Bench grinders FTX 150 EM PRO, FTX 200 EMT PRO Instruction manual 3 FT X 15 0 E M PR O, FT X 20 0 E M T P RO B en ch gr ind er s ec ho EN G In st ru ct io n Ma nu al GB R WARNINGS 1 For your own saf. For your own safety, read the instruction manual before operating the electric grinder. 2. Read and understand the entire owner’s manual before attempting to assemble or operate. 3. Read and understand the warnings posted on the machine and in this manual. Failure to follow all of these warnings will result in serious injury. 4. Replace warning labels if they are hidden or removed. 5. This benchtop electric grinder is designed and intended for use only by properly trained and experienced personnel. If you are not familiar with the proper and safe operation of a bench electric grinder, do not use it until proper training and knowledge has been obtained. 6. Do not use this Bench Grinder for any purpose other than its intended use. If used for other purposes, it disclaims all warranties or implied warranties and is safe from injury resulting from such use. 7. Wear eye protection and always wear eye protectors and eye protectors. 8. Always wear approved safety glasses face shields while using this electric bench grinder. Everyday goggles have only impactresistant lenses; they are not safety goggles. 9. Before operating this bench electrostripper, remove the tie, rings, watches, and other jewelry, and bend the sleeves up past the elbows. Remove all loose clothing and pick up long hair. Nonslip shoes are recommended. Do not wear gloves.
Bench grinders FTX-150-EM PRO, FTX-200-EM/T PRO Instruction manual GBR echoENG Instruction Manual For your own safety, read the instruction manual before operating the electric grinder Read and understand the entire owner’s manual before attempting to assemble or operate Read and understand the warnings posted on the machine and in this manual Failure to follow all of these warnings will result in serious injury Replace warning labels if they are hidden or removed This benchtop electric grinder is designed and intended for use only by properly trained and experienced personnel If you are not familiar with the proper and safe operation of a bench electric grinder, not use it until proper training and knowledge has been obtained Do not use this Bench Grinder for any purpose other than its intended use If used for other purposes, it disclaims all warranties or implied warranties and is safe from injury resulting from such use Wear eye protection and always wear eye protectors and eye protectors Always wear approved safety glasses / face shields while using this electric bench grinder Everyday goggles have only impact-resistant lenses; they are not safety goggles Before operating this bench electro-stripper, remove the tie, rings, watches, and other jewelry, and bend the sleeves up past the elbows Remove all loose clothing and pick up long hair Non-slip shoes are recommended Do not wear gloves 10 Use ear protectors (earplugs) during prolonged periods of operation 11 Some powders created by sanding, sawing, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects, or other reproductive harm Examples of these chemicals include lead-based paint, crystalline silica from bricks, cement and other masonry products, and arsenic and chromium from chemically treated wood Your risk of exposure varies, depending on how often you this type of work To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such as face masks or other protective devices specifically designed to filter microscopic particles 12 Do not operate this machine while under the influence of drugs, alcohol or any medication 13 Make sure the switch is in the OFF position before connecting the machine to the power source 14 Make sure the machine is properly grounded 15 Perform all adjustments or maintenance of the machine with the machine disconnected from the power supply 16 Remove the adjusting keys and keys Be in the habit of checking that the keys and adjustment keys are removed from the machine before turning it on 17 KEEP PROTECTIONS IN THEIR PLACE and in good working order at all times when the machine is in use If disposed of for maintenance purposes, use extreme caution and replace guards immediately 18 Make sure the bench electric grinder is securely attached to the floor or bench before use 19 Check for damaged parts Before using the machine, the guards or other part that is damaged should be carefully checked to determine that it will function properly and perform its function Check the alignment of moving parts, parts breakage, assembly, and any other conditions that may affect their operation 20 Provide adequate space around the working area and no glare, good lighting 21 Have your workshop child-proof with locks, master switches 22 KEEP THE WORK AREA CLEAN Cluttered areas and benches invite accidents DO NOT USE IN A HAZARDOUS ENVIRONMENT Do not use power tools in wet or rainy locations Keep the work area well lit Keep the floor around the machine clean and free of scrap material, oil and grease 23 Keep visitors at a safe distance from the work area Keep children away 24 Give your work your full attention Looking around, having a conversation while working are careless acts that can result in serious injury 25 Use only the flanges provided with the electro-grinder 26 Maintain a balanced posture at all times so that you not fall or lean against molars or other moving parts Do not overload or use excessive force to perform any operation on the machine 27 Use a wheel suitable for the speed of the grinder Do not force a tool or accessory to work for which it was not designed The correct tool will the job better and safer 28 DISCONNECT TOOLS before servicing; When changing accessories, such as blades, bits and the like FTX-150-EM PRO, FTX-200-EM/T PRO Bench grinders WARNINGS 29 30 31 echoENG Instruction Manual GBR FTX-150-EM PRO, FTX-200-EM/T PRO Bench grinders 32 33 34 35 Use recommended accessories Refer to the owner’s manual for recommended accessories The use of improper accessories may cause a risk of injury to persons Improper accessories can be dangerous Frequently clean abrasive dust from underneath the grinder MAINTAIN TOOLS WITH CARE Keep tools sharp and clean for optimum and safe performance Follow instructions for lubricating and changing accessories Make sure the workpiece is securely attached to the table or bench Never use your hand to hold the workpiece Turn the machine off before cleaning Use a brush or compressed air to remove chips, not use your hands Do not lean against the machine Serious injury can occur if the machine overturns Never leave the machine running unattended Disconnect power and not leave the machine until it comes to a complete stop Remove loose items and unnecessary workpieces from the area before starting the machine DO NOT FORCE THE TOOL It will the best and safest job it was designed to CAUTION: This means that failure to heed the precautions may result in minor injury and/or possible damage to the machine WARNING: This means that if precautions are not heeded, serious injury or death may result TECHNICAL DATA Previous specifications were current at the time this manual was published, but due to our policy of continuous improvement We reserve the right to change specifications at any time without notice, without incurring obligations FTX-150-EM PRO Supply 230V/F1 0,52Kw – 0,65Hp Power Speed 2950 rpm Grinding wheel size 150x25x32mm Brush dimension Weight 18 Dimensions 480x260x260mm 8423640965034 EAN FTX-200-EM PRO 230/F1 0,90Kw-1,25Hp 2950 rpm 200x32x32mm 30 526x320x310mm 9423640965041 FTX-200-ET PRO 400V/F3 0,9Kw-1,25Hp 2950 rpm 200x32x32mm 30 526x320x310mm 8423640965058 USE Use the Bench Grinder only when the following conditions are met: • The Bench Grinder is in perfect technical condition • The Bench Grinder is only used for its intended purpose • The instruction manual is being followed • All safety devices are in place and active Immediately rectify faults or have them rectified Immediately stop the machine as soon as the functions fail and secure the machine against accidental or unauthorized operation Immediately inform the responsible person of any changes BEFORE STARTING WORK Before starting work, always check that the workpiece is free of oil, grease and paint residues This will ensure that the wheels are not blocked or dirty Check the condition of the wheels If they are dirty or dull, they must be scraped or replaced DURING WORK If necessary, first routine the workpiece with the grinding wheel and then regrind with the fine-grained wheel WORKPIECE SUPPORT For certain grinding operations, the workpiece support plate may be tilted Use the washers to level the difference in altitude Avoid overheating of the bench electric grinder Apply light pressure to the workpiece If a wheel has become very dirty, the surface should be scraped with a manual leveler Respect the environment when disposing of the grinding wheels MAINTENANCE In this chapter you will find important information about: Inspection, Maintenance and Repairs of the bench electro-grinder WARNING! Duly performed regular maintenance is an essential prerequisite for the long service life of the machine and the quality of the products it manufactures GBR The distance between the grinding wheel and the workpiece support plate should be as small as possible FTX-150-EM PRO, FTX-200-EM/T PRO Bench grinders Note that tilting may reduce the load absorption of the workpiece support plate WARNING! Consequences of incorrect maintenance and repair work may include: • Very serious injury to personnel working with the machine • Damage to the machine Only qualified personnel may carry out maintenance and repair work on the bench-top electric grinder echoENG Instruction Manual SECURITY PREPARATION WARNING! Only carry out maintenance work on the bench electro sharpening unit if it has been disconnected from the mains Place a warning sign RESUME Carry out a safety check before resuming work FTX-150-EM PRO, FTX-200-EM/T PRO Bench grinders WARNING! Before connecting the electric bench grinder, you must check that: • There is no danger to personnel • The bench electric grinder is not damaged INSPECTION AND MAINTENANCE The type and degree of wear depend to a large extent on the individual operating and operating conditions If the machine is used in accordance with the instructions, it will be largely maintenance-free REPLACING CERAMIC GRINDING WHEELS The wheel must be replaced whenever the distance between the outer diameter of the wheel and the edge of the grinding wheel cover is more than mm WARNING! echoENG Instruction Manual GBR Before assembly, check the ceramic wheels for damage or cracks If this type of defect is observed on a new wheel, it should not be installed under any circumstances • You can check the wheel for minor defects by removing it and tapping it gently A serious sound can be heard on damaged wheels • Make sure that the machine cannot be switched on without authorisation • Loosen the three fixing screws on the protective cover • Loosen the shaft nut and remove the safety plate • Remove the wheel from the drive shaft • Make sure that the counterplatform is correctly positioned on the shaft Place the new wheel on the shaft and fix it with the safety plate and the shaft nut WARNING! Only tighten the nut manually • Mount the protective cover and readjust it • Check the setting and position of the transparent spark arrestor and the tool holder echoENG Instruction Manual GBR FTX-150-EM PRO, FTX-200-EM/T PRO Bench grinders EXPLODED DRAWING echoENG Instruction Manual GBR FTX-150-EM PRO, FTX-200-EM/T PRO Bench grinders PARTLIST (SPECIFY MODEL BEFORE ASKING) echoENG / Man FTX-150-EM PRO, FTX-200-EM/T PRO 03-2019 / GBR / Rev.00 echoENG S.r.l Sede operativa: 20032 Cormano (MI) - Via dell’Innovazione, Tel +39 02 66306709 - Fax +39 02 66306714 www.echo-eng.it E-mail: info@echo-eng.it www.echo-eng.it ... accessories, such as blades, bits and the like FTX- 150- EM PRO, FTX- 200 -EM/ T PRO Bench grinders WARNINGS 29 30 31 echoENG Instruction Manual? ?? GBR FTX- 150- EM PRO, FTX- 200 -EM/ T PRO Bench grinders 32 33 34 35... FTX- 150- EM PRO, FTX- 200 -EM/ T PRO Bench grinders EXPLODED DRAWING echoENG Instruction Manual? ?? GBR FTX- 150- EM PRO, FTX- 200 -EM/ T PRO Bench grinders PARTLIST (SPECIFY MODEL BEFORE ASKING) echoENG / Man FTX- 150- EM. .. tighten the nut manually • Mount the protective cover and readjust it • Check the setting and position of the transparent spark arrestor and the tool holder echoENG Instruction Manual? ?? GBR FTX- 150- EM