Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống
1
/ 51 trang
THÔNG TIN TÀI LIỆU
Nội dung
172 Emulsifying Agents MAYCO OIL & CHEMICAL CO.: EMULAMID Lubricant-Emulsifiers: EMULAMID AD-50 Lubricant-Emulsifier: Typical Inspections: Specific gravity, 60/60F: 0.989 Weight, lbs./gallon @ 60F: 8.24 Alkalinity as KOH, 1% solution (methyl orange indicator): 0.24 pH, 10% solution: 10.0 Free fatty acids, %: 3.0 Surface tension, % solution: 28.5 Appearance: clear, brown semi-gel Appearance, 10% solution in water: hazy, light brown liquid EMULAMID AD-50 is a fatty diethanol amide that functions as a lubricant, emulsifier and rust inhibitor additive in water soluble cutting and grinding fluids and stamping, drawing and forging compounds This is a biodegradable additive that offers unique solubility characteristics in both water and oil This is a biodegradable additive that offers unique solubility character istics in both water and oil Emulsifiable oils may be compounded with a reduced amount of emulsifier when EMULAMID AD-50 is added and still benefit from increased lubricity and a thicker, richer consistency By adding a small amount of water to soluble oils containing EMULAMID AD-50, it is possible to form a stable thixotropic gel that will suspend insoluble solids such as powdered graphite EMULAMID TO-21 Lubricant-Emulsifier: Typical Properties: Free Alkanolamine (as DEA): 25 Acid Number: 15 Free Fatty Acid (as Oleic): 7.5 pH, 10% Solution: 10.0 Specific Gravity 60/60F: 0.991 Weight, Pounds/gallon at 60F: 8.25 Appearance: Amber Liquid EMULAMID TO-21 is a Tall Oil fatty amide designed for use in most water extendable metalworking coolant formulations The addition of 5% to 20% EMULAMID TO-21 not only functions as a secondary emulsifier but also imparts corrosion protection, added lubricity and metal wetting to soluble oil, semi-synthetic and synthetic formulations When used in Synthetic and Semi-synthetic coolants, EMULAMID TO-21 can serve as a primary or secondary emulsifier, while also improving boundary lubrication, wetting action, cooling capabilities and corrosion protection of the fluid Mayco Oil & Chemical Co MAYCO OIL & CHEMICAL CO.: 173 MAYSOL Emulsifier Bases: MAYSOL 410 Emulsifier Bases: Typical Inspections: Specific gravity, 60/60F: 0.989 Weight, lbs./gal at 60F: 8.24 Flash, COC, F: 350 Fire, COC, F: 370 pH(18% in naphthenic oil, mixed with water at 20:l rati0):g.O Appearance and consistency: heavy, clear, brown oil MAYSOL 410 Emulsifier Base is an economically priced emulsifier concentrate for the formulator who demands maximum emulsion stability at the lowest possible price MAYSOL 410 utilizes three distinctly different types of emulsifier in a synergistic combination that imparts excellent soluble oil mix stability in both hard and soft waters Natural foam inhibitors allow for efficient wetting action with optimum foam control Rust control is provided by a semi-polar rust inhibitor system that assures the protection of your customers' valuable machine tools MAYSOL 767 & 812: For naphthenic oils (hydro-treated and/or solvent extracted) and paraffinic oils Typical Properties: MAYSOL 767: Specific Gravity 60/60F: 1.006 Wt lbs./gallon @ 60F: 8.4 Free Fatty Acid (as Oleic): 19-20 Total Alkalinity (as KOH): 2.9 MAYSOL 812: Specific Gravity 60/60F: 1.006 Wt lbs./gallon @ 60F: 8.4 Free Fatty Acid (as Oleic): 19-20 Total Alkalinity (as KOH): 2.9 These two emulsifier bases were developed for use in the new hydro-treated and/or solvent extracted naphthenic base oils Blends of 15% emulsifier base and 85% base oil will yield stable, non-skinning soluble oils that are not only stable under a wide range of temperatures (including freeze thaw tests), but also of any heavy metals, phenols, nitrites, etc MAYSOL 767 and MAYSOL 812 can be used as emulsifier bases for paraffinic base oils if oleic acid or tall oil fatty acid (0.5 to 1.0%) is added to the base o i l 174 Emulsifying Agents MAZER CHEMICALS: AVANEL S Surfactants: Typical Properties of AVANEL AVANEL S Surfactants: S: 30: Average Molecular Weight: 420 % Solids: 34-36 Appearance: White Paste Color, APHA: < l o Specific Gravity @ 25C: 1.06 Viscosity, cps @ 25C: 360 pH: 6.8-7.6 Flash Point, F: 130 Solidification Point, C: 25 70 : Average Molecular Weight: 600 % Solids: 34-36 Appearance: Clear Liquid Color, APHA: 20 Ionic Nature: Anionic Viscosity @ 25C: 0 cps SYN FAC TEA-97: SYN FAC TEA-97 is an ethoxylated amine used as a solvent and/ or dispersant for acidic materials It is especially recommended for use in the dye industry for solubilizing and dyes, pigments and optical brighteners Advantages: * Plant proven * Applicable with wide range of pigments * Economical to use General Characteristics: Acid Number: 22 Color (Gardner) : < Hydroxyl Number: pH ( % of solution): 8.4 Specific Gravity at 25C: Viscosity at 25C: 400 cps Water Content: