4 pressure control in, C -33 3, C -36 8 to C -37 4, C -38 3 to C -38 8 process control in, C -33 3 to C -33 4 proportional conversion of electrical control... in, C -35 4 to C-408 safety systems and, C -33 2 to C -33 3 SCADA in, C -35 5 sensors for, C -37 7 to E-18 short circuit control, C -34 4 steam turbines and, T-78 to T-79 stepper motor–driven valves in, C-4 03 to C-405 switches for, C -37 7 to E-18 temperature limitation in, C -33 3, C -37 7 to C -38 2 torque control, C -34 4 to C -34 5 turbocompressors, C -33 1 to C -33 6 valves for, CE-18 to CE -39 2 vaporizers, V-25 to V -31 vibration... damping, A-28, A -33 , C-264, C -30 7 to C -31 3 amplitude in, C -31 5 to C -31 7 critical damping in, C -31 2 to C -31 3, C -31 5 In-8 Index displacement and, C -31 4 to C -31 5 forced vibration in, C -31 3 to C -31 6 friction (coulomb) damping in, C -30 7 inertia in, C -31 4 to C -31 5 magnification factor (D/F/k) in, C -31 6 natural frequency in, C -31 6 overdamping and decay in, C -31 2 phase angle in, C -31 5 to C -31 6 solid or structural... supply, C -35 0 to C -35 4 ovens, drying, D-4 overdamping, C -31 2 overhaul and repair processes, chemical cleaning, C -38 overload/overspeed control, A-47 to A-48, C -33 6, C -34 3 to C -35 0 brake properties at high speed and acceleration, C -34 7 to C -35 0 clutch type couplings in, C -34 7 constant fill couplings, C -34 7 fault conditions and, C -34 4 gas turbines, C -33 6, C -34 3 to C -35 0 gearboxes in, C -34 3, C -34 5 hydrodynamic... measurement), C -38 3 to C -38 8 absolute pressure, C -38 3 accuracy and lifespan of, C -38 7 applications and cost of, C -38 7 to C -38 8 Belleville washer negative spring rate sensor in, C -38 6 to C -38 7 bellows type sensors in, C -38 6 Bourdon tube sensors in, C -38 3 to C -38 5 differential pressure-actuated, C -38 3 gauge type instruments in, C -38 3 helical tube sensors in, C -38 6 metal diaphragm sensors in, C -38 3 negative... pressure angle, worm gears, P-84 pressure control, C -33 3 to C -33 4 in steam turbines, C -36 8 to C -37 4 in turbocompressors, C -33 3 pressure differential transmitter (PDT), C -33 3 to C -33 4 pressure gauge, C-107 pressure head, P-221 to P-224 pressure head flow measurement, C -38 9 pressure measurement (See also pressure switches), C -32 8 to C -33 9, M-14 to M -31 absolute pressure in, M-14 to M-15 alphatron gauges... regulation, C-4 03 to C-408 fuel regulators current to pressure (I/P) converters for, C -39 2 to C-401 eroderivative fuel regulator for gas turbine, C -35 4 to C -35 8 fuel skid, F -34 to F -36 fuel systems and control actuators for, F -30 , F -31 , F -33 to F -34 emissions control in, F -30 features of, F -30 to F -33 schematic of, F -32 servomotor actuated plug metering valve in, F -36 skid for, fuel skid, F -33 to F -34 testing... spring rate sensor in, C -38 6 to C -38 7 piston type, C -38 5 to C -38 6 proof pressure in, C -38 3 unsealed piston sensors in, C -38 7 pressure transducers, C -32 9 pressure transmitter, C -32 9, C -33 3 to C -33 4 pressure vessels, Sp-17 ASME accreditation packages for, Sp-25 to Sp-28 ASME CD-ROM for, Sp -32 ASME codes, Sp -35 books of interest on, Sp -37 to Sp -38 data report forms for, Sp -36 to Sp -37 international code... scan in, M -37 eddy current testing in, M -36 laser techniques in, M -37 liquid penetrant (LPI) in, M -36 to M -37 magnetic particle, M -36 metallurgy and, M -35 nondestructive test/ (NDT/NDI), M -35 to M -36 radiographic, M -35 ultrasonic, M -36 instrumentation (See also condition monitoring; control systems; measurement), Sp-1 to Sp -3 in reciprocating (labyrinthine) compressors, C-1 03, C-108, C -111 in sound... M -32 air plasma coatings in, M -35 anticorrosion coatings, C-442 autoclaving in, M -34 brazing, M -32 casting in, M- 43 cleaning and stripping in, M -32 , M -34 coatings in, M -34 to M -35 computer aided tomography (CAT) scan in, M -37 dabber TIG welding in, M -38 drilling in, M -35 eddy current testing in, M -36 electrical discharge machining (EDM) in, M -35 Index fluoride ion cleaning in, M -34 forging in, M-43 . published B16 (B16 .3, B16.5, B16.15 and B16 .34 ) and B31 (B31.1, B31 .3, B31.4, B31.5, B31.8 and B31.9) Interpretations ᭿ A39, A90, A112, B1, B2, B15, B18, B20, B30, B36, B56, B 73, B94, CSD, MH14, N45.2,. Sp -32 RA search online service of, Sp -33 specifications, Sp -3 Worldwide Standard Service of, Sp -32 American Standards Association, A -3 amines, C- 43, C-58 ammonia, C -33 , C-418, P-10 to P -31 , P-40. to P -31 , P-40 to P-57 antinutritive factors, E- 43 antioxidants, R-8 antistatic coatings, P -3 antisurge control/valves, C -35 9 to C -36 8 in turbocompressors, C -33 2 to C -33 5 API 610 CAP 8 type process