E POWER BUILDING ENGINEERING COMPANY LIMITED Head office: 12th Floor, Block B, Song Da Building Pham Hung My Dinh I, Nam Tu Liem Hanoi Branch: 235 Nguyen Mau Tai Hoa Xuan Cam Le Da Nang Factory: Lot 49 + 50, DT 446 road (Bai Nai Vai Reo), Phu Cat, Quoc Oai, Hanoi
+84 964 284 422 / +84 24 626 02761 Marketing@epower.com.vn www.epower.com.vn E - POWER BUILDING ENGINEERING COMPANY LIMITED Head office: 12th Floor, Block B, Song Da Building - Pham Hung - My Dinh I, - Nam Tu Liem - Hanoi Branch: 235 Nguyen Mau Tai - Hoa Xuan - Cam Le - Da Nang Factory: Lot 49 + 50, DT 446 road (Bai Nai - Vai Reo), Phu Cat, Quoc Oai, Hanoi LIST OF PRODUCTS • • • • ROOF SYSTEM Kalzip/EuroZip (High) Aluminum Roof Lowseam, FlatZip (Low) Aluminum roof Polycarbonate light roof Skylight glass roof, Sky Roof GLASS SYSTEM • • Glass edge Glass door OTHERS FACADE SYSTEM • • • • Solid aluminum panels Alubond USA panels Perforated aluminum panels Decorative Louver • • Anti-slip system on the roof Roof door STRUCTURE OF E-POWER LOWSEAM Aluminum alloy sheet coated with PVDF The stainless steel anchor bar is designed to allow the roof sheet to expand freely Connection Z bar Mineral wool sound and heat insulation Moisture-proof membrane Deck floor, bottom layer directly linked with purlins 25/38 mm Open joints can be zipped once or twice, depending on the requirements of the design and architecture Joints can be applied to both straight, curved or winding roof/ceiling panels EPOWER LOWSEAM – PERFECT CHOICES FOR THE ATTIC Epower Lowseam aluminum roof system is manufactured on modern production lines with strict quality control process, ensuring quality in accordance with European standards With buildings with European, modern architecture, villas, row houses with high technical requirements, noise resistance, heat resistance but still must ensure aesthetics, Epower Lowseam is considered the most correct choice to complete roof system, facade system of the building The E-Power Lowseam roof/ceiling system has a durability of up to 50 years, is optimally designed with a compressive load of 2.7 kg/m2 while the weight of the roof is only 2.2kg.m2 In addition to the material is aluminum alloy sheet coated with PVDF (colors according to the international RAL color table), the first layer of the Lowseam roof/ceiling system can also use copper, titanium, steel, zinc-coated aluminum .in accordance with the requirements of architects, customers SUPERIOR ADVANTAGES E-Power Lowseam adapts to increasingly negative changes in global climate (extremely hot in summer and immensely cold in winter) Safe during use, 100% guaranteed not to leak, unroofed, drop materials or structures causing accidents Creating added values for users, such as easy installation of solar panels, safety systems on the roof without affecting the structure or aesthetics E-Power Lowseam is designed and manufactured by E-Power - a trusted, fully certified supplier Total cost for the project is LOWER than when using a tiled concrete roof, because the roof structure is very light (weight