ADVANCES IN STEEL STRUCTURES Proceedings of The Second International Conference on Advances in Steel Structures 15-17 December 1999, Hong Kong, China Volume I ADVANCES IN STEEL STRUCTURES Proceedings of The Second International Conference on Advances in Steel Structures 15-17 December 1999, Hong Kong, China Volume I Elsevier Science Internet Homepage http://www.elsevier.nl (Europe) http://www.elsevier.com (America) http://www.elsevier.co.jp (Asia) Consult the Elsevier homepage for full catalogue information on all books, journals and electronic products and services. Elsevier Titles of Related Interest CHAN & TENG ICASS '96, Advances in Steel Structures (2 Volume Set) ISBN: 008-042830-4 MAKELAINEN ICSAS '99, Int Conf on Light-Weight Steel and Aluminium Structures ISBN: 008-0430147 SRIVASTAVA Structural Engineering World Wide 1998 (CD-ROM Proceedings with Printed Abstracts Volume, 702 papers) ISBN." 008-042845-2 OWENS Steel in Construction (CD-ROM Proceedings with Printed Abstracts Volume, 268 papers) ISBN: 008-042997-1 FUKUMOTO Structural Stability Design ISBN: 008-042263-2 USAMI & ITOH Stability and Ductility of Steel Structures ISBN: 008-043320-0 BJORHOVDE, COLSON & ZANDONINI Connections in Steel Structures III ISBN: 008-042821-5 FRANGOPOL, COROTIS & RACKWITZ Reliability and Optimization of Structural Systems ISBN: 008-042826-6 TANABE Comparative Performance of Seismic Design Codes for Concrete Structures ISBN." 008-043021-X Related Journals Free specimen copy gladly sent on request." Elsevier Science Ltd, The Boulevard, Langford Lane, Kidlington, Oxford, OX5 1GB, UK Advances in Engineering Software CAD Composite Structures Computer Methods in Applied Mechanics & Engineering Computers and Structures Construction and Building Materials Engineering Failure Analysis Engineering Fracture Mechanics To Contact the Publisher Engineering Structures Finite Elements in Analysis and Design International Journal of Solids and Structures International Journal of Fatigue Journal of Constructional Steel Research NDT & E International Structural Safety Thin-Walled Structures Elsevier Science welcomes enquiries concerning publishing proposals: books, journal special issues, conference proceedings, etc. All formats and media can be considered. Should you have a publishing proposal you wish to discuss, please contact, without obligation, the publisher responsible for Elsevier's civil and structural engineering publishing programme: Dr James Milne Publisher, Engineering and Technology Elsevier Science Ltd The Boulevard, Langford Lane Phone: +44 1865 843891 Kidlington, Oxford Fax: + 44 1865 843920 OX5 1GB, UK E.mail: j.milne@elsevier.co.uk General enquiries, including placing orders, should be directed to Elsevier's Regional Sales Offices - please access the Elsevier homepage for full contact details (homepage details at top of this page). ELSEVIER SCIENCE Ltd The Boulevard, Langford Lane Kidlington, Oxford OX5 1GB 9 1999 Elsevier Science Ltd. All rights reserved. The papers presented in these proceedings have been reproduced directly from the author's 'camera ready' manuscripts. As such the presentation and reproduction quality may vary from paper to paper. ADVANCES IN STEEL STRUCTURES Proceedings of The Second International Conference on Advances in Steel Structures 15-17 December 1999, Hong Kong, China Volume I Edited by SLChan and JGTeng The Hong Kong Polytechnic University Organised by Department of Civil and Structural Engineering The Hong Kong Polytechnic University Sponsored by The Hong Kong Institution of Engineers 1999 ELSEVIER AMSTERDAM 9 LAUSANNE 9 NEW YORK 9 OXFORD 9 SHANNON. SINGAPORE. TOKYO ELSEVIER SCIENCE Ltd The Boulevard, Langford Lane Kidlington, Oxford OX5 1GB, UK 9 1999 Elsevier Science Ltd. All rights reserved. The papers presented in these proceedings have been reproduced directly from the author's 'camera ready' manuscripts. As such the presentation and reproduction quality may vary from paper to paper. This work is protected under copyright by Elsevier Science, and the following terms and conditions apply to its use: Photocopying Single photocopies of single chapters may be made for personal use as allowed by national copyright laws. Permission of the Publisher and payment of a fee is required for all other photocopying, including multiple or systematic copying, copying for advertising or promotional purposes, resale, and all forms of document delivery. Special rates are available for educational institutions that wish to make photocopies for non-profit educational classroom use. Permissions may be sought directly from Elsevier Science Rights & Permissions Department, PO Box 800, Oxford OX5 1DX, UK; phone: (+44) 1865 843830, fax: (+44) 1865 853333, e-mail: permissions@elsevier co.uk. You may also contact Rights & Permissions directly through Elsevier's home page (http://www.else- vier.nl), selecting first 'Customer Support', then 'General Information', then 'Permissions Query Form'. In the USA, users may clear permissions and make payments through the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, USA; phone: (978) 7508400, fax: (978) 7504744, and in the UK through the Copyright Licensing Agency Rapid Clearance Service (CLARCS), 90 Tottenham Court Road, London W1P 0LP, UK; phone: (+44) 171 631 5555; fax: (+44) 171631 5500. Other countries may have a local reprographic rights agency for payments. Derivative Works Tables of contents may be reproduced for internal circulation, but permission of Elsevier Science is required for external resale or distribution of such material. Permission of the Publisher is required for all other derivative works, including compilations and translations. Electronic Storage or Usage Permission of the Publisher is required to store or use electronically any material contained in this work, including any chapter or part of a chapter. Except as outlined above, no part of this work may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of the Publisher. Address permissions requests to: Elsevier Science Rights & Permissions Department, at the mail, fax and e-mail addresses noted above. Notice No responsibility is assumed by the Publisher for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions or ideas contained in the material herein. Because of rapid advances in the medical sciences, in particular, independent verification of diagnoses and drug dosages should be made. First edition 1999 Library of Congress Cataloging in Publication Data A catalog record from the Library of Congress has been applied for British Library Cataloguing in Publication Data A catalogue record from the British Library has been applied for ISBN: 0 08 043015 5 The paper used in this publication meets the requirements of ANSI/NISO Z39.48-1992 (Permanence of Paper). Printed in the Netherlands. Preface These two volumes of proceedings contain 9 invited keynote papers and 126 contributed papers presented at the Second International Conference on Advances in Steel Structures held on 15-17 December 1999 in Hong Kong. The conference was a sequel to the International Conference on Advances in Steel Structures held in Hong Kong in December 1996. The conference provided a forum for discussion and dissemination by researchers and designers of recent advances in the analysis, behaviour, design and construction of steel structures. The papers presented at the conference cover a wide spectrum of topics and were contributed from over 15 countries around the world. They report the current state-of-the-art and point to future directions of structural steel research. The organization of a conference of this magnitude would not have been possible without the support and contributions of many individuals and organizations. The strong support from the Hong Kong Polytechnic University, Professor M. Anson, Dean of the FaTculty of Construction and Land Use, and Professor J.M. Ko, Head of the Department of Civil and Structural Engineering, has been pivotal in the organization of this conference. We also wish to express our gratitude to the Hong Kong Institution of Engineers for sponsoring the conference and the Local Advisory Committee for mobilizing support froTm the construction industry and government departments. Thanks are due to all the contributors for their careful preparation of the manuscripts and all the keynote speakers for their special support. Reviews of papers were carried out by members of the International Scientific Committee and the Local Organizing Committee. To all the reviewers, we are most grateful. We would also like to thank all those involved in the day-to-day running of the organization work, including members of the Local Organizing Committee and secretarial staff in the Department of Civil and Structural Engineering. Finally, we gratefully acknowledge our pleasant cooperation with Dr. J. Milne and Mrs R. Davies at Elsevier Science Ltd in the UK. S.L. Chan J.G. Teng This Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left BlankThis Page Intentionally Left Blank INTERNATIONAL SCIENTIFIC COMMITTEE H. Adeli, H. Akiyama, M. Anson, P. Ansourian, J. Arbocz, R. Bjorhovde, M.A. Bradford, R.Q. Bridge, C.R. Calladine, S.F. Chen, W.F. Chen, Y.K. Cheung, C.K. Choi, M. Chryssanthopoulos, A. Combescure, S.L. Dong, P.J. Dowling, M. Farshad, Y. Fukumoto, Y. Goto, P.L. Gould, R. Greiner, P. Grundy, G.J. Hancock, J.E. Harding, K.M. Hsiao, J.F. Jullien, S. Kato, S. Kitpornchai, V. Krupka, T.T. Lan, S.F. Li, R. Liew, Xila Liu, Xiliang Liu, L.W. Lu, Z.T. Lu, E. Lui, P. Marek, S. Morino, D.A. Nethercot, G.W. Owens, The Ohio State University University of Tokyo The Hong Kong Polytechnic University The University of Sydney Delft University of Technology University of Pittsburgh University of New South Wales University of Western Sydney University of Cambridge Xi'an University of Architecture and Technology Purdue University The University of Hong Kong Korea Advanced Institute of Science and Technology Imperial College Laboratoire de Mechanique et Technologie Zhejiang University University of Surrey EMPA Fukuyama University Nagoya Institute of Technology Washington University, St Louis Technisce Universitat, Graz Monash University University of Sydney University of Surrey National Chao Tung University INSA Lyon Toyohashi University of Technology University of Queensland Institute of Applied Mechanics, Vitkovice Chinese Academy of Building Research Tsinghua University National University of Singapore Tsinghua University Yianjin University Lehigh University South-East University Syracuse University Academy of Science of the Czech Republic Mie University University of Nottingham Steel Construction Institute USA Japan Hong Kong, China Australia Netherlands USA Australia Australia UK China USA Hong Kong, China Korea UK France China UK Switzerland Japan Japan USA Austria Australia Australia UK Taiwan, China France Japan Australia Czech Republic China China Singapore China China USA China USA Czech Republic Japan UK UK vii J.A. Packer, S. Pellegrino, E.P. Popov, J. Rhodes, J.M. Rotter, H. Schmidt, G. Sedlacek, S.Z. Shen, Z.Y. Shen, T.T. Soong, S.S. Sridharan, N.S. Trahair, T. Usami, A. Wada, F. Wald, E. Walicki, D. White, F. Williams, Y.B. Yang, R. Zandonini, S.T. Zhong, University of Toromo University of Cambridge University of California, Berkeley University of Strathclyde University of Edinburgh Universitat Essen RWTH Aachen Harbin University of Civil Engineering and Architecture Tongji University Suny, Buffalo, NY Washington University, St Louis University of Sydney Nagoya University Tokyo Institute of Technology Czech Technical University Technical University of Zielona Gora Georgia Institute of Technology University of Wales National Taiwan University University of Trento Harbin University of Civil Engineering and Architecture Canada UK USA UK UK Germany Germany China China USA USA Australia Japan Japan Czech Republic Poland USA UK Taiwan, China Italy China viii LOCAL ADVISORY COMMITTEE Chairman: Members: A.S. Beard F.S.Y. Bong A.K.C. Chan H.C. Chan Y.L. Choi W.K. Fung M. Harman I. Kimura M.H.C. Kwong C.K. Lau S.H. Ng W. Tang H. Wu J.M. Ko The Hong Kong Polytechnic University Mott MacDonald Hong Kong Ltd. Maunsell Consultants Asia Ltd. Ove Amp and Partners (HK) Ltd. The University of Hong Kong Buildings Department, HKSAR Government Architectural Services Department, HKSAR Government British Steel (Asia) Ltd. Nippon Steel Corporation Scott Wilson (Hong Kong) Ltd. Highways Department, HKSAR Government Hong Kong Housing Society The Hong Kong University of Science and Technology Kowloon Canton Railway Corporation ix . ADVANCES IN STEEL STRUCTURES Proceedings of The Second International Conference on Advances in Steel Structures 1 5 -1 7 December 19 99, Hong Kong, China Volume I ADVANCES IN STEEL STRUCTURES. ISBN: 00 8-0 4283 0-4 MAKELAINEN ICSAS '99, Int Conf on Light-Weight Steel and Aluminium Structures ISBN: 00 8-0 43 014 7 SRIVASTAVA Structural Engineering World Wide 19 98 (CD-ROM Proceedings. from paper to paper. ADVANCES IN STEEL STRUCTURES Proceedings of The Second International Conference on Advances in Steel Structures 1 5 -1 7 December 19 99, Hong Kong, China Volume I Edited