IEC 62841 3 10 2015/COR1 2016 – 1 – IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC 62841 3 10 Edition 1 0 2015 09 C O R R I G E N D U M 1 NOTE Rationale for this corrigendum The current lang[.]
IEC 62841-3-10:2015/COR1:2016 IEC 2016 –1– INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC 62841-3-10 Edition 1.0 2015-09 CORRIGENDUM NOTE Rationale for this corrigendum: The current language ("If the spindle end, the nut and the outer flange are not circular, they shall also be guarded.") may be interpreted to mean only when all three elements (spindle end, nut, outer flange) are not circular, then they shall be guarded However, the intention is to require guarding if any of the three elements is not circular The revised text removes this ambiguity 19 Mechanical hazards Replace the rd paragraph in 19.101.2.1 with the following: IEC 62841-3-10:2015-09/COR1:2016-07(en) If the spindle end, the nut or the outer flange are not circular, they shall also be guarded