Thịnh + trực slide phân tích và thiết kế kdk

10/2017 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com Drilling System ❖ Drilling Technologies 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com Drilling System ❖ Drilling Technologies 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com Types of Rigs Drilling Rigs ✓ A drilling rig is a device used to drill, case and cement oil and gas wells ✓ The correct procedure for selecting and sizing a drilling rig is as follows: ➢ Design the well ➢ Establish the various loads to be expected during drilling and testing operations and use the highest loads This point establishes the DEPTH RATING OF THE RIG ➢ Compare the rating of existing rigs with the design loads ➢ Select the appropriate rig and its components 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com Types of Rigs Rig Classification 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com Types of Rigs Onshore: Mobile Rigs 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com Types of Rigs Offshore: Bottom Supported Platform Rigs 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com Types of Rigs Offshore: Other Bottom Supported Platform Rigs 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com Types of Rigs Offshore: Floating Rigs 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com Types of Rigs Comparison of drilling rigs 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 10 The Block & Tackle 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 55 Hook Loads 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 56 Hook Loads 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 57 Load Applied to The Derrick 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 58 HOISTING DESIGN CONSIDERATIONS 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 59 The total load applied to the derrick 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 60 static derrick loading (SDL) and wind load 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 61 Derrick floor plan 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 62 the load in each leg 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 63 The equivalent derrick load andThe derrick efficiency factor 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 64 derrick load 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 65 derrick load 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 66 TON-MILES OF A DRILLING LINE 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 67 Evaluation Of Total Service And Cut-off Practice 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 68 References (CDF) Jorge H.B Sampaio Jr “Drilling Engineering Fundamentals.” Master of Petroleum Engineering Curtin University of Technology, 2007 Chapter 2 (WEC) Rabia, Hussain Well Engineering & Construction Entrac Consulting Limited, 2002 Chapter 16 01/2018 Đinh Công Vĩnh Luân – MSc in Offshore Engineering Email: luandcv@gmail.com 69