Tài liệu học tập fds

501-14-1 Handles, Locks, Latches and Entry Systems 501-14-1 SECTION 501-14 Handles, Locks, Latches and Entry Systems VEHICLE APPLICATION: 2011.50 Ranger CONTENTS PAGE DESCRIPTION AND OPERATION Handles, Locks, Latches and Entry Systems 501-14-2 GENERAL PROCEDURES Remote Keyless Entry (RKE) Transmitter Programming 501-14-7 REMOVAL AND INSTALLATION Ignition Lock Cylinder Front Door Latch Rear Door Latch — Double Cab Rear Door Latch — Super Cab Exterior Front Door Handle Exterior Rear Door Handle Hood Latch Tailgate Release Handle Tailgate Latch 501-14-8 501-14-9 501-14-11 501-14-13 501-14-15 501-14-16 501-14-17 501-14-19 501-14-20 DISASSEMBLY AND ASSEMBLY Door Lock Cylinder 501-14-21 Handles, Locks, Latches and Entry Systems 501-14-2 501-14-2 DESCRIPTION AND OPERATION Handles, Locks, Latches and Entry Systems Vehicles with RKE (remote keyless entry) single cab Item Description Item Description Hood latch release handle Door latch Steering column ignition cylinder Interior door handle Door lock cylinder 10 Exterior door handle Mechanical key with transmitter (radio frequency remote control) Tailgate handle 11 Hood latch Tailgate release handle Tailgate latch 2011.50 Ranger Vehicles with RKE (remote keyless entry) double cab G1271584en Handles, Locks, Latches and Entry Systems 501-14-3 501-14-3 DESCRIPTION AND OPERATION Item Description Item Description Hood latch Rear door latch Hood latch release handle 10 Rear exterior door handle Steering column ignition cylinder 11 Door lock cylinder Mechanical key with transmitter (radio frequency remote control) Front exterior door handle 12 Rear interior door handle Tailgate handle 13 Front door latch Tailgate release handle 14 Front interior door handle Tailgate latch 2011.50 Ranger Vehicles with RKE (remote keyless entry) super cab G1271584en Handles, Locks, Latches and Entry Systems 501-14-4 501-14-4 DESCRIPTION AND OPERATION Item Description Item Description Hood latch 10 Rear door interior handle Hood latch release handle 11 Rear door lower latch Steering column ignition cylinder 12 Rear interior door handle Door lock cylinder 13 Front interior door latch Front exterior door handle 14 Tailgate handle Mechanical key with transmitter (radio frequency remote control) Tailgate release handle General Tailgate latch Rear door upper latch When one of the buttons on the remote control is pressed, a coded HF radio signal is sent from the transmitter in the mechanical key This signal is 2011.50 Ranger G1271584en 501-14-5 Handles, Locks, Latches and Entry Systems 501-14-5 DESCRIPTION AND OPERATION received by the RF receiver located in the BCM (body control module), which decodes the signal If the coded signal is valid, the BCM will operate the latches Unlocking is confirmed by one long flash of the turn signal lamps, when the unlocking is completed There are various circumstances in which remote unlocking is not possible: • The radio transmitter or receiver is overloaded because of radio interference The door latches have electric motors to operate the locking and double locking function The electric motors are actuated directly by the BCM When the door latch is locked, the exterior door handle is disengaged from the door latch A control switch is incorporated in the door latch in the driver's door This control switch monitors the position of the door latch and reports the information to the BCM This information is sent to the BCM for use in warning systems, locking functions and anti-theft alarm systems • The key (electronics) is damaged • The battery in the key is discharged • The overload protection of the door latches is active (after too many operations) As well as remote keyless entry, the vehicle can be locked and unlocked using the lock cylinder in the driver's door If RKE is not fitted, the vehicle can also been unlocked using the lock cylinder in the passenger's door The lock cylinder is mechanically connected to a switch, which is linked to the BCM Double Locking The double locking system has the same functionality of central locking but also prevents the doors from being opened from inside using the interior door handles The double locking function is actuated if one of the following conditions is satisfied: • A key is inserted into a door cylinder lock and turned to the "locking" position twice within seconds • The locking button on the remote transmitter is pressed twice within seconds Confirmation that the vehicle is double locked is also given by two short flashes of the turn signal lamps, when the double locking process is completed The ordinary central locking in this case will be signaled by a single short flash of the turn signal lamps Door latch for double cab The front door entry system contains a latch that is fastened to the inside of the door frame and is controlled by the exterior and interior door handles The latch contains the door ajar switch and door lock actuator The front doors are locked/unlocked by the Remote Keyless Entry (RKE) transmitter, lock/unlock button inside the vehicle or the driver door lock cylinder The rear door entry system contains a latch that is fastened to the inside of the door frame and is controlled by the exterior and interior door handles The latch contains the door ajar switch and door lock actuator The rear doors can be locked/unlocked by the RKE transmitter, lock/unlock button inside the vehicle The rear doors have a child safety lock feature, which is a manual lock on the inside of the rear door frame When the child safety feature is on, the rear doors cannot be opened from the interior door handle The door latches have electric motors to operate the locking and double locking function The electric motors are actuated directly by the BCM When the door latch is locked, the exterior door handle is disengaged from the door latch A control switch is incorporated in the driver's door latch This control switch monitors the position of the door latch and reports the information to the BCM This information is sent to the BCM for use in warning systems, locking functions and anti-theft alarm systems Door latch for single cab The front door entry system contains a latch that is fastened to the inside of the door frame and is controlled by the exterior and interior door handles The latch contains the door ajar switch and door lock actuator The front doors are locked/unlocked by the Remote Keyless Entry (RKE) transmitter, lock/unlock button inside the vehicle or the driver door lock cylinder 2011.50 Ranger Door latch for super cab The front door entry system contains a latch that is fastened to the inside of the door frame and is controlled by the exterior and interior door handles The latch contains the door ajar switch and door lock actuator The front doors are locked/unlocked by the Remote Keyless Entry (RKE) transmitter, lock/unlock button inside the vehicle or the driver door lock cylinder G1271584en 501-14-6 Handles, Locks, Latches and Entry Systems 501-14-6 DESCRIPTION AND OPERATION The front door latches have electric motors to operate the locking and double locking function The electric motors are actuated directly by the BCM When the front door latch is locked, the exterior door handle is disengaged from the door latch A control switch is incorporated in the driver's door latch This control switch monitors the position of the door latch and reports the information to the BCM This information is sent to the BCM for use in warning systems, locking functions and anti-theft alarm systems The rear door entry system contains a latch that is fastened to the inside of the door frame and is controlled by the exterior and interior door handles The latch contains the door ajar switch No lock actuators or mechanisms are fitted to the rear doors, as the front door must be open in order to access the rear door latch Tailgate latch The lock cylinder is optional If equipped, the tailgate release handle is integrated with a lock cylinder The tailgate is not linked to the central locking system Hood Latch The hood latch system contains a latch fastened to the body and a hood latch striker attached to the hood The latch is controlled by the hood latch release handle and cable 2011.50 Ranger G1271584en 501-14-7 Handles, Locks, Latches and Entry Systems 501-14-7 GENERAL PROCEDURES Remote Keyless Entry (RKE) Transmitter Programming Programming To programme new remote controls turn the ignition key to position II four times within six seconds Turn the ignition to position A tone sounds to indicate that it is now possible to programme the remote controls for ten seconds Press any button on a new remote control A tone will sound as confirmation Repeat this last step for all your remote controls, including your original Do not remove the key from the ignition when pressing the button on this remote control Switch the ignition back on (position II) or wait for ten seconds without programming another remote control to end the key programming Only the remote controls which you have just programmed are now able to lock and unlock the vehicle 2011.50 Ranger G1272329en 501-14-8 Handles, Locks, Latches and Entry Systems 501-14-8 REMOVAL AND INSTALLATION Ignition Lock Cylinder General Equipment Punch Removal NOTE: Removal steps in this procedure may contain installation details Refer to: Passive Anti-Theft System (PATS) Transceiver (419-01 Anti-Theft - Passive, Removal and Installation) Turn the ignition key to position I Using a suitable punch, release the locking tang General Equipment: Punch Installation CAUTION: Make sure that the ignition switch and the ignition lock cylinder are aligned before installation To install, reverse the removal procedure 2011.50 Ranger G1271591en 501-14-9 Handles, Locks, Latches and Entry Systems 501-14-9 REMOVAL AND INSTALLATION Front Door Latch Removal NOTE: Removal steps in this procedure may contain installation details Torque: 10 Nm NOTE: Make sure that door window glass remains in the close position Refer to: Exterior Front Door Handle (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation) Refer to: Front Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation) CAUTION: Do not touch the adhesive surface as re-bonding will be impaired 2011.50 Ranger G1271592en 501-14-10 Handles, Locks, Latches and Entry Systems 501-14-10 REMOVAL AND INSTALLATION 10 Torque: 12 Nm 11 Installation To install, reverse the removal procedure 2011.50 Ranger G1271592en 501-14-11 Handles, Locks, Latches and Entry Systems 501-14-11 REMOVAL AND INSTALLATION Rear Door Latch — Double Cab Removal NOTE: Removal steps in this procedure may contain installation details Refer to: Exterior Rear Door Handle (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation) Refer to: Rear Door Trim Panel - Double Cab (501-05 Interior Trim and Ornamentation, Removal and Installation) Torque: 12 Nm 2011.50 Ranger G1271593en 501-14-12 Handles, Locks, Latches and Entry Systems 501-14-12 REMOVAL AND INSTALLATION Installation To install, reverse the removal procedure 2011.50 Ranger G1271593en 501-14-13 Handles, Locks, Latches and Entry Systems 501-14-13 REMOVAL AND INSTALLATION Rear Door Latch — Super Cab Removal NOTE: Removal steps in this procedure may contain installation details Torque: 10 Nm Refer to: Rear Door Trim Panel - Super Cab (501-05 Interior Trim and Ornamentation, Removal and Installation) 2011.50 Ranger G1272935en 501-14-14 Handles, Locks, Latches and Entry Systems 501-14-14 REMOVAL AND INSTALLATION Torque: 12 Nm Installation To install, reverse the removal procedure 2011.50 Ranger G1272935en 501-14-15 Handles, Locks, Latches and Entry Systems 501-14-15 REMOVAL AND INSTALLATION Exterior Front Door Handle Removal NOTE: Removal steps in this procedure may contain installation details NOTE: Use suitable tool to remove the cover Installation To install, reverse the removal procedure 2011.50 Ranger G1271594en 501-14-16 Handles, Locks, Latches and Entry Systems 501-14-16 REMOVAL AND INSTALLATION Exterior Rear Door Handle Removal NOTE: Removal steps in this procedure may contain installation details NOTE: Use suitable tool to remove the cover Installation To install, reverse the removal procedure 2011.50 Ranger G1271595en 501-14-17 Handles, Locks, Latches and Entry Systems 501-14-17 REMOVAL AND INSTALLATION Hood Latch Removal NOTE: Removal steps in this procedure may contain installation details NOTE: Mark the position of the hood latch prior to removing the hood latch bolts to aid positioning during installation 3 If equipped Torque: 11 Nm 2011.50 Ranger G1272937en 501-14-18 Handles, Locks, Latches and Entry Systems 501-14-18 REMOVAL AND INSTALLATION Installation CAUTION: Make sure that the clearance on either side of the hood is equal and no strain is placed on the hood latch NOTE: Check the latch adjustment to make sure the latch was installed and aligned correctly To install, reverse the removal procedure 2011.50 Ranger G1272937en 501-14-19 Handles, Locks, Latches and Entry Systems 501-14-19 REMOVAL AND INSTALLATION Tailgate Release Handle Removal NOTE: Removal steps in this procedure may contain installation details Torque: Nm Installation To install, reverse the removal procedure 2011.50 Ranger G1295757en 501-14-20 Handles, Locks, Latches and Entry Systems 501-14-20 REMOVAL AND INSTALLATION Tailgate Latch Removal NOTE: Removal steps in this procedure may contain installation details Torque: 25 Nm Installation To install, reverse the removal procedure 2011.50 Ranger G1295758en