Microsoft Word C045025e doc ICS 17 140 20; 53 100 Ref No ISO 6396 2008/Cor 1 2009(E) © ISO 2009 – All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO 6396 2008 TECHNICAL CORRIGENDU[.]
INTERNATIONAL STANDARD ISO 6396:2008 TECHNICAL CORRIGENDUM Published 2009-05-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION Earth-moving machinery — Determination of emission sound pressure level at operator’s position — Dynamic test conditions TECHNICAL CORRIGENDUM Engins de terrassement — Détermination du niveau de pression acoustique d'émission au poste de conduite — Conditions d'essai dynamique RECTIFICATIF TECHNIQUE Technical Corrigendum to International Standard ISO 6396:2008 was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee SC 2, Safety, ergonomics and general requirements, in collaboration with ISO/TC 43, Acoustics, Subcommittee SC 1, Noise Page 1, Clause Date the reference to ISO 11201 so that it becomes “ISO 11201:—1)” Page 4, 8.1 Replace the first paragraph of the subclause with the following, reflecting a revision of accuracy grades as specified in ISO 11201 for the measurement of emission sound pressure levels: “The time-averaged A-weighted emission sound pressure level at the operator's position shall be determined in accordance with ISO 11201:—, accuracy grade 2.” “1) To be published (Revision of ISO 11201:1995)” ICS 17.140.20; 53.100 © ISO 2009 – All rights reserved Published in Switzerland Ref No ISO 6396:2008/Cor.1:2009(E)