2020 VTO AMR Oral Schedule 5.18.20_0

Tuesday, June 2, Oral Presentations Time 10:00 AM Advanced Combustion Engines (ACE) Technology Integration (TI) ACE138: Partnership for Advanced Combustion Engines (PACE) - A LightDuty National Laboratory Combustion Consortium Paul Miles, SNL TI920: Technology Integration (TI) Project Overview Mark Smith, DOE 5/18/20 10:15 AM 10:30 AM ACE139: Development of an Optimized Gasoline Surrogate Formulation for TI091: Solutions for Curbside-Charging Electric Vehicles Planned for Urban PACE Experiments and Simulations Growth Scott Wagnon, LLNL Robert Cox, University of North Carolina at Charlotte 10:45 AM 11:00 AM ACE140: Improved Chemical Kinetics and Algorithms for More Accurate, Faster Simulations Russell Whitesides, LLNL TI092: Vehicle Charging Innovations for Multi-Unit Dwellings (VCI-MUD) Kevin Wood, Center for Sustainable Energy ACE141: Advanced Ignition System Fundamentals Isaac Ekoto, SNL TI093: Electric Vehicle Supply Equipment (EVSE) Innovation: Streetlight Charging in City Right-Of-Way Miriam Bouallegue, Metropolitan Energy Center ACE142: Development and Validation of Simulation Tools for Advanced Ignition Systems Riccardo Scarcelli, ANL TI094: Advanced Transportation Hub Efficiency using Novel Analysis (ATHENA) Caleb Phillips, NREL Lunch Break Lunch Break ACE143: Fuel Injection and Spray Research Chris Powell, ANL TI095: High-Performance Computing (HPC) for O'Hare Hub Aymeric Rousseau, ANL ACE144: Spray Wall Interactions and Soot Formation Lyle Pickett, SNL TI096: Technology Integration to Gain Commercial Efficiency for the Urban Goods Delivery System Anne Goodchild, University of Washington ACE146: Direct Numerical Simulation (DNS) and High-Fidelity Large-Eddy Simulation (LES) for Improved Prediction of In-Cylinder Flow and Combustion Processes Muhsin Ameen, ANL TI097: Drones, Delivery Robots, Driverless Cars, and Intelligent Curbs for Increasing Energy Productivity of First-/Last-Mile Goods Movement Agreement Constantine Samaras, Carnegie Mellon University 11:15 AM 11:30 AM 11:45 AM 12:00 PM 12:15 PM 12:30 PM 1:00 PM 1:15 PM 1:30 PM 1:45 PM 2:00 PM 2:15 PM 5/18/20 Tuesday, June 2, Oral Presentations Time Advanced Combustion Engines (ACE) Technology Integration (TI) 2:30 PM Break Break ACE147: Mitigation of Knock and Low-Speed Pre-Ignition (LSPI) for HighPower Density Engines Jim Szybist, ORNL TI098: Transportation Energy Analytics Dashboard (TEAD) Mark Franz, University of Maryland ACE148: Overcoming Barriers for Dilute Combustion Brian Kaul, ORNL TI099: Understanding and Improving Energy Efficiency of Regional Mobility Systems by Leveraging System-Level Data Zhen (Sean) Qian, Carnegie Mellon University ACE149: Cold-Start Physics and Chemistry in Combustion Systems for Emissions Reduction Scott Curran, ORNL TI100: High-Dimensional, Data-Driven Energy Optimization for Multi-Modal Transit Agencies Philip Pugliese, Chattanooga Area Regional Transit Authority Break Break ACE145: More Accurate Modeling of Heat Transfer in Internal Combustion Engines K Dean Edwards, ORNL TI101: Mobility and Energy Improvements Realized through PredictionBased Vehicle Powertrain Control and Traffic Management Thomas Bradley, Colorado State University 3:00 PM 3:15 PM 3:30 PM 3:45 PM 4:00 PM 4:15 PM 4:30 PM 5:00 PM 5:15 PM ACE150: Enabling Low-Temperature Plasma (LTP) Ignition Technologies for Multi-Mode Engines through the Development of a Validated High-Fidelity 5:30 PM LTP Model for Predictive Simulation Tools Nick Tsolas, Auburn University 5:45 PM ACE151: Hierarchically Informed Engineering Models for Predictive Modeling of Turbulent Premixed Flame Propagation in Pre-Chamber Turbulent Jet Ignition Haifend Wang, Purdue University 6:00 PM ACE152: Development of High-Fidelity and Efficient Modeling Capabilities for Enabling Co-Optimization of Fuels and Multi-Mode Engines Matthiaas Ihme, Stanford University TI102: Advancing Platooning with Advanced Driver-Assistance Systems Control Integration and Assessment Hoseinali Borhan, Cummins TI103: Fuel-Efficient Platooning in Mixed Traffic Highway Environments Jeff Rupp, American Center for Mobility 6:15 PM 6:30 PM 6:45 PM Tuesday, June 2, Oral Presentations Time Advanced Combustion Engines (ACE) Technology Integration (TI) 5/18/20 Tuesday, June 2, Oral Presentations Time Vehicle Technologies Analysis (VAN) 5/18/20 Electrification Technologies (ELT) 10:00 AM 10:15 AM 10:30 AM ELT089: Assessing the North American Supply Chain for Traction-Drive Inverters, Motors, and Batteries for Class 3-8 Hybrid Electric and Plug-In Electric Commercial Vehicles Chris Whaling, Synthesis Partners 10:45 AM 11:00 AM ELT208: Highly Integrated Power Module Emre Gurpinar, ORNL 11:15 AM 11:30 AM ELT209: High-Voltage, High-Power Density Traction-Drive Inverter Gui-Jia Su, ORNL 11:45 AM 12:00 PM ELT210: Development of Next-Generation Vertical Gallium-Nitride Devices for High-Power Density Electric Drivetrain Greg Pickrell, SNL 12:15 PM 12:30 PM Lunch Break Lunch Break 1:00 PM ELT211: Power Electronics Thermal Management Gilbert Moreno, NREL 1:15 PM 1:30 PM ELT212: Non-Heavy Rare-Earth High-Speed Motors Tsarafidy Raminosoa, ORNL 1:45 PM 2:00 PM ELT213: High-Fidelity Multiphysics Material Models for Electric Motors Jason Pries, ORNL 2:15 PM 5/18/20 Tuesday, June 2, Oral Presentations Time Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT) 2:30 PM Break Break VAN920: Overview of VTO Analysis Program Jacob Ward, DOE ELT214: Electric Motor Thermal Management Kevin Bennion, NREL VAN016: Transportation Data Program Stacy Davis, ORNL ELT215: Permanent Magnets without Critical Rare Earths to Enable Electric Drive Motors with Exceptional Power Density Iver Anderson, Ames Laboratory VAN017: ANL VTO Analysis Modeling Program Michael Wang, ANL ELT216: Isotropic, Bottom-Up Soft Magnetic Composites for Rotating Machines Todd Monson, SNL Break Break 3:00 PM 3:15 PM 3:30 PM 3:45 PM 4:00 PM 4:15 PM 4:30 PM 5:00 PM VAN023: Assessing Energy and Cost Impact of Advanced Vehicle Technologies Ram Vijayagopal, ANL 5:15 PM 5:30 PM VAN018: Light-Duty Vehicle Choice Modeling and Benefits Analysis Aaron Brooker, NREL 5:45 PM 6:00 PM VAN032: Tracking the Evolution of Electric Vehicles and New Mobility Technology Joann (Yan) Zhou, ANL VAN033: Transportation Macroeconomic Accounting Models: VISION and Non-Light Duty Energy and Greenhouse Gas (GHG) Emissions Accounting 6:15 PM Tool (NEAT) Joann (Yan) Zhou, ANL 6:30 PM 6:45 PM Tuesday, June 2, Oral Presentations Time Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT) 5/18/20 5/18/20 Tuesday, June 2, Oral Presentations Time 10:00 AM 10:15 AM 10:30 AM Materials Technology (MAT) Battery R&D (BAT) MAT127: U.S Automotive Materials Partnership Low-Cost Magnesium Sheet Component Development and Demonstration Project Randy Gerken, Fiat Chrysler Automotive BAT343: Silicon and Intermetallic Anode Portfolio Strategy Overview Brian Cunningham, DOE MAT149: Non-Rare Earth Magnesium Bumper Beams Scott Whalen, PNNL BAT436: Silicon Electrolyte Interface Stabilization (SEISTA): Update and Overview Tony Burrell, NREL Energy-Efficient Mobility Systems (EEMS) EEMS013: ANL Core Tools Simulation Phil Sharer, ANL EEMS041: ANL Core Tools Hardware Kevin Stutenberg, ANL 10:45 AM 11:00 AM 11:15 AM 11:30 AM 11:45 AM 12:00 PM MAT166: Aluminum Purification and Magnesium Recovery from Magnesium-Aluminum Scrap EEMS067: Virtual and Physical Proving Ground for BAT437: Silicon Electrolyte Interface Stabilization John Hryn, ANL Development and Validation of Future Mobility (SEISTA): Electrochemical Methods Technologies Robert Kostecki, LBNL Dean Deter, ORNL MAT150: Low-Cost Corrosion Protection for Magnesium Aashish Rohatgi, PNNL MAT158: Overcoming the Barriers to Lightweighting by Enabling Low-Cost and HighPerformance Structural Automotive Aluminum Castings Aashish Rohatgi, PNNL 12:15 PM 12:30 PM 1:00 PM Lunch Break BAT438: Silicon Electrolyte Interface Stabilization (SEISTA): Advanced Characterization Glen Teeter, NREL EEMS066: Livewire Data Platform A Solution for Energy Efficient Mobility Systems (EEMS) Data Sharing Lauren Spath Luhring, NREL Silicon Electrolyte Interface Stabilization (SEISTA): Roundtable - Question & Answer EEMS069: Next-Generation Intelligent Traffic Signal for Multimodal, Shared, and Automated Future Andrew Powch, Xtelligent Lunch Break Lunch Break MAT126: Room-Temperature Stamping of HighStrength Aluminum Alloys Aashish Rohatgi, PNNL EEMS061: Real-Time Data and Simulation for BAT388: Silicon Deep Dive: Update and Overview Optimizing Regional Mobility in the United States Jack Vaughey, ANL Jibonananda Sanyal, ORNL MAT142: Metal-Matrix Composite Brakes Using Titanium Diboride Glenn Grant, PNNL BAT439: Silicon Deep Dive: Silicon-Based Slurries and Electrodes Beth Armstrong, ORNL EEMS037: High-Performance Computing (HPC) and Big Data Solutions for Mobility Design and Planning Jane MacFarlane, LBNL MAT134: Assembly of Dissimilar Aluminum Alloys for Automotive Applications Piyush Upadhyay, PNNL BAT440: Silicon Deep Dive: Silicon Functionalization Zhengcheng Zhang, ANL EEMS062: Deep-Learning for Connected and Automated Vehicle (CAV) Development Robert Patton, ORNL 1:15 PM 1:30 PM 1:45 PM 2:00 PM 2:15 PM 5/18/20 Tuesday, June 2, Oral Presentations Time Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS) 2:30 PM Break Break Break 3:00 PM MAT151: Phase-Field Modeling of Corrosion for Design of Next-Generation Magnesium-Aluminum Vehicle Joints Adam Powell, Worcester Polytechnic Institute Silicon Deep Dive: Roundtable - Question & Answer EEMS028: Developing an Eco-Cooperative Automated Control System (Eco-CAC) Hesham Rakha, Virginia Tech BAT386: Extreme Fast Charge Cell Evaluation of Lithium-Ion (XCEL) Batteries Venkat Srinivasan, ANL EEMS082: Validation of Connected and Automated Mobility System Modeling and Simulation Jeffrey Rupp, American Center for Mobility 3:15 PM 3:30 PM MAT139: Mechanical Joining of Thermoplastic Carbon-Fiber Reinforced Polymer to Die-Cast Magnesium 3:45 PM Keerti Kappagantula, PNNL; Yong Chae Lim, ORNL 4:00 PM EEMS083: CIRCLES:Congestion Impact Reduction MAT138: Solid-State Joining of Magnesium Sheet BAT392: Enabling Rapid Charging in Lithium-Ion via CAV-in-the-loop Lagrangian Energy Smoothing to High-Strength Steel Batteries via Integrated Acoustofluidics Alexandre Bayen, University of California at Piyush Upadhyay, PNNL; Zhili Feng, ORNL James Friend, University of California at San Diego Berkeley 4:15 PM 4:30 PM 5:00 PM Break Break Break MAT167: Corrosion Mechanisms in MagnesiumSteel Dissimilar Joints Vineet Joshi, PNNL; Donovan Leonard, ORNL BAT393: Development of an Extreme FastCharging Battery Chao-Yang Wang, Penn State University EEMS084: Energy-Efficient Maneuvering of connected and Automated Vehicles (CAVs) with Situational Awareness at Intersections Sankar Rengarajan, Southwest Research Institute 5:15 PM 5:30 PM BAT394: Highly Ordered Hierarchical Anodes for Extreme Fast-Charging Batteries MAT136: High-Performance Computing and High- Neil Dasgupta, University of Michigan Throughput Characterizations toward Interfacesby-Design for Dissimilar Materials Joining Xin Sun, ORNL; Ayoub Soulami, PNNL 5:45 PM 6:00 PM MAT137: Adhesive Bonding of Carbon-Reinforced Plastic to Advanced High-Strength Steel Zhili Feng, ORNL; Kevin Simmons, PNNL 6:15 PM 6:30 PM 6:45 PM EEMS085: Overview of Key Insights from SMART Mobility 1.0 David Anderson, DOE 5/18/20 Tuesday, June 2, Oral Presentations Time Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS) Wednesday, June 3, Oral Presentations Time 10:00 AM 10:15 AM 10:30 AM 10:45 AM Advanced Combustion Engines (ACE) Technology Integration (TI) ACE022: Joint Development and Coordination of Emissions Control Data and Models (Cross-cut Lean Exhaust Emissions Reduction Simulations (CLEERS) Analysis and Coordination) Josh Pihl, ORNL ACE023: CLEERS: Fundamentals in Selective Catalytic Reduction (SCR), Filter, and Protocol Yong Wang, PNNL TI104: Using Real-Time Mass Transit in First-/Last-Mile Solution Crystal Wang, Ford TI105: Multi-Modal, Energy-Optimal Trip Scheduling in Real-Time (METS-R) for Transportation Hubs Satish Ukkusuri, Purdue University 11:00 AM ACE085: Low-Temperature Emission Control to Enable Fuel-Efficient Engine Commercialization Todd Toops, ORNL 11:15 AM 11:30 AM ACE033: Emission Control for Lean Gasoline Engines Vitaly Prikhodko, ORNL 11:45 AM 12:00 PM 12:15 PM 12:30 PM ACE153: Chemistry of Cold-Start Emissions and Impact of Emissions Control Melanie Moses DeBusk, ORNL Lunch Break 1:00 PM ACE118: CLEERS Passive NOx Adsorber (PNA) Janos Szanyi, PNNL 1:15 PM 1:30 PM ACE027: Next-Generation Selective Catalytic Reduction (SCR)-Dosing System Investigation Abhijeet Karkamkar, PNNL 1:45 PM 2:00 PM 5/18/20 ACE119: Development and Optimization of a Multi-Functional SCR-DPF (Diesel Particulate Filter) Aftertreatment System for Heavy-Duty NOx and Soot Emission Reduction Ken Rappe, PNNL Lunch Break 5/18/20 Wednesday, June 3, Oral Presentations Time ACE119: Development and Optimization of a Multi-Functional SCR-DPF Combustion System Enginesfor (ACE) (Diesel ParticulateAdvanced Filter) Aftertreatment Heavy-Duty NOx and Soot Emission Reduction Ken Rappe, PNNL Technology Integration (TI) 2:15 PM 2:30 PM Break Break 3:00 PM ACE056: Low-Temperature Oxidation Yong Wang, PNNL 3:15 PM 3:30 PM ACE032: Cummins-ORNL Emissions Cooperative Research and Development Agreement (CRADA): NOx Control and Measurement Technology for Heavy-Duty Diesel Engines, Self-Diagnosing SmartCatalyst Systems Bill Partridge, ORNL 3:45 PM 4:00 PM ACE128: Reduced Precious Metal Catalysts for Methane and NOx Emission Control of Natural Gas Vehicles Michael Harold, University of Houston 4:15 PM 4:30 PM Break 5:00 PM ACE129: Design and Optimization of Structured Multi-Functional Trapping Catalysts for Conversion of Hydrocarbons and NOx from Diesel and Advanced Combustion Engines Michael Harold, University of Houston 5:15 PM 5:30 PM 5:45 PM 6:00 PM 6:15 PM 6:30 PM ACE130: Development of Passive Hydrocarbon/NOx Trap Catalysts for LowTemperature Gasoline Applications Mark Crocker, University of Kentucky Break Wednesday, June 3, Oral Presentations Time 6:45 PM Advanced Combustion Engines (ACE) Technology Integration (TI) 5/18/20 Wednesday, June 3, Oral Presentations Time 10:00 AM Fuel and Lubricant Technologies (FT) Electrification Technologies (ELT) FT037: Co-Optimization of Fuels and Engines (Co-Optima) Robert Wagner, ORNL ELT082: Highly Integrated Wide Bandgap Power Module for Next Generation Plug-In Vehicles John Czubay, General Motors FT067: Multi-Mode/Multi-Mode Compression Ignition : Fuel-Property Characterization and Prediction Tim Bays, PNNL ELT092: Wound Field and Hybrid Synchronous Machines for Electric Vehicle Traction with Brushless Capacitive Rotor Field Excitation Ian Brown, Illinois Institute of Technology FT088: Fuel Property Experimental Kinetics Gina Fioroni, NREL ELT093: High-Speed Hybrid Reluctance Motor with Anisotropic Materials Edwin Chang, General Motors 10:15 AM 10:30 AM 10:45 AM 11:00 AM 11:15 AM 11:30 FT069: Multi-Mode: Fuel-Property Impacts and Limitations on Combustion-ELT091: Cost-Effective 6.5% Silicon Steel Laminate for Electric Machines AM Spark Ignition Focus Jun Cui, Iowa State University Derek Splitter, ORNL 11:45 AM 12:00 PM 12:15 PM 12:30 PM FT070: Multi-Mode: From In-Cylinder Combustion Diagnostics to DriveCycle Fuel Economy Magnus Sjoberg, SNL ELT202: Charging Infrastructure Technologies: Smart Electric Vehicle Charging for a Reliable and Resilient Grid (RECHARGE) Andrew Meintz, NREL Lunch Break Lunch Break FT071: Multi-Mode Operation in Gasoline Direct-Injection Engines: FuelProperty Effects and Approaches to Expand the Advanced CompressionIgnition Range Toby Rockstroh, ANL ELT201: Charging Infrastructure Technologies: Smart Vehicle-Grid Integration ANL Keith Hardy, ANL FT072: Multi-Mode: Desired Fuel Properties for Advanced CompressionIgnition and Spark-Ignition Engine Performance Chris Kolodziej, ANL ELT200: Scalable Electric Vehicle Smart Charging Using Collaborative Autonomy Steve Chapin, LLNL FT073: Co-Optima Emissions and Emissions Control for Spark Ignition and Advanced Compression Ignition Multi-Mode Combustion Sreshtha Sinha Majumdar, ORNL ELT257: Directed Electric Charging of Transportation using eXtreme Fast Charging (XFC) (DIRECT XFC) Tim Pennington, INL 1:00 PM 1:15 PM 1:30 PM 1:45 PM 2:00 PM 5/18/20 5/18/20 Wednesday, June 3, Oral Presentations Time FT073: Co-Optima Fuel Emissions and Emissions Control (FT) for Spark Ignition and and Lubricant Technologies Advanced Compression Ignition Multi-Mode Combustion Sreshtha Sinha Majumdar, ORNL ELT257: Directed Electric ChargingTechnologies of Transportation Electrification (ELT)using eXtreme Fast Charging (XFC) (DIRECT XFC) Tim Pennington, INL Break Break FT074: Multi-Mode: Gasoline Direct-Injection Sprays Lyle Pickett, SNL ELT258: Grid-Enhanced, Mobility-Integrated Network Infrastructures for Extreme Fast Charging (GEMINI-XFC) Matteo Muratori, NREL FT075: Multi-Mode: Fuel Kinetics Bill Pitz, LLNL ELT115: Zero-Emission Cargo Transport I: Zero Emission Drayage Trucks Phil Barroca, SCAQMD FT076: Model-Based Fuel and Engine Optimization Juliane Mueller, LBNL ELT158: Zero-Emission Cargo Transport II: San Pedro Bay Ports Hybrid & Fuel-Cell Electric Vehicle Project Seungbum Ha, SCAQMD Break Break FT077: Heavy-Duty Mixed-Controlled Compression Ignition: Fuel Effects and Ducted Fuel Injection Charles Mueller, SNL ELT191: Medium-Duty Vehicle Powertrain Electrification and Demonstration Wiley McCoy, McLaren 2:15 PM 2:30 PM 3:00 PM 3:15 PM 3:30 PM 3:45 PM 4:00 PM 4:15 PM 4:30 PM 5:00 PM 5:15 PM 5:30 PM FT078: Heavy-Duty Mixed-Controlled Compression Ignition: Impacts of Fuel Properties on Combustion, Injection Characteristics, and Emissions Controls Martin Wissink, ORNL 5:45 PM 6:00 PM FT089: Heavy-Duty Advanced Compression Ignition John Dec, SNL 6:15 PM 6:30 PM ELT189: Electric Truck with Range-Extending Engine (ETREE) Jesse Dalton, Cummins ELT190: Medium-Duty Urban Range Extended Connected Powertrain (MURECP) Matthew Thorington, Bosch Wednesday, June 3, Oral Presentations Time 6:45 PM Fuel and Lubricant Technologies (FT) Electrification Technologies (ELT) 5/18/20 5/18/20 Wednesday, June 3, Oral Presentations Time 10:00 AM 10:15 AM 10:30 AM 10:45 AM 11:00 AM 11:15 AM 11:30 AM 11:45 AM 12:00 PM Materials Technology (MAT) Battery R&D (BAT) MAT152: A Hybrid Physics-Based, Data-Driven Approach to Model Damage Accumulation in Corrosion of Polymeric Adhesives Roozbeh Dargazany, Michigan State University MAT131: Corrosion Control in Carbon-Fiber Reinforced Polymer Composite-Aluminum Closure Panel Hem Joints Brian Okerberg, PPG Energy-Efficient Mobility Systems (EEMS) EEMS074: Smart Cities Topology–Curbs and Parking Stanley Young, NREL BAT395: Developing Safe, High-Energy, FastCharge Batteries for Automobiles Wenjuan Mattis, Microvast, Inc EEMS023: The Whole Traveler TranportationBehavior Study Anna Spurlock, LBNL MAT153: Multi-Scale Computational Platform for BAT396: Enabling Extreme Fast Charging through EEMS057: Urban Traveler–Changes and Impacts: Predictive Modeling of Corrosion in AluminumAnode Modification Mobility Energy Productivity (MEP) Metric Steel Joints Esther Takeuchi, Stony Brook University Venu Garikapati, NREL Miki Banu, University of Michigan EEMS011: Integrated Mesoscale Urban Systems BAT397: Titanium Niobium Oxide-Based Lithium- Modeling with Behavior, Energy, Autonomy, and MAT132: High-Strength Steel-Aluminum Ion Batteries for Extreme Fast-Charging Mobility (BEAM) to Explore Shared and Components by Vaporizing Foil Actuator Welding Applications Automated Vehicles and their Impacts on Energy Glenn Daehn, Ohio State University Sheng Dai, University of Tennessee at Knoxville and Mobility Zach Needell, LBNL MAT133: Corrosion Protection and Dissimilar Material Joining for Next-Generation Lightweight Vehicles DJ Spinella, Arconic BAT398: Extreme Fast-Charging Lithium-Ion Batteries Edward Buiel, Edward Buiel Consulting, LLC EEMS058: Systems and Modeling for Accelerated Research in Transportation (SMART) Mobility Consortium Tools and Process Development Aymeric Rousseau, ANL 12:30 PM Lunch Break Lunch Break Lunch Break 1:00 PM MAT173: Self-Sensing Fiber-Reinforced Composites Christopher Bowland, ORNL 12:15 PM BAT400: Novel Liquid/Oligomer Hybrid Electrolyte EEMS030: Experimental Evaluation of Eco-Driving MAT147: Continuous-Fiber, Malleable Thermoset with High Lithium-Ion Transference Number (HiStrategies LiT) for Extreme Fast Charging Composites with Sub-1-Minute Dwell Times: Wei-Bin Zhang, LBNL Zhijia Du, ORNL Validation of Impact Performance and Evaluation 1:15 PM of the Efficacy of the Compression Forming Process Gabriel Ilevbare, INL 1:30 PM MAT124: Integrated Computational Materials Engineering (ICME) Predictive Tools for Low-Cost Carbon Fiber for Lightweight Vehicles Xiadong Li, University of Virginia BAT401: Advanced Electrolytes for Extreme Fast Charging William Chueh, Stanford University EEMS044: Quantification of National Energy Impacts of Electrified Shared Mobility with Infrastructure Support Joann Zhou, ANL MAT125: Integrated Computational Materials Engineering (ICME) Predictive Tools for Low-Cost Carbon Fiber Jeramie Adams, Western Research Institute BAT442: Behind-the-Meter-Storage (BTMS) Overview Anthony Burrell, NREL EEMS045: Focused Validation and Data Collection to SMART Activities Eric Rask, ANL 1:45 PM 2:00 PM 5/18/20 Wednesday, June 3, Oral Presentations Time MAT125: Integrated Computational Materials Materials Technology (MAT) Engineering (ICME) Predictive Tools for Low-Cost Carbon Fiber Jeramie Adams, Western Research Institute BAT442: Behind-the-Meter-Storage (BTMS) Battery R&D (BAT) Overview Anthony Burrell, NREL EEMS045: Focused Validation and Data(EEMS) Collection Energy-Efficient Mobility Systems to SMART Activities Eric Rask, ANL Break Break Break BAT377: ReCell Overview and Update Jeff Spangenberger, ANL EEMS020: Multi-Scenario Assessment of Optimization Opportunities due to Connectivity and Automation Jackeline Rios-Torres, ORNL 2:15 PM 2:30 PM 3:00 PM MAT118: Functionally Designed Ultra-Lightweight Carbon-Fiber Reinforced Thermoplastic Composites Door Assembly Srikanth Pilla, Clemson University 3:15 PM 3:30 PM MAT119: Ultra-Light Hybrid Composite Door Design, Manufacturing, and Demonstration Nate Gravelle, TPI 3:45 PM BAT416: Cobalt-Free Cathode Materials and Their Novel Architectures EEMS033: Using Truck Cooperative Adaptive Shirley Meng, University of California at San Cruise Control (CACC) to Test Operational Energy Diego Consumption at Intersection with Active Traffic Signal Control BAT417: Cobalt-Free Cathodes for NextXiao-Yun Lu, LBNL Generation Lithium-Ion Batteries Neil Kidner, Nexceris 4:00 PM MAT146: Ultra-Lightweight, Ductile Carbon-Fiber Reinforced Composites Vlastimil Kunc, ORNL 4:15 PM 4:30 PM 5:00 PM Break MAT117: Development and Integration of Predictive Models for Manufacturing and Structural Performance of Carbon-Fiber Composites in Automotive Applications Venkat Aitharaju, General Motors BAT411: Aerosol Manufacturing Technology for Production of Low-Cobalt Lithium-Ion Battery Cathodes Toivo Kodas, Cabot Corporation BAT412: Novel Lithium-Iron and Aluminum Nickelate (NFA) as Advanced Cobalt-Free Cathode Materials Ilias Belharouak, ORNL Break BAT415: High-Nickel Cathode Materials for HighEnergy, Long-Life, Low-Cost Lithium-Ion Batteries Arumugam Manthiram, University of Texas at Austin 5:15 PM BAT414: Enhancing Oxygen Stability in LowCobalt, Layered-Oxide Cathode Materials Huolin Xin, University of California at Irvine 5:30 PM BAT413: High-Performance, Low-Cobalt Cathode Materials for Lithium-Ion Batteries Donghai Wang, Penn State University MAT122: Close-Proximity Electromagnetic Carbonization (CPEC) Felix Paulauskas, ORNL EEMS039: Charging Infrastructure Design Tradeoffs for a Fleet of Human-Driven and Fully Automated Electric Vehicles in San Francisco John Smart, INL Break EEMS081: Nationwide Energy and Mobility Impacts of CAV Technologies David Gohlke, ANL EEMS016: Energy-Efficient CAVs Dominik Karbowski, ANL 5:45 PM 6:00 PM MAT174: Carbon-Fiber Technology Facility (CFTF) Merlin Theodore, ORNL 6:15 PM 6:30 PM EEMS059: Experimental Evaluation of CACC for Passenger Cars Xiao-Yun Lu, ANL Wednesday, June 3, Oral Presentations Time 6:45 PM Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS) 5/18/20 5/18/20 Thursday, June 4, Oral Presentations Time 10:00 AM Advanced Combustion Engines (ACE) Fuel and Lubricant Technologies (FT) ACE001: Heavy-Duty Diesel Combustion Mark Musculus, SNL 10:15 AM 10:30 AM ACE136: Medium-Duty Diesel Combustion Stephen Busch, SNL 10:45 AM 11:00 AM 11:15 AM 11:30 AM 11:45 AM 12:00 PM ACE135: Towards Predictive Nozzle Flow and Combustion Simulations for Compression Ignition Engines Gina Magnotti, ANL ACE154: Heavy-Duty Hybrid Diesel Engine with Front-End Accessory DriveIntegrated Energy Storage Chad Koci, Caterpillar ACE157: Low-Temperature Gasoline Combustion for High-Efficiency Medium- and Heavy-Duty Engines John Dec, SNL 12:15 PM 12:30 PM 1:00 PM Lunch Break Lunch Break ACE155: Low-Mass and High-Efficiency Engine for Medium-Duty Truck Applications Qigui Wang, GM 1:15 PM 1:30 PM ACE156: Next-Generation, High-Efficiency Boosted Engine Development Michael Shelby, Ford 1:45 PM 2:00 PM FT087: Multimode, Co-Optimized, Light-Duty Vehicle Engine Phil Zoldak, Hyundai-Kia North America 2:15 PM 2:30 PM Break Break 5/18/20 Thursday, June 4, Oral Presentations Time Advanced Combustion Engines (ACE) 3:00 PM ACE100: Improving Transportation Efficiency through Integrated Vehicle, Engine, and Powertrain Research - SuperTruck Darek Villeneuve, Daimler Trucks North America; Jeffrey Girbach, Daimler Trucks North America 3:15 PM Fuel and Lubricant Technologies (FT) 3:30 PM ACE101: Volvo SuperTruck 2: Pathway to Cost-Effective Commercialized Freight Efficiency Pascal Amar, Volvo Trucks North America 3:45 PM 4:00 PM ACE102: Cummins-Peterbilt SuperTruck Jon Dickson, Cummins 4:15 PM 4:30 PM 5:00 PM Break ACE103: Development and Demonstration of a Fuel-Efficient Class Tractor and Trailer SuperTruck Russell Zukouski, Navistar 5:15 PM 5:30 PM ACE124: SuperTruck - PACCAR Maarten Meijer, PACCAR 5:45 PM 6:00 PM 6:15 PM 6:30 PM 6:45 PM Break 5/18/20 Thursday, June 4, Oral Presentations Time 10:00 AM Electrification Technologies (ELT) Materials Technology (MAT) ELT198: Cybersecurity: Securing Vehicle Charging Infrastructure Jay Johnson, SNL MAT162: Machine Learning and Supercomputing to Predict Corrosion/Oxidation of High-Performance Valve Alloys Dongwon Shin, ORNL ELT199: Cybersecurity: Consequence-Driven Cybersecurity for High-Power Charging Infrastructure Richard Carlson, INL MAT163: Multiscale Modeling of Corrosion and Oxidation Performance and Their Impact on High-Temperature Fatigue of Automotive Exhaust Manifold Components Mei Li, Ford ELT206: Cybersecurity Platform and Certification Framework Development for Extreme Fast Charging, Integrated Charging, Infrastructure Ecosystem Sunil Chhaya, EPRI MAT164: Multiscale Development and Validation of the Stainless Steel Alloy Corrosion (SStAC) Tool for High-Temperature Engine Materials Michael Tonks, University of Florida ELT207: Enabling Secure and Resilient Extreme Fast Charging: A Software/Hardware Security Co-Design Approach Ryan Gerdes, Virginia Tech MAT186: Modeling of Light-Duty Engines Charles Finney, ORNL ELT205: Cybersecurity for Grid-Connected Extreme Fast Charging Station (CyberX) David Coats, ABB MAT187: Fundamental Studies of Complex Precipitation Pathways in Lightweight Alloys Dongwon Shin, ORNL Lunch Break Lunch Break ELT204: Charging Infrastructure Technologies: Development of a Multiport, >1 MW Charging System for Medium- and Heavy-Duty Electric Vehicles Andrew Meintz, NREL MAT188: Properties of Cast Aluminum-Copper-Manganese-Zirconium Alloys Amit Shyam, ORNL ELT241: High-Efficiency, Medium-Voltage Input, Solid-State, TransformerBased 400-kW/1000-V/400-A Extreme Fast Charger for Electric Vehicles Charles Zhu, Delta Electronics MAT189: Fundamental Development of Aluminum Alloys for Additive Manufacturing Alex Plotkowski, ORNL 10:15 AM 10:30 AM 10:45 AM 11:00 AM 11:15 AM 11:30 AM 11:45 AM 12:00 PM 12:15 PM 12:30 PM 1:00 PM 1:15 PM 1:30 PM 1:45 PM 2:00 PM ELT187: Comprehensive Assessment of On- and Off-Board, Vehicle-to-Grid Technology Performance and Impacts on Batteries and the Grid (SPIN System) Sunil Chhaya, EPRI 2:15 PM 2:30 PM Break MAT190: Oxidation Resistant Valve Alloys G Muralidharan, ORNL Break 5/18/20 Thursday, June 4, Oral Presentations Time Electrification Technologies (ELT) 3:00 PM ELT236: Direct-Current Conversion Equipment Connected to the MediumVoltage Grid for Extreme Fast Charging Utilizing Modular and Interoperable Architecture Watson Collins, EPRI 3:15 PM Materials Technology (MAT) MAT191: Overview of Advanced Characterization within the Powertrain Materials Core Program Tom Watkins, ORNL 3:30 PM ELT237: Enabling Extreme Fast Charging with Energy Storage Jonathan Kimball, Missouri S&T MAT192: Fundamentals of Austenitic Alloys via Additive Manufacturing Sebastien Dryepondt, ORNL ELT238: Intelligent, Grid-Friendly, Modular Extreme Fast Charging System with Solid-State Direct-Current Protection Srdjan Lukic, North Carolina State University MAT193: Higher Temperature Heavy-Duty Piston Alloys Dean Pierce, ORNL Break Break ELT239: High-Power Inductive Charging System Development and Integration for Mobility Omer Onar, ORNL MAT165: Directly Extruded High Conductivity Copper for Electric Machines Keerti Kappagantula, PNNL 3:45 PM 4:00 PM 4:15 PM 4:30 PM 5:00 PM 5:15 PM 5:30 PM ELT240: Wireless Extreme Fast Charging for Electric Trucks (WXFC-Trucks) Mike Masquelier, WAVE 5:45 PM 6:00 PM ELT197: High Power and Dynamic Wireless Charging of Electric Vehicles Veda Galigekere, ORNL 6:15 PM 6:30 PM ELT188: Bi-Directional Wireless Power Flow for Medium-Duty, Vehicle-toGrid Connectivity Omar Onar, ORNL 6:45 PM Thursday, June 4, Oral Presentations Time 10:00 AM Battery R&D (BAT) 5/18/20 Energy-Efficient Mobility Systems (EEMS) BAT317: Progress and Status of Battery500 Program Jun Liu, PNNL 10:15 AM 10:30 AM BAT359: Status and Challenges of Electrode Materials for High-Energy Cells Stanley Whittingham, Binghamton University 10:45 AM 11:00 AM 11:15 AM 11:30 AM 11:45 AM 12:00 PM BAT360: Scale-Up Optimization and Characterization of High-Nickel Cathodes Arumugam Manthiram, University of Texas at Austin EEMS027: Multi-Modal Energy Analysis for Freight Alicia Birky, NREL BAT361: Understanding Electrode Interface Through Cryogenic Electron Microscopy Yi Cui, Stanford University/SLAC EEMS060: Agent-Based Model and Data Collection for Inter- and Intracity Freight Movement Monique Stinson, ANL BAT362: Lithium-Metal Anodes: Problems and Multiple Solutions Based on EEMS034: Optimization of Intra-City Freight Movement and New Delivery Hosts, Interphase, and Electrolytes Methods Jason Zhang, PNNL Amy Moore, ORNL 12:15 PM 12:30 PM 1:00 PM Lunch Break Lunch Break BAT454: Development of Long-Life Lithium/Sulfur-Containing Polyacrylonitrile Cells Ping Liu, University of California at San Diego EEMS078: Simulation Model Results for Energy and Mobility Impact of Behavioral Scenarios in POLARIS Joshua Auld, ANL BAT364: Surface Coating for High-Energy Cathode Jihui Yang, University of Washington EEMS035: Coupling Land-Use Models and Network-Flow Models Paul Wadell, University of California at Berkeley 1:15 PM 1:30 PM 1:45 PM 2:00 PM BAT365: Stabilizing Lithium-Metal Anode by Interfacial Layer Zhenan Bao, Stanford University/SLAC 2:15 PM 2:30 PM Break 5/18/20 Thursday, June 4, Oral Presentations Time 3:00 PM Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS) BAT366: Advanced Imaging and Quantitative Characterization of LithiumMetal Anode and Its Solid Electrolyte Interphase (SEI) Shirley Meng, University of California at San Diego 3:15 PM 3:30 PM BAT367: Characterization Studies on Li-Metal Anode and High-Ni Cathode Materials Peter Khalifah, BNL 3:45 PM 4:00 PM 4:15 PM 4:30 PM 5:00 PM BAT368: Battery500 Integrated Cell Diagnostics and Modeling to Identify Critical Gaps in Achieving High Cycle Life Eric Dufek, INL Break BAT369: High-Energy Rechargeable Lithium-Metal Cells: Fabrication and Integration Jie Xiao, PNNL 5:15 PM 5:30 PM 5:45 PM BAT370: Advanced Diagnostics of Nickel-Rich, Layered-Oxide Secondary Particles Mike Toney, SLAC 6:00 PM BAT455: In Operando Characterization of Lithium Plating and Stripping William Chueh, Stanford University 6:15 PM 6:30 PM 6:45 PM Break ... 6:15 PM 6:30 PM 6:45 PM Tuesday, June 2, Oral Presentations Time Advanced Combustion Engines (ACE) Technology Integration (TI) 5/18/20 Tuesday, June 2, Oral Presentations Time Vehicle Technologies... PM 5/18/20 Tuesday, June 2, Oral Presentations Time Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT) 2:30 PM Break Break VAN920: Overview of VTO Analysis Program Jacob Ward,... 6:30 PM 6:45 PM Tuesday, June 2, Oral Presentations Time Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT) 5/18/20 5/18/20 Tuesday, June 2, Oral Presentations Time 10:00 AM