Fishandmolluscan metallothioneins
A structuralandfunctional comparison
Laura Vergani
1
, Myriam Grattarola
1
, Cristina Borghi
2
, Francesco Dondero
3
and Aldo Viarengo
3,4
1 Department of Biophysical Sciences and Technologies, M. & O. University of Genova, Italy
2 Department of Biology, University of Genova, Italy
3 Department of Environmental & Life Science, University of Piemonte Orientale, Alessandria, Italy
4 Center on Biology and Chemistry of Trace Metals, University of Genova, Italy
Metallothioneins (MTs) are cytosolic polypeptides
found in almost all organisms, including vertebrates,
invertebrates, plants and bacteria [1]. They do not
appear to be essential for life, even though they are
involved in many pathways, such as sequestration of
toxic (Cd, Hg) or essential (Zn, Cu) metals, scavenging
of oxyradicals, inflammation, and infection [2].
MTs exhibit unusual primary sequence, lacking histi-
dines and aromatic residues, and their 3D structure is
unique [3,4]. Cysteines represent one-third of the total
amino acids and are distributed in typical motifs con-
sisting of CC, CXC or CXYC sequences [5]. The beha-
viour of MTs is dominated by the nucleophilic thiol
group reacting with electrophilic compounds, including
many alkylating agents and radical species [6]. Verteb-
rate MTs have a monomeric dumbbell shape, com-
posed of two globular domains connected by a flexible
linker consisting of a Lys-Lys segment. Each domain
contains a ‘mineral core’ enclosed by two large heli-
cal turns of the polypeptidic chain. The N-terminal
Keywords
absorbance spectroscopy; circular
dichroism; metal release; structure ⁄
function relationship; thermal stability
Correspondence
L. Vergani, Department of Biophysical
Sciences and Technologies, M. & O.
University of Genova, Corso Europa 30,
16132 Genova, Italy
Fax: +39 010 3538346
Tel: +39 010 3538404
E-mail: Laura.Vergani@unige.it
(Received 6 July 2005, revised 14
September 2005, accepted 26
September 2005)
doi:10.1111/j.1742-4658.2005.04993.x
Metallothioneins (MTs) are noncatalytic peptides involved in storage of
essential ions, detoxification of nonessential metals, and scavenging of
oxyradicals. They exhibit an unusual primary sequence and unique 3D
arrangement. Whereas vertebrate MTs are characterized by the well-known
dumbbell shape, with a b domain that binds three bivalent metal ions and
an a domain that binds four ions, molluscan MT structure is still poorly
understood. For this reason we compared two MTs from aquatic organ-
isms that differ markedly in primary structure: MT 10 from the inverteb-
rate Mytilus galloprovincialis and MT A from Oncorhyncus mykiss. Both
proteins were overexpressed in Escherichia coli as glutathione S-transferase
fusion proteins, and the MT moiety was recovered after protease cleavage.
The MTs were analyzed by gel electrophoresis and tested for their differen-
tial reactivity with alkylating and reducing agents. Although they show an
identical cadmium content anda similar metal-binding ability, spectro-
polarimetric analysis disclosed significant differences in the Cd
7
-MT secon-
dary conformation. These structural differences reflect the thermal stability
and metal transport of the two proteins. When metal transfer from Cd
7
-
MT to 4-(2-pyridylazo)resorcinol was measured, the mussel MT was more
reactive than the fish protein. This confirms that the differences in the pri-
mary sequence of MT 10 give rise to peculiar secondary conformation,
which in turn reflects its reactivity and stability. The functional differences
between the two MTs are due to specific structural properties and may be
related to the different lifestyles of the two organisms.
Abbreviations
MT, metallothionein; GST, glutathione S-transferase; PAR, 4-(2-pyridylazo)resorcinol.
6014 FEBS Journal 272 (2005) 6014–6023 ª 2005 The Authors. Journal compilation ª 2005 FEBS
right-handed b domain binds three bivalent metal ions.
The C-terminal a domain is left-handed and binds four
bivalent ions. Zinc is preferentially located in the b do-
main and cadmium in the a domain. Therefore, the
b domain would regulate zinc and copper homeostasis,
whereas the a domain may play a central role in heavy
metal detoxification [7]. The loosely structured b do-
main is responsible for metal-bridge dimerization,
whereas the a domain is involved in oxidative dimeri-
zation. Metal bridge dimerization is reversed by dilu-
tion or addition of chelating agents, whereas oxidative
dimers are reduced by reducing compounds [8]. As
reported previously [9], oxidative dimerization may
also occur in vivo under conditions of stress, such as
exposure to toxic metals and reactive oxygen species
and in neurological disorders (e.g. Alzheimer’s disease).
A different susceptibility to oxidation may be import-
ant for the physiological role of the protein.
Despite the high homology among vertebrate MTs,
fish and mammalian MTs exhibit significant differences
at the level of primary structure, i.e. displacement of
one cysteine and fewer lysines [10].
Compared with vertebrates, invertebrate MTs show
unusual features in their primary structure. The
sequences of only a few MTs from aquatic inverte-
brates (crab, mussel, sea urchin, snail and oyster) have
so far been elucidated [11–17]. As in mammals and fish
[18], echinoderm MTs contain two globular domains
binding four and three bivalent ions [19]. On the other
hand, in crab (Scylla serrata and Cancer pagurus) the
two domains bind three bivalent metals each [20–22].
In comparison with mammalians, molluscan MTs usu-
ally have higher glycine content ( 15% in mussels),
randomly distributed throughout the sequence. Despite
the differences, molluscan MTs appear to be more clo-
sely related to vertebrate MTs than those from other
invertebrate phyla [23,24].
In this study we focused on two MTs from different
aquatic organisms which we had widely investigated in
previous work [25,26]: MT A from Oncorhyncus mykiss
and MT 10 from Mytilus galloprovincialis were selected
as representative of vertebrates and invertebrates,
respectively. Although MT 10 is longer than MT A,
both have a similar number of cysteine residues and
identical cadmium content. Both recombinant MTs
were tested for reactivity to alkylating and reducing
agents, to evaluate their susceptibility to oxidative and
metal-bridge dimerization. Secondary conformation
was analyzed in both the metal-free protein and Cd
7
-
MTs. After metal binding, significant differences
between the two forms were observed. The altered sec-
ondary structure influenced the physicochemical prop-
erties of the proteins, with MT 10 being more
thermostable than MT A. When the redox-induced
metal transfer from Zn
7
-MT or Cd
7
-MT to the specific
acceptor 4-(2-pyridylazo)resorcinol (PAR) was meas-
ured, MT 10 was much more reactive in terms of cad-
mium release. This observation is interesting because
the redox control of metal bioavailability seems to be
an important physiological function of MTs [27].
Results
Analysis of primary sequence
When the primary sequence of mussel MT 10 was
compared with that of fish MT A (Fig. 1) with Needle-
man–Wunsch global alignments [28], a low identity
was observed (39%). Because the first extra amino acid
number is similar in the two recombinant MTs, we
assumed that they affect the two proteins in a similar
way. Accordingly, experiments using atomic absorp-
tion spectroscopy estimated 7 mol cadmium bound per
mol recombinant MT in both samples.
The b domain of MT A has nine cysteines distri-
buted in classic Cys motifs. In MT 10, this domain is
two residues longer, but it has only eight cysteines with
a similar arrangement of the CXC motifs. Major dif-
ferences between the two proteins occur at the level of
the a domain, which is longer in MT 10 than in MT A
(42 vs. 29 residues) and has two additional cysteines.
Moreover, the cysteines are organized differently in
Fig. 1. Sequence alignment of fish MT Aandmolluscan MT 10. The sequences of the two recombinant MTs were aligned with the program
Needleman-Wunsch global alignments. This program uses the Needleman–Wunsch global alignment algorithm [28] to find the optimum
alignment (including gaps) of two sequences when considering their entire length.
L. Vergani et al. Comparison between two MTs from aquatic organisms
FEBS Journal 272 (2005) 6014–6023 ª 2005 The Authors. Journal compilation ª 2005 FEBS 6015
terms of both the CXC or CXYC sequence and Cys
motif arrangement. In summary, MT A has six CXC,
one CXYC and four CXYWC sequences, whereas
mussel MT 10 has nine CXC, one CXYC and five
CXYWC sequences. In MT 10, the last a domain Cys
motif is CXXXCC, instead of CXCC, which is typical
of other vertebrates. This feature has been reported in
the MT from the Antarctic fish Notothenia coriiceps
[18], but not in mussels. In conclusion, this comparat-
ive analysis localizes the major differences between the
fish andmolluscan MTs at the level of the a domain.
Because this cluster is mainly involved in cadmium
binding and oxidative dimerization, these differences
may reflect functional differences in the two MTs with
regard to Cd release and oxidation.
A further difference is the reduced number of lysines
in MT 10 compared with MT A (5 vs. 7), correspond-
ing to 6.8% of the amino-acid composition for the
mussel protein and 11.5% for the fish one. In spite of
the fewer lysines, MT 10 contains one more CK motif
(5 vs. 4), whereas mammalian MTs have seven. The
arrangement of the CK motifs also differs between
mussel and fish proteins: the four CK motifs of MT A
are equally distributed between the aand b domain,
whereas in MT 10, four are at the C-terminus and only
one at the N-terminus.
As previously reported [29], the hydropathic index
(a parameter that is inversely proportional to
flexibility) is lower in fish MTs than in mammalian
MTs. A higher flexibility should facilitate conforma-
tional changes in organisms living at low temperatures.
When the hydropathic index was calculated for
the trout MT Aand the mussel MT 10 using the
protparam tool [30], MT A yielded a negative value
()0.110), similar to that recorded for N. coriiceps [29],
whereas MT 10 gave a positive value (0.199) consis-
tently higher than that for mammalian MTs (0.098).
This points to mussel MT having a lower flexibility
than either the fish or mammalian counterparts.
Oxidative and metal bridge polymerization
After chromatographic purification and enzymatic
removal of the glutathione S-transferase (GST) tail,
proteins were analyzed by SDS ⁄ PAGE (15% gel). As
expected, MT A showed a lower molecular mass than
MT 10, but also more marked smearing at high
molecular mass than MT 10. This effect is due to the
presence of polymeric forms typical of native MTs
(Fig. 2). When both MTs were alkylated with N-ethyl-
maleimide, a unique band at a lower molecular mass
appeared, representing the monomeric form, and no
differences in mass between the two MTs could be
observed. Moreover, alkylation of the thiol group of
MT A resulted in disappearance of the smearing at
high molecular mass. A similar effect on the aggre-
gates was observed when MT A was reduced with
dithiothreitol, which caused the appearance of a single
AB
Fig. 2. Electrophoretic comparisons between fish MT Aand mussel MT 10. MT A (A) and MT 10 (B) were electrophoresed on SDS ⁄ 15%
polyacrylamide gel before (lane 1) and after the addition of an alkylating agent (N-ethylmaleimide) at two different concentrations: 40 and
80 m
M (lanes 2 and 3) for 3 h. MTs were also treated for the same period with a reducing agent (dithiothreitol) at 40 and 80 mM (lanes 4
and 5). To reduce aggregation, MT samples were handled in anaerobic conditions under nitrogen atmosphere. Molecular markers (lane M)
from the top: BSA, 66 kDa; chicken egg ovalbumin, 45 kDa; bovine chymotrypsinogen, 25 kDa; lysozyme, 14.3 kDa; ribonuclease A,
11.9 kDa; bovine lung aprotinin 6.5 kDa.
Comparison between two MTs from aquatic organisms L. Vergani et al.
6016 FEBS Journal 272 (2005) 6014–6023 ª 2005 The Authors. Journal compilation ª 2005 FEBS
band at 12 kDa, corresponding to the dimeric form
of the protein. In contrast, no changes occurred in
MT 10 when exposed to the reducing agent, indicating
lower susceptibility of the mussel protein to oxidation.
These results suggest that the smearing at high molecu-
lar mass (12–18 kDa) is due to oxidative polymeriza-
tion of the MT molecules, whereas dimer formation
( 12 kDa) is probably due to metal bridge effects.
The marked differences between the a domain
sequences of the two MTs described above is in line
with the reduced sensitivity to oxidation exhibited by
MT 10, as oxidative polymerization occurs mainly in
the a domain.
Characterization of structure and metal binding
UV absorption spectra of both MTs were recorded on
addition of increasing equivalents of cadmium ions to
the metal-free apoprotein, at neutral pH. After Cd(II)
titration, a shoulder peak appeared at 254 nm, reflect-
ing the charge-transfer interaction of the cadmium–
thiolate clusters. In both curves (Fig. 3) absorption at
254 nm increased steadily, until saturation was reached
at seven metal equivalents. The slope of the curve was
almost identical for the two MTs, indicating no signifi-
cant differences with respect to cadmium-binding prop-
erties. This agrees with the data acquired by atomic
absorption spectroscopy, which estimated 7 mol cad-
mium bound per mol MT.
On analysis of the CD spectra of the MTs, both
metal-free thioneins showed a strong negative band at
230 nm (Fig. 4), typical of proteins in random coil
conformation [31]. This confirms that both apo-MTs
were unfolded in the absence of metals, and only after
binding of the correct number of cadmium equivalents
did they assume a stable secondary structure. When
complexed to the metal, both MTs showed a strong
positive ellipticity band above 250 nm, but the peak
was red-shifted in the MT 10 spectrum compared with
that of MT A. The major differences were evident in
the region below 250 nm. In fact, both the negative
band at 245 nm and the positive one at 228 nm, char-
acteristic of the fish MT A, were lost in the MT 10
spectrum. Considering the spectral peculiarities, we
can infer that mussel MT 10 has an atypical secondary
conformation, which is probably due to the differences
in primary sequence.
Fig. 3. Spectrophotometric titration following the binding of Cd(II)
to the apo-MTs. The Cd-induced contribution to the absorption
spectrum at 254 nm is plotted against the number of Cd equiva-
lents added, from 0.3 to 8 ratio for both fish MT A (m) and mussel
MT 10 (n). Each curve is representative of at least three independ-
ent sets of measurements.
Fig. 4. CD analysis. CD spectra were acquired in the near-UV
region (from 190 to 290 nm) for fish MT A (A) and molluscan
MT 10 (B) for both Cd
7
-MT forms and the apoproteins. The metal-
free protein was obtained by acidification with HCl. The measure-
ments were performed on three different MT preparations.
L. Vergani et al. Comparison between two MTs from aquatic organisms
FEBS Journal 272 (2005) 6014–6023 ª 2005 The Authors. Journal compilation ª 2005 FEBS 6017
Thermal stability
We examined whether the differences in primary and
secondary structure affected the thermal stability of
the two MTs. UV absorption spectra were acquired
for fish and mussel Cd
7
-MTs, after exposure to a ther-
mal gradient. A
254
was plotted as a function of tem-
perature. As expected, in both cases we observed a
decrease in percentage absorbance with temperature
increase (Fig. 5). The absorbance of fish MT A
declined steadily starting at 30 °C, with a marked
change in slope above 50 °C, similar to the description
of D’Auria et al [18]. The thermal profile of MT 10
showed a similar trend, but the slope change occurred
at a higher temperature (above 60 °C). Moreover,
MT 10 maintained higher percentage absorbance at all
temperatures than the fish protein (0.7 vs. 0.5 at 90 °C,
respectively). These results suggest that the mussel MT
is much more thermostable at high temperatures than
the fish protein. This is in line with the greater rigidity
suggested by the hydropathic index.
Kinetics of metal release
Cysteine residues can be oxidized in vitro by mild cellu-
lar oxidants and release metals during the process
[32–34]. It has been suggested that oxidoreductive
mechanisms may also modulate in vivo the affinity of
cysteines for metal ions and regulate the bioavailability
of bivalent metals [35].
In the presence of the glutathione redox couple
(GSH ⁄ GSSG), we observed zinc release from both
recombinant MTs. The kinetics of this process were
similar early on, but, at saturation, MT 10 seemed to
release slightly more zinc than MT A (Fig. 6A).
The difference in metal-releasing ability was much
more evident when the Cd-complexed MTs were
assayed in the presence of the H
2
O
2
redox partner.
Because MTs have a higher affinity for cadmium than
for zinc (typically, K
d
¼ 5Æ10
)12
m for zinc and K
d
¼
5Æ10
)16
m for cadmium), a stronger oxidizing agent
such as H
2
O
2
was needed to detach cadmium ions
[32,36]. Cadmium release was much more marked for
MT 10 than for MT A (Fig. 6B).
These data point to a pronounced reactivity of the
metal–thiolate clusters in the mussel MT 10, which
Fig. 5. Thermal stability of fish and mussel Cd
7
-MTs. Absorption
UV spectra were acquired for fish MT A (m) and mussel MT 10
(n) as a function of the temperature increase from 20 to 90 °C. The
absorbance decrease at 254 nm was reported as a fraction of the
standard absorbance (absorbance at room temperature) in order to
compare the denaturation profile of the Cd–thiolate chromophore of
the two MTs. Each curve is representative of four independent
sets of measurements.
Fig. 6. Kinetics of zinc and cadmium release from recombinant
MTs. The metal release was followed by the formation of metal–
(PAR)
2
complex at 500 nm. Each experimental point represents the
difference between the absorbance measured in the presence and
absence of the appropriate redox couple: GSH ⁄ GSSG for zinc and
H
2
O ⁄ H
2
O
2
for cadmium. We measured (A) the kinetics of zinc
release and (B) the kinetics of cadmium release for fish MT A (m)
and mussel MT 10 (n). Each curve is representative of at least
three independent sets of measurements.
Comparison between two MTs from aquatic organisms L. Vergani et al.
6018 FEBS Journal 272 (2005) 6014–6023 ª 2005 The Authors. Journal compilation ª 2005 FEBS
releases zinc and cadmium more quickly and effectively
than fish MT A. The kinetic observations of a more
pronounced release of cadmium than zinc fits well with
our data indicating that the major structural differ-
ences are at the level of the a domain, which is in fact
responsible for cadmium binding.
Discussion
MTs are noncatalytic metalloproteins, the physiologi-
cal function of which is not yet fully understood. The
moderate variability of this class of proteins across
phylogenetically distant organisms reflects the highly
conserved function that they exert in living systems.
In contrast, the specific environmental requirements
explain the existence of numerous isoforms in the same
organism. A comparative analysis of the functional
and structural features of MTs from different organ-
isms may help to clarify their physiological role.
Usually, vertebrate MTs contain 61–62 amino-acid
residues, whereas larger chains with 72–74 residues are
found in molluscs and in nematodes, and shorter
chains have been reported in insects and fungi [37].
In this report, we describe the production and char-
acterization of two MTs from evolutionary distant
aquatic organisms, the fish MT Aand the mussel
MT 10. Whereas much information is available for fish
MTs [18,38], characterization of mussel MTs has been
a problem until now [39], which we have overcome by
using the recombinant protein.
When MT 10 from M. galloprovincialis was com-
pared with MT A from O. mykiss, the major finding
was a difference in their primary sequence, mainly at
the level of the a domain. These differences suggest
that the mussel protein a domain is larger than the
b domain. We therefore postulated an asymmetric
dumbbell shape for MT 10 and different behaviour in
terms of cadmium release and oxidative dimerization,
which occur in this region. As expected, we found that
oxidative dimerization was less marked in the mussel
MT 10 than in the fish MT A. When the kinetics of
metal release were investigated, MT 10 showed more
pronounced reactivity than MT A. We wish to empha-
size that this higher mobility was more marked for
cadmium than for zinc. Accordingly, the major struc-
tural differences are concentrated only in the domain
binding this toxic metal. The different reactivity can be
attributed to a different spatial arrangement of the
mercaptide bonds, altering their accessibility to oxid-
izing agents.
Marked differences between the two proteins
appeared also at the level of their secondary conforma-
tion. The CD spectrum of MT 10 lacked both the
245 nm negative and 228 nm positive bands that are
typical of vertebrate MTs. We hypothesized that these
striking differences in the CD spectra are due mainly to
the lysine residues, which are highly conserved in ver-
tebrate MTs, but not in mussel. The lower number of
lysine residues in MT 10 than in MT A (6.8% vs.
11.5%) may also explain the increased ability of the
mussel protein to release metals. The increased mobility
of cadmium and zinc of MT 10 may be due to a weaker
metal–thiolate interaction because of the reduced num-
ber of lysines. In fact, substitution of three lysines with
glutamates in the CK motifs of the a domain modified
the metal-binding ability of MT [40].
Finally, the mussel MT 10 showed greater thermal
stability than the fish protein, probably because of its
longer polypeptide chain. Moreover, MT 10 has a pos-
itive hydropathic index (0.199), whereas fish MTs are
usually characterized by a negative value ()0.110 for
trout MT A). As a higher hydropathic index means
lower flexibility, this feature may explain the higher
thermal stability of MT 10. This is confirmed by 2D
NMR spectroscopy data. A preliminary analysis of 2D
homonuclear (
1
H) NOESY spectra, acquired for both
proteins, indicates a more rigid structure for MT 10
than for MT A, with both the number of NOE peaks
and signal spread being greater in the former (Fig. 7).
All the above data led us to conclude that the mus-
sel MT is different, in terms of spatial conformation
and functional properties, from vertebrate MTs, even
if the cadmium content is identical. The higher metal
mobility and rigidity exhibited by MT 10 is probably
related to the environment inhabited by mussels, which
are subjected to sudden changes in environmental vari-
ables (temperature, anoxia, concentration of aquatic
pollutants). The modified a domain, which plays a role
in detoxification ⁄ sequestering of toxic metals (e.g. cad-
mium), would allow adaptation to the requirements of
these aquatic organisms.
Resolution of the 3D structure of MT 10 at the
atomic level will allow us to clarify the structural fea-
tures supporting the observed different reactivity. For
both MTs, besides 2D homonuclear (
1
H) NOESY spec-
tra, 2D heteronouclear (
113
Cd) NMR spectra have also
been acquired, and data processing is in progress. How-
ever, from acomparison of the raw 2D homonuclear
(
1
H) NOESY spectra, the differences between the two
proteins have already been confirmed (Fig. 7). When
spectra are compared in the same chemical-shift win-
dow, a greater number of NOE peaks and signal spread
is palpable in the MT 10 sample, providing clear evi-
dence of the difference in the level of structural organ-
ization. The more the spectrum is ‘crowded’ and the
wider the chemical-shift range over which the signal is
L. Vergani et al. Comparison between two MTs from aquatic organisms
FEBS Journal 272 (2005) 6014–6023 ª 2005 The Authors. Journal compilation ª 2005 FEBS 6019
spread, the more the structure can be assumed to be well
defined, therefore these raw data confirm that MT 10
has a better defined and stable structure than MT A.
Experimental procedures
Materials
Chemicals and molecular mass markers were supplied by
Sigma Aldrich (Milan, Italy). Reagents for bacterial growth
were purchased from Fluka (Milan, Italy). T4 DNA ligase
and Taq polymerase were from Stratagene (La Jolla, CA,
USA), and restriction enzymes and dNTPs from Promega
Italia (Milan, Italy). Expression vector pGEX 6P-1, E. coli
strains BL21 and JM109, precision protease and glutathi-
one–Sepharose 4B matrix were purchased from Amersham
Biosciences (Uppsala, Sweden). Primers for sequencing and
mutagenesis were synthesized by TibMolBiol (Genoa, Italy).
Cloning and amplification of MTs
The coding sequence of the O. mykiss MT A gene [41] was
a gift from Professor P. E. Olsson (Umea University,
Umea, Sweden) and was cloned as previously described
[42]. Recombinant molluscan MT 10 from M. galloprovin-
cialis (NCBI GeneBank database accession number
AY566248) was prepared starting from the 222-bp coding
sequence, previously cloned by our group. By PCR we
added a BamHI site upstream from the ATG codon, using
the 5¢-end primer (5¢-CTACTACGAATTAGGATCCCCT
GCACCTTG-3¢) and the 3¢-end primer (5¢-GTAATACGA
CTCACTATAGGGCGAATTGGG-3¢). Amplification was
performed as previously described [42]. The PCR fragment
was eluted from gel using the NUCLEOSPIN-EXTRACT
MN kit (Du
¨
ren, Germany) and subcloned into the expres-
sion vector pGEX-6P-1. Both recombinant MTs were syn-
thesized as fusion proteins, with a GST tail at the
N-terminus. After enzymatic removal of the GST, MT 10
had four additional amino acids (Gly-Pro-Leu-Gly) with
respect to the wild-type, with the initial Met substituted
with a Ser (Fig. 1). The sequence of the recombinant vector
and the correct orientation of the cDNA were checked by
sequencing it in both directions using the appropriate
pGEX primers (Amersham Biosciences).
Bacterial expression and purification
Large-scale expression was carried by inoculating 12.5 mL
Luria–Bertani medium containing 100 lgÆmL
)1
ampicillin
and growing the cells at 37 °C overnight with vigorous sha-
king. Then 1 L prewarmed 2XYT medium (16 gÆL
)1
tryp-
tone, 10 gÆ L
)1
yeast extract, 5 gÆ L
)1
NaCl, 100 lgÆmL
)1
ampicillin) was inoculated with 10 mL of the overnight
culture and grown until mid-exponential growth phase. To
MTA MT 10
Fig. 7. Comparison of the whole 2D-NOESY spectra of fish MT Aand mussel MT 10. The 2D nuclear Overhauser enhancement spectra
(2D-NOESY) were acquired on a Bruker Advance 600 MHz spectrometer (Rheimstetten, Germany) using 2 m
M solutions of the proteins in
95% H
2
O, 5%
2
H
2
Oor
2
H
2
OatpH 7.0 under a nitrogen atmosphere. Spectra are shown in the same chemical-shift window.
Comparison between two MTs from aquatic organisms L. Vergani et al.
6020 FEBS Journal 272 (2005) 6014–6023 ª 2005 The Authors. Journal compilation ª 2005 FEBS
overexpress the recombinant protein, we added isopropyl
b-d-thiogalactopyranoside to a final concentration of
0.5 mm. The highest level of nondegraded MT was observed
after 5 h of growth at 30 °C. For preparing Me
7
-MTs,
0.2 mm CdCl
2
was added to the culture medium, or alter-
natively Zn
7
-MT the same concentration of ZnCl
2
.
Recombinant MTs were purified by affinity chromatography
using glutathione–Sepharose 4B matrix to selectively bind
the GST tag of the fusion protein. The expression showed an
average yield higher than 1 mgÆL
)1
of culture. The bacterial
pellet was resuspended in cold NaCl ⁄ P
i
(140 mm NaCl,
2.7 mm KCl, 10 mm Na
2
HPO
4
, 1.8 mm KH
2
PO
4
, pH 7.3)
and lysed by mild sonication at 4 ° C. After addition of 1%
Triton X-100, the suspension was mixed gently at 4 °C for
30 min, and the supernatant was mixed for 30 min with
2 mL 50% slurry resin previously equilibrated. Recombinant
MT was recovered by enzymatic cleavage using ‘Prescission
Protease’ (120 UÆmL
)1
resin) to selectively remove the GST
tail. Digestion was carried out at 4 °C for 16 h directly on
the column equilibrated with digestion buffer (50 mm
Tris ⁄ HCl, pH 7, 150 mm NaCl, 1 mm dithiothreitol) [42].
SDS/PAGE electrophoresis and metal
quantification
At each step of the purification procedure, the presence of
the recombinant MT was checked by electrophoresis on
12.5% polyacrylamide gel, performed according to the clas-
sical method of Laemmli [43]. Because of the small dimen-
sions and the physicochemical features of MTs, the best
resolution was obtained by 16% Tris ⁄ Tricine SDS ⁄ PAGE
[44]. The cadmium content in the recombinant MTs was
determined with a polarized Spectra AA 558 atomic
absorption spectrophotometer (Varian, Torino, Italy). The
number of molecules of cadmium bound per molecule of
MT was determined using as a standard curve constructed
using a standard solution of cadmium chloride. Both fish
and mussel recombinant MTs contain 7 equivalents of cad-
mium per mol protein.
Protein quantification
At each step of the purification, total proteins were quanti-
fied by the Bradford assay [45], with BSA as standard. At
the end of the purification, MT was quantified by measur-
ing the absorbance of the metal-free protein at 220 nm in
0.1 m HCl using e
220
¼ 47 300 m
)1
Æcm
)1
[46]. Although the
absorption coefficient of molluscan apo-MT should be
higher once the amino-acid content is higher (73 vs. 61 resi-
dues), the protein concentration was calculated using the
absorption coefficient of vertebrates [24]. Alternatively MT
was quantified by estimating the -SH groups using Ellmans’
reagent in potassium phosphate buffer (2 m NaCl in 0.2 m
potassium phosphate, pH 8), using the absorption coeffi-
cient e
412
¼ 13 600 m
)1
Æcm
)1
[47].
Absorption and CD spectroscopy
Absorption spectra were acquired after resuspending each
recombinant MT (0.025 mgÆmL
)1
)in5mm Tris⁄ HCl
(pH 7) ⁄ 100 mm NaCl. UV spectra were recorded in the
wavelength range 200–300 nm, using a Jenway 6505 spec-
trophotometer (Felsted Dunmow, Essex, UK), both in
standard conditions and after exposure to a linear thermal
gradient (25–90 °C). A broad absorption shoulder occurred
near 250 nm when thionein binds cadmium. To analyse the
formation of the metal–thiolate clusters, we subjected fish
and molluscan MTs to titration with bivalent metals (zinc
and cadmium): 0.025 mgÆmL
)1
each protein was resus-
pended in 5 mm Tris ⁄ HCl (pH 7.5) ⁄ 100 mm NaCl ⁄ 1mm
dithiothreitol and the spectra were recorded in the range
220–300 nm at increasing metal ⁄ protein ratios [38].
CD spectra were recorded on a Jasco J-710 spectropola-
rimeter (Jasco, Tokyo, Japan) calibrated with a standard
solution of (+)-10-camphosulfonic acid. All spectra were
recorded in a 0.05-cm path-length quartz cell, using the
following parameters: time constant 4 s, scanning speed
20 nmÆmin
)1
, band width 2 nm, sensitivity 10 millidegrees,
step resolution 0.5 nm [48]. Photomultiplier high voltage
did not exceed 600 V in the spectral region under analysis,
and the absorbance never exceeded 1.0. Each spectrum was
an average of five scans over 290–190 nm. Protein concen-
tration was kept below 0.1 mgÆmL
)1
in 5 mm Tris ⁄ HCl
(pH 7) ⁄ 100 mm NaCl. All the acquired spectra were correc-
ted for the baseline and normalized to the amino-acid con-
centration, in order to calculate the mean residual molar
ellipticity (degreesÆcm
)2
Ædecimol
)1
). All experiments were
performed in strictly anaerobic conditions, by purging high-
grade nitrogen in the sample chamber. To characterize the
secondary structure of the two proteins, the acquired CD
spectra were analyzed by dedicated software [49–51].
Kinetics of metal release
Zinc and cadmium release were estimated spectrophotomet-
rically by following the formation of the metal–PAR com-
plex at 500 nm. For zinc kinetics, the MT samples (1.3 lm
protein) were resuspended in 0.2 m Tris ⁄ HCl, pH 7.4, and
incubated with 100 lm PAR in the absence or presence of
1.5 mm GSH ⁄ 3mm GSSG [32]. Cadmium mobility was
tested by measuring its transfer from Cd
7
-MT to PAR
induced by the presence of the H
2
O
2
⁄ H
2
O redox couple
[33]. Samples of 4.6 lm MT were added to the reaction buf-
fer (100 lm PAR, 50 mm Tris ⁄ HCl, pH 7.4) in the absence
or presence of 1 mm H
2
O
2
.
Acknowledgements
We would like to extend our gratitude to Professor
Gabriella Gallo for her scientific collaboration and
L. Vergani et al. Comparison between two MTs from aquatic organisms
FEBS Journal 272 (2005) 6014–6023 ª 2005 The Authors. Journal compilation ª 2005 FEBS 6021
Dr Mara Carloni for her experimental contributions.
We thank Dr Giuseppe Digilio (Bioindustry Park del
Canavese spa, Ivrea, Italy) and Professor Mauro Botta
for NMR spectra. This research was supported by a
grant from the National Research Council (within
the program ‘Biomolecules for Human Health’) and
from the University of Genova Project for the year
2002. This work was also supported by the 5th UE
Framework Program project Biological Effects of
Environmental Pollution in marine coastal ecosystems
(BEEP) (contract No. EVK3-2000-00543).
References
1 Hamer DH (1986) Metallothionein. Annu Rev Biochem
55, 913–951.
2 Coyle P, Philcox JC, Carey LC & Rofe AM (2002)
Metallothionein: the multipurpose protein. Cell Mol
Life Sci 59 , 627–647.
3 Braun W, Wagner G, Worgotter E, Vaa
´
kM,Ka
¨
gi JHR
&Wu
¨
thrich K (1986) Polypeptide fold in the two metal
clusters of metallothionein-2 by nuclear magnetic reso-
nance in solution. J Mol Biol 187, 125–129.
4 Furey WF, Robbins AH, Clancy LL, Winge DR, Wang
BC & Stout CD (1986) Crystal structure of Cd,Zn
metallothionein. Science 231, 704–710.
5Ka
¨
gi JHR, Vaa
´
k M, Lerch K, Gilg DE, Hunziker P,
Bernhard WR & Good M (1984) Structure of mammalian
metallothionein. Environ Health Perspect 54, 93–103.
6 Romero-Isart N & Vaa
´
k M (2002) Advances in the
structure and chemistry of metallothioneins. J Inorg
Biochem 88, 388–396.
7 Zhou Y, Li L & Ru B (2000) Expression, purification
and characterization of beta domain and beta domain
dimer of metallothionein. Biochim Biophys Acta 1524,
87–93.
8 Zangger K & Armitage IM (2002) Dynamics of inter-
domain and intermolecular interactions in mammalian
metallothioneins. J Inorg Biochem 88, 135–143.
9 Zangger K, Shen G, Oz G, Otvos JD & Armitage IM
(2001) Oxidative dimerization in metallothionein is a
result of intermolecular disulphide bonds between
cysteines in the alpha-domain. Biochem J 359, 353–360.
10 Scudiero R, Carginale V, Riggio M, Capasso C,
Capasso A, Kille P, Di Prisco G & Parisi E (1997)
Difference in hepatic metallothionein content in Antarctic
red-blooded and haemoglobinless fish: undetectable
metallothionein levels in haemoglobinless fish is accom-
panied by accumulation of untranslated metallothionein
mRNA. Biochem J 322, 207–211.
11 Lerch K, Ammer D & Olafson RW (1982) Crab Metal-
lothionein primary structures of metallothioneins 1 and
2. J Biol Chem 257, 2420–2426.
12 Mackay EA, Overnell J, Dunbar B, Davidson I, Hunzi-
ker PE, Ka
¨
gi JH & Fothergill JE (1993) Complete
amino acid sequences of five dimeric and four mono-
meric forms of metallothionein from the edible mussel
Mytilus edulis. Eur J Biochem 218, 183–194.
13 Wang Y, Mackay EA, Kurasaki M & Ka
¨
gi JH (1994)
Purification and characterisation of recombinant sea
urchin metallothionein expressed in Escherichia coli.
Eur J Biochem 225, 449–457.
14 Berger B, Dallinger R, Gehrig P & Hunziker PE (1997)
Primary structure of a copper-binding metallothionein
from mantle tissue of the terrestrial gastropod Helix
pomatia L. Biochem J 328, 219–224.
15 Barsyte D, White KN & Lovejoy DA (1999) Cloning
and characterization of metallothionein cDNAs in the
mussel Mytilus edulis L. digestive gland. Comp Biochem
Physiol C Pharmacol Toxicol Endocrinol 122, 287–296.
16 Tanguy A, Mura C & Moraga D (2001) Cloning of a
metallothionein gene and characterization of two other
cDNA sequences in the Pacific oyster Crassostrea gigas
(CgMT1). Aquat Toxicol 55 , 35–47.
17 Narula SS, Brouwer M, Hua Y, Armitage IM (1995)
Three-dimensional solution structure of Callinectes sapi-
dus metallothionein-1 determined by homonuclear and
heteronuclear magnetic resonance spectroscopy. Bio-
chemistry 34, 620–631.
18 D’Auria S, Carginale V, Scudiero R, Crescenzi O, Di
Maro D, Temussi PA, Parisi E & Capasso C (2001) Struc-
tural characterization and thermal stability of Northenia
coriiceps metallothionein. Biochem J 354, 291–299.
19 Riek R, Precheur B, Wang Y, Mackay EA, Wider G,
Guntert P, Liu A, Ka
¨
gi JH & Wu
¨
thrich K (1999) NMR
structure of the sea urchin (Strongylocentrotus purpura-
tus) metallothionein MTA. J Mol Biol 291, 417–428.
20 Otvos S, Olafson RW & Armitage IM (1982) Structure
of an invertebrate metallothionein from Scylla serrata.
J Biol Chem 257, 2427–2431.
21 Hunt CT, Boulanger Y, Fesik SW & Armitage IM
(1984) NMR analysis of the structure and metal seques-
tering properties of metallothioneins. Environ Health
Perspect 54, 135–145.
22 Overnell J, Good M & Vaa
´
k M (1988) Spectroscopic
studies on cadmium (II) - and cobalt (II)-substituted
metallothionein from the crab Cancer pagurus. Evidence
for one additional low-affinity metal-binding site. Eur J
Biochem 172, 171–177.
23 Dallinger R, Berger B, Hunziker PE, Birchler N, Hauer
CN & Ka
¨
gi JH (1993) Purification and primary struc-
ture of snail metallothionein. Similarity of the N-term-
inal sequence with histones H4 and H2A. Eur J
Biochem 216, 739–746.
24 Simens DC, Bebianno MJ & Moura JJ (2003) Isolation
and characterisation of metallothionein from the clam
Ruditapes decussates. Aquat Toxicol 63, 307–318.
Comparison between two MTs from aquatic organisms L. Vergani et al.
6022 FEBS Journal 272 (2005) 6014–6023 ª 2005 The Authors. Journal compilation ª 2005 FEBS
25 Viarengo A, Ponzano E, Dondero F & Fabbri R (1997)
A simple spectrophotometric method for metallothio-
nein evaluation in marine organism: an application to
mediterranean and antarctic molluscs. Mar Environ Res
44, 69–87.
26 Viarengo A, Burlando B, Ceratto N & Panfoli I (2000)
Antioxidant role of metallothioneins: a comparative
overview. Cell Mol Biol 46, 407–417.
27 Maret W (1994) Oxidative metal release from metallo-
thionein via zinc-thiol ⁄ disulfide interchange. Proc Natl
Acad Sci USA 91, 237–241.
28 Needleman SB & Wunsch CD (1970) A general method
applicable to the search for similarities in the amino
acid sequence of two proteins. J Mol Biol 48, 443–453.
29 Scudiero R, Temussi PA & Parisi E (2005) Fish and
mammalian metallothioneins: a comparative study. Gene
345, 21–26.
30 Gasteiger E, Hoogland C, Gattiker A, Duvaud S, Wil-
kins MR, Appel RD & Bairoch A (2005) Protein identi-
fication and analysis tools on the EXPASY server. In
The Proteomics Protocols Handbook (Walker JM, ed.),
pp 571–607. Humana Press, Totowa, NJ.
31 Willner H, Vaa
´
kM&Ka
¨
gi JHR (1987) Cadmium-thio-
late clusters in metallothionein: spectrophotometric and
spectropolarimetric features. Biochemistry 26, 6287–
6292.
32 Maret W, Vallee B & L (1998) Thiolate ligands in
metallothionein confer redox activity on zinc cluster.
Proc Natl Acad Sci USA 95, 3478–3482.
33 Quesada AR, Byres RW, Krezoski SO & Petering DH
(1996) Direct reaction of H
2
O
2
with sulfhydryl groups
in HL-60 cells: zinc-metallothionein and other sites.
Arch Biochem Biophys 334, 241–250.
34 Jacob C, Maret W & Vallee BL (1998) Control of zinc
transfer between thionein, metallothionein, and zinc
proteins. Proc Natl Acad Sci USA 95, 3489–3494.
35 Jiang LJ, Maret W & Vallee BL (1998) The glutathione
redox couple modulates zinc transfer from metallothio-
nein to zinc-depleted sorbitol dehydrogenase. Proc Natl
Acad Sci USA 95, 3483–3488.
36 Ka
¨
gi JHR, Suzuki KT, Imura N & Kimura M (eds)
(1993) Metallothionein III. Birkha
¨
user, Basel.
37 Ka
¨
gi JHR (1991) Overview of metallothionein. Methods
Enzymol 205, 613–626.
38 Capasso C, Abugo O, Tanfani F, Scire A, Carginale V,
Scudiero R, Parisi E & D’Auria S (2002) Stability and
conformational dynamics of metallothioneins from the
antarctic fish Notothenia coriiceps and mouse. Proteins
46, 259–267.
39 Dabrio M, Rodriguez AR, Bordin G, Bebianno MJ, De
Ley M, Sestakova I, Vaa
´
k M & Nordberg M (2002)
Recent developments in quantification methods for
metallothionein. J Inorg Biochem 88, 123–134.
40 Pan PK, Hou FY, Cody CW & Huang PC (1994) Sub-
stitution of glutamic acids for the conserved lysines in
the alpha domain affects metal binding in both the
alpha and beta domains of mammalian metallothionein.
Biochem Biophys Res Commun 202, 621–628.
41 Olsson PE, Kling P, Erkell LJ & Kille P (1995) Struc-
tural andfunctional analysis of the rainbow trout
(Oncorhyncus mykiss) metallothionein-A gene. Eur J
Biochem 230, 344–349.
42 Vergani L, Grattarola M, Dondero F & Viarengo A
(2003) Expression, purification, and characterization of
metallothionein-A from rainbow trout. Protein Expr
Purif 27, 338–345.
43 Laemmli U.K. (1970) Cleavage of structural proteins
during the assembly of the head of bacteriophage T4.
Nature 227, 680–685.
44 Scha
¨
gger H & von Jagow G (1987) Tricine-sodium
dodecyl sulfate-polyacrylamide gel electrophoresis for
the separation of proteins in the range from 1 to 100
kDa. Anal Biochem 166, 368–379.
45 Bradford MM (1976) A rapid and sensitive method for
the quantification of microgram quantities of protein
utilising the principle of protein-dye binding. Anal Bio-
chem 72, 142–146.
46 Bu
¨
hler R & Ka
¨
gi JHR (1978) Spectroscopic properties
of zinc-metallothionein. Experientia Supplement 34,
211–220.
47 Bu
¨
hler RHO & Ka
¨
gi JHR (1979) In Metallothionein
(Kagi, JHR & Nordberg, M, eds), pp. 211–220. Birkha-
user, Basel.
48 Bartolucci S, Gagliardi A, Pedone E, De Pascale D,
Cannio R, Camardella L, Rossi M, Nicastro G, de Chi-
ara C, Facci P, et al. (1997) Thioredoxin from Bacillus
acidocaldarius: characterization, high-level expression in
Escherichia coli and molecular modelling. Biochem J
328, 277–285.
49 Hennessey JP & Johnson WC (1981) Information con-
tent in the circular dichroism of proteins. Biochemistry
20, 1085–1094.
50 Manavalan P, Taylor P & Johnson WC Jr (1985) Circu-
lar dichroism studies of acetylcholinesterase conforma-
tion. Comparison of the 11S and 5.6S species and the
differences induced by inhibitory ligands. Biochim
Biophys Acta 829, 365–370.
51 Provencher SW & Glo
¨
ckner J (1981) Estimation of
globular protein secondary structure from circular
dichroism. Biochemistry 20, 33–37.
L. Vergani et al. Comparison between two MTs from aquatic organisms
FEBS Journal 272 (2005) 6014–6023 ª 2005 The Authors. Journal compilation ª 2005 FEBS 6023
. Fish and molluscan metallothioneins
A structural and functional comparison
Laura Vergani
1
, Myriam Grattarola
1
, Cristina Borghi
2
, Francesco. primer (5¢-CTACTACGAATTAGGATCCCCT
GCACCTTG-3¢) and the 3¢-end primer (5¢-GTAATACGA
CTCACTATAGGGCGAATTGGG-3¢). Amplification was
performed as previously