Đang tải... (xem toàn văn)
PowerPoint præsentation 1 MOIT 13 September 2019 12 september 2019 MOIT (EESD) and The Danish Energy Agency Benchmarking of Industrial Energy Consumption 1 Purpose with meeting 12 september 2019 2 Pre.
MOIT (EESD) and The Danish Energy Agency Benchmarking of Industrial Energy Consumption MOIT 13 SEPTEMBER 2019 9/8/22 PURPOSE WITH MEETING • Present and discuss benchmarking concept (method) (memo forwarded before meeting) • Present and discuss guidelines for enterprises based on draft memos of: 1) 2) 3) 4) Guideline for calculate/determine SEC-Target (forwarded before meeting) Guideline for how to calculate current SEC-value (forwarded before meeting) Guideline for how to assess deviation between SEC-Target and SEC-value (not forwarded) Guideline for the plan/roadmap for meeting the SEC-target in the coming 3-5 years (content, reporting (format), controlling etc.) (not forwarded) • Agree on further steps regarding guidelines and procedures for benchmarking including: I II III 9/8/22 Input from two breweries and DOITs (2-4 partner DOITs) Finalization of guidelines Preparing DOIT-procedures for administering the benchmarking circulares BENCHMARKING METHODOLOGY 9/8/22 SOME DEFINITIONS… SEC-Target: The target for a given sector and production type/volume stated in the relevant benchmarking circular (Circular 19 for Beer and Beverage Industry) If the production is a mix of products stated in the circular, the SEC-Target has to be calculated by the enterprise SEC-Value: The actual SEC of the production facility Based on actual energy consumption and production volume at the facility The actual SEC can be based on metering (one or more meters) the energy consumption in the production facility or by “best assumptions” of the energy consumption The production volume can be related to different types of products 9/8/22 IDEWORKSHOP DEN 24 OKTOBER 2018 OVERALL METHODOLOGY APPROACH /1 • The methodology is based on a combination of a “explanatory” and a “hard” approach • Obligations for the enterprises: • Each year the enterprise have to: Determine the SEC-Target for the production site based on last years production mix and volume Calculate the actual SEC-Value for the production site based on last years production volume and energy consumption Clarify the deviation between SEC-Target and current SEC-Value Prepare a plan (roadmap) for the coming 3-5 years for how to bring SEC-Value closer to SEC-Target Report 1-4 to the DOIT using the templates in the circular 9/8/22 OVERALL METHODOLOGY APPROACH /2 • Obligations for the DOIT: • Each year the DOIT have to (to be discussed with the DOITs): Control if the enterprise comply with the circular by controlling the yearly report from the enterprises (procedures are to be developed) Be in dialogue with the enterprises to give inspiration for energy measures and information on the obligations to comply with the benchmarking circulars (to be discussed) Give cautions and fines if the enterprise not meet the SEC-Target or hand in a realistic roadmap (to be clarified in Decree 134) • In general the methodology is developed for DEUs but can be used by non-DEUs as well Needed changes/other requirements/approaches for the non-DEUs have to be discussed 9/8/22 DELIVERABLES • guidelines for enterprises: 1) Determine the SEC-Target 2) Calculate the current SEC-Value 3) Assess the deviation between SEC-Target and SEC-Value 4) How to prepare plan for meeting the SEC-Target • Memo with results from testing the guidelines at two breweries • Concept note on DOIT-procedures on how to administer the benchmarking circulars • Input to MOIT to relevant changes of Circular 09 and Decree 134 9/8/22 IDEWORKSHOP DEN 24 OKTOBER 2018 GUIDELINE FOR ENTERPRISES ON HOW TO DETERMINE THE SEC-TARGET 9/8/22 DETERMINE SEC-TARGET • A step-by-step guide for the enterprises DOITs will also use this guide • Two ways to determine the SEC-Target: • The production mix is stated directly in the circular: • Based on production volume and year the SEC-Target can be looked up in the circular directly • The production mix is not stated directly in the circular: • The SEC-Target can not be looked up directly in the circular and needs to be calculated: The calculation is a direct weight of the SEC-Target for the different product mix • The SEC-Target have to be determined each year, because: • The production volume can vary from year to year • The circular have different SEC-Targets for periods (2016-2020 and 2020-2025) 9/8/22 ASSESSMENT OF TECHNOLOGY SPECIFIC IMPROVEMENTS – EXAMPLE • Brewery Production: • Bottled beer: • Canned beer: 970,000 hl 1,415,000 hl • Draught beer: 15,000 hl • Total: 2,400,000 hl • Inputs • Reporting year: • Beer Production SECTarget,beer [MJ/hl] Beer Production [106 l/y] 9/8/22 2018 240,000,000 l Reporting Year [2016;2020] >100 [20-100] = the production is energy efficient • If SEC-deviation < = there might be a potential... Be in dialogue with the enterprises to give inspiration for energy measures and information on the obligations to comply with the benchmarking circulars (to be discussed) Give cautions and fines... volume can be related to different types of products 9/8/22 IDEWORKSHOP DEN 24 OKTOBER 2018 OVERALL METHODOLOGY APPROACH /1 • The methodology is based on a combination of a “explanatory” and a “hard”