PB-Nr: M08
Testing, measure
Issued by Date Version Page
Ing. Mathe Juli 2001 0
1/1
Processowner: Ing. Mathe
Process purpose and
target
Definition from methods to the check correct of products
and processes. Sicherstellung of the quality of the used
inspection devices
Interfaces
Supplier: Process input
Standards, customer, laws,
development, production
Vorgaben an Methoden und Mittel
Kunde: Process output
Process owner Methods and checked measuring instruments
flow/process documentation/competence
In the directory M 08,02 testing instructions specified can be referred from each
description of process. For the execution of the individual checks the up-to-date valid
version of the testing instruction is to be consulted in each case. Maintenance of the
testing instructions takes place via the process owner of this process in co-operation
with the respective executing.
The examination of the quality of the inspection devices takes place after process M
08,01
applicable documents
M 08,01 control of inspection, measuring and test
M 08,02 directory of the testing instructions
. checks the up-to-date valid
version of the testing instruction is to be consulted in each case. Maintenance of the
testing instructions takes place via the. instruments
flow/process documentation/competence
In the directory M 08,02 testing instructions specified can be referred from each
description of process.