Hướng dẫn kết nối màn hình HMI delta với PLC FuFeng

2 7 0
Hướng dẫn kết nối màn hình HMI delta với PLC FuFeng

Đang tải... (xem toàn văn)

Thông tin tài liệu

Hướng dẫn kết nối PLC FuFeng với HMI Delta. Lập trình truyền thông PLC và HMI Series HMI Connection Manual FuFeng APC Controller HMI Factory Setting Baud rate 115200, 8, None, 1 Controller Station Number 0 Control Area Status Area D0D10 Connection a RS 232 (DOP AAEAS, DOP B Series) Definition of PLC ReadWrite Address a Registers Format Type Word No (n) ReadWrite Range Data Length Note Timer Setting Value TSn TS0 – TS127 Word Timer Present Value TNn TN0 – TN127 Word 1 Counter Setting Value CSn CS0 – CS127 Word Counter Present Value CNn CN0 – CN127 Word 1 Data Memory.

Series HMI Connection Manual FuFeng APC Controller HMI Factory Setting: Baud rate: 115200, 8, None, Controller Station Number: Control Area / Status Area: D0/D10 Connection a RS-232 (DOP-A/AE/AS, DOP-B Series) DOP series Controller pin D-sub male (RS-232) RXD (2) TXD(2) TXD (3) RXD(3) GND (5) GND(5) Definition of PLC Read/Write Address a Registers Type Format Word No (n) Data Length Read/Write Range Timer Setting Value TSn TS0 – TS127 Word Timer Present Value TNn TN0 – TN127 Word Counter Setting Value CSn CS0 – CS127 Word Counter Present Value CNn CN0 – CN127 Word Data Memory Dn D0 – D999 Word Temperature Controller- KSn KS0 – KS15 Word KNn KN0 – KN15 Word CLn CL0 – CL15 Word Hn H0 – H15 Word Ln L0 – L15 Word Note 1 Temperature Setting Temperature Controller- Present Value Temperature ControllerLow-current Setting Temperature ControllerHigh Temperature Alarm Temperature ControllerLow Temperature Alarm 48 V1.00 Revision March, 2010 Series HMI Connection Manual Hướng dẫn kết nối PLC với HMI Delta DOP Type Temperature Controller - Format Word No (n) Read/Write Range Data Length In I0 – I15 Word Rn R0 – R15 Word Note Present Value of Current Temperature ControllerCycle Setting b Contacts Type Format Read/Write Range Bit No (b) Node R Rb R0 – R255 Node X Xb X0 – X239 Node Y Yb Y0 – Y159 Node S Sb S0 – S239 Node K Kb K0 – K127 Node T Tb T0 – K127 Node C Cb C0 – C127 Note NOTE 1) V1.00 This type of device is read only Revision March, 2010 www.plc.today 49 ...Series HMI Connection Manual Hướng dẫn kết nối PLC với HMI Delta DOP Type Temperature Controller - Format Word No (n) Read/Write... Node C Cb C0 – C127 Note NOTE 1) V1.00 This type of device is read only Revision March, 2010 www .plc. today 49

Ngày đăng: 07/06/2022, 23:44

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan