Đang tải... (xem toàn văn)
Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005 Omni catolog 2005
VOL 6-1 Standardizing The Industry Cut Lead Times In Half With No Compromise In Quality! COMPARISON SAVINGS FROM START TO FINISH PART DESCRIPTION: BRACKET TENSIONER-DIAMETER 1.484 X DEPTH 1.025 (2 CAVITY MOLD OF MEDIUM COMPLEXITY) OMNI S812CRP2 CUSTOM MOLD LEAD COST TIME OMNI MOLD LEAD COST TIME DOLLARS LEAD TIME SAVED SAVED PRELIMINARY DESIGN $1,200 WEEK $300 DAYS $900 DAYS FINISH DESIGN $2,100 WEEK $1,275 DAYS $825 DAY ORDERING $825 DAYS $300 DAY $525 DAY SCHEDULING/PROCESSING $750 DAYS $450 DAY $300 DAYS WEEK $1,140 DAYS $780 DAYS MACHINING CAVITY STEEL FINISH CAVITIES STANDARD FRAME COST OMNI MOLD SYSTEMS FRAME COST MACHINING FRAMES ASSEMBLY TOTAL $1,920 $12,000 WEEKS $12,000 $1,200 0 $4,300 $6,000 $2,250 $27,045 WEEKS $450 WEEK $1,425 10 WEEKS $21,640 WEEKS — $5,550 $300 — WEEK && 11 WEEK 44 DAYS DAYS DAY DAYS WEEKS $825 $5,405 DAYS WEEKS BASED ON A RATE OF $60.00 AN HOUR TOTAL DELIVERY TIME SAVED: 40% OR MORE Put OMNI Mold Systems To Work For You Today! To place orders see page 1-3 1-INTRODUCTION ™ OMNI MOLD SYSTEMS Omni Mold systems would like to introduce you to an exciting new process in building small to medium size injection molds Using this process will absolutely reduce your lead times and increase your profitability, while maintaining a very high standard of quality Omni has extensively researched the complete process of mold building, from design to assembly In the process we found there to be many repetitious functions that could be removed by increased STANDARDIZATION Imagine for a moment if there were nothing standard at all This means no leaderpins, sprue bushings, water nipples, stripper bolts, stop buttons, bushings, or any of the other STANDARDIZED components we all take for granted now What would it cost you to produce an average mold under these conditions? Do you think it would be wise to build a mold by producing all these parts as you go, or would you take advantage of all the standards available to you in today’s world? There was a time when these things were not standard and tool makers had to produce these parts along with the rest of the job STANDARDIZATION of these, and many other parts have helped to move the entire mold making industry ahead, while also making it a more profitable business Omni has STANDARDIZED mold making to a point which will someday be taken for granted the same way the standardization of the various other components we’ve just mentioned has come to be Those who take advantage will certainly enjoy much greater profitability, and reduced lead times It just makes sense! The five major steps in the process of mold manufacturing are as follows: 1.) Designing Omni has developed a very large library of designs that are completely dimensioned, ballooned, and include a bill of materials All are on CAD and available in DXF, IGES, CADKey -PRT, DWG, ME10 and solid step formats at no cost OMNI Mold Systems is on the Internet at www.omnimold.com You will be able to down load CAD data for all of the following products and more, from this site, or call to request a CD-Rom a) Two plate molds b) Three plate molds c) Cam action molds d) Stripper plate molds e) Rectangular and round pocket molds f) Side action components g) Lifters By using one of our many designs this will allow the designer the time to concentrate all his efforts on the molding area This will eliminate much of the repetitious work and mistakes One of our strongest tools for you to use is our free, no obligation, preliminary layout service By giving us a copy of your part print via fax, or upload onto the Web site, or e-mail, we will return to you, a preliminary layout with your part fit into one of our many systems, within one or two days This will enable you to see the compatibility and strengths of OMNI MOLD SYSTEMS 2.) Detail work Detail work such as cavities, cores, side action components etc., have been pre-manufactured and inventoried in many styles and sizes and will be shipped in one day a) Rectangular cavity blocks (S-7 or 420 ss soft state) with 010 grind stock for heat treat and final grind, 375 radius machined on all (4) corners b) Round Top and Bottom cavity inserts (S-7 or 420 ss soft state) in sizes from 2” to 6.5” dia They are completely CNC lathed with “O” rings, water jackets, and stepped to prevent the sheering of “O” rings at assembly Finish grind operation required at assembly c) Stripper Rings (S-7 soft) in sizes from 113/16” to 6” dia They are completely CNC lathed with snap rings for retaining Finish grind required at assembly d) Slides, guides, wear plates, wedges, and campins are hardened and ground with 005 grind stock left for final fitting e) Lifter assemblies in A-10 or H-13 material, finish ground or with grind stock (.010) These assemblies include OMNI’s exclusive guidance system Using one of our many components, will allow the mold maker to place all his efforts on the molding area 1-1 3.) Frame Work Omni has manufactured and inventoried many styles and sizes of mold frames that will ship in one day All of our mold frames have the following features; a) 100% Stainless Steel b) All components and machining as in a standard mold frame c) Cavity pockets or cavity bores d) Guided ejections e) Support posts f) Pry bar slots g) Eye bolt holes h) Spring loaded ejection i) Cavity Pocket and leader pin vents j) And much more Using one of our many mold frames, will allow the mold maker the time to place all his efforts toward the molding area This once again eliminates much of the repetitious work and mistakes 4.) Miscellaneous Components Omni Mold Systems come with all the miscellaneous components that are usually extras That means you will receive all the bolts, o-rings,cam pins (where applicable), bushings, and guide pins etc with your order This is a COMPLETE SYSTEM with amazing time savings! 5.) Assembly As most mold makers will agree, assembly is where many surprises will occur This is where much of the hidden cost can come from By using OMNI designs, components, and frames, many of the simple errors will be eliminated and quality will increase 6.) Specials Omni Mold Systems, although geared for production, does support special requests These might include, but are not limited to, thicker “A” or “B” plates, larger pockets, taller cores, or special bore diameters to name a few There is, of course, a small extra charge for special orders and a one to two week delivery in most cases OMNI MOLD SYSTEMS™ “Standardizing The Industry” Let us help you get started, As stated before, one of our strongest tools is our no obligation Preliminary layout service Give us your part print via fax or upload to our Web site, or E-mail free@omnimold.com We will return to you a preliminary with your part fit into one of our many systems within one or two days This will enable you to see the compatibility and strengths of OMNI MOLD SYSTEMS™ www.omnimold.com 1-2 PLACING ORDERS 1) FOR ORDERS TOLL FREE 1-888-OMNI-755 2) ALL TECH SUPPORT TOLL FREE 1-888-OMNI-755 3) ON THE INTERNET www.omnimold.com 4) E-MAIL QUESTIONS AND ORDERS sales@omnimold.com 5) FOR A FREE PRELIMINARY LAYOUT, E-MAIL PART PRINTS OR FAX THEM TO 1-860-282-2019 6) HAVE THE R & O DIMENSION FOR YOUR SPRUE BUSHING READY WHEN ORDERING FRAMES DOWN LOADING CAD FILES All cad files are ready for downloading in the following formats: • AutoCAD - DWG, Cadkey-PRT, DXF, IGES, and ME-10 • The Internet at www.omnimold.com • CD Rom New • 3D Solids - STEP - STP Format New • Parasolids - X_T Format TECH SUPPORT IF YOU FIND YOU ARE A LITTLE CONFUSED OR JUST NOT SURE IF YOU CAN FIT YOUR PART INTO AN OMNI SYSTEM, CALL US TOLL FREE -1-888-OMNI-755 WE WILL BE HAPPY TO HELP IN ANY WAY WE CAN WE HAVE A VERY QUALIFIED STAFF OF TECH SUPPORT AIDES, WAITING TO ANSWER YOUR QUESTIONS 1-3 To place orders see page 1-3 2-DESIGN CONCEPTS DESIGN CONCEPTS SUPERIOR SLIDE LOCKS IN ALL SLIDES OPTIONAL OUTBOARD SPRING - STRIPPER BOLT TO HOLD BACK SLIDES ROUND TAPERED INTERLOCKS WHEN USING 1.000” STROKE, MOLD MAKER MUST ADD ADDITIONAL CAM PIN CLEARANCE IN “B” PLATE & EJECTOR HSG CORE PIN RETAINER BUBBLER FOR WATER COOLED CORE PIN BAFFLE FOR WATER COOLED CORE PIN TALL LOCATING RING PROTRUDES BEYOND INSULATOR PLATE LOCATING RINGS AND TOP CLAMP PLATES AVAILABLE WITHOUT CENTER HOLES FOR USE WITH HOT SPRUE BUSHINGS, OFFSET SPRUES, ETC WATER IN BACK SIDE OF CAVITY 2-1 To place orders see page 1-3 DESIGN CONCEPTS MULTIPLE CAVITY IMPRESSIONS PER BLOCK WATER BAFFLED TO GO THRU CAVITY BLANK WATER IN RECTANGULAR BLOCKS WITH O’RINGS AND PLUMBED THROUGH TOP CLAMP PLATE WATER IN RECTANGULAR BLOCKS WITH EXTENSION WATER NIPPLES THREE PLATE SUCKER PINS SLIDES IN RECTANGULAR POCKETS ON ANGLES OR ANY WAY THEY WILL FIT INTO CAVITY BLOCK 2-2 DESIGN CONCEPTS FOR FLOATING “A” PLATE USE THREE PLATE & REPLACE STRIPPER BOLT WITH S.H.C.S MULTI TIP HOT RUNNER THICKER CAVITY AND MORE CRUSH HOT RUNNER MOLD: USE TWO PLT MOLD & REPLACE TOP CLAMP PLATE WITH MANIFOLD SYSTEM INCREASE K.O STROKE STRIPPER PLATE MOLD PRY BAR SLOTS BETWEEN ALL PLATES TWO CAVITY MOLD 2-3 EIGHT CAVITY MOLD STANDARD HOT RUNNER TECHNOLOGY Using an OMNI standard mold base will drastically reduce lead times on hot runner molds An OMNI applications Engineer will work with you on selecting the right frame for your application Once the frame is selected fill out the hot drop information on the previous page and fax it to OMNI Fax # (860) 282-2019 OMNI will alter a standard frame to accept a hot half and ship it in 12 weeks Because of OMNI’s standardized interface locations, you will be able to kick off your hot runner design as soon as you decide which OMNI frame you will need for your project This will allow your hot runner manufacturer to start work on your hot half right away Getting the hot runner going early in the project will help reduce overall lead time of the completed mold, giving you the edge you need (OMNI Mold Systems is not a hot runner manufacturer and we not supply technical support for the hot half) 8-13 9-PRICE LIST To place orders see page 1-3 PLACING ORDERS 1) FOR ORDERS TOLL FREE 1-888-OMNI-755 2) ALL TECH SUPPORT TOLL FREE 1-888-OMNI-755 3) ON THE INTERNET www.omnimold.com 4) E-MAIL QUESTIONS AND ORDERS sales@omnimold.com 5) FOR A FREE PRELIMINARY LAYOUT, E-MAIL PART PRINTS OR FAX THEM TO 1-860-282-2019 6) HAVE THE R & O DIMENSION FOR YOUR SPRUE BUSHING READY WHEN ORDERING FRAMES DOWN LOADING CAD FILES All cad files are ready for downloading in the following formats: • AutoCAD - DWG, Cadkey-PRT, DXF, IGES, and ME-10 • The Internet at www.omnimold.com • CD Rom New • 3D Solids - STEP - STP Format New • Parasolids - X_T Format TECH SUPPORT 9-PRICE LIST IF YOU FIND YOU ARE A LITTLE CONFUSED OR JUST NOT SURE IF YOU CAN FIT YOUR PART INTO AN OMNI SYSTEM, CALL US TOLL FREE -1-888-OMNI-755 WE WILL BE HAPPY TO HELP IN ANY WAY WE CAN WE HAVE A VERY QUALIFIED STAFF OF TECH SUPPORT AIDES, WAITING TO ANSWER YOUR QUESTIONS SECTION: - PRICE LIST ROUND TOP AND BOTTOM CAVITIES S-7 (SOFT) STEEL Page 3-1 TOP CAVITY BOTTOM CAVITY CATALOG NUMBER PRICE TCV-19411-S7 TCV-19421-S7 TCV-19431-S7 TCV-19451-S7 TCV-24421-S7 TCV-24431-S7 TCV-24451-S7 TCV-34411-S7 TCV-34421-S7 TCV-34431-S7 TCV-34451-S7 TCV-49421-S7 TCV-49431-S7 TCV-49451-S7 TCV-64421-S7 TCV-64431-S7 TCV-64451-S7 $76.00 $65.00 $76.00 $81.00 $70.00 $81.00 $90.00 $112.00 $106.00 $112.00 $117.00 $129.00 $139.00 $181.00 $181.00 $196.00 $263.00 CATALOG NUMBER BCV-19410-S7 BCV-19420-S7 BCV-19430-S7 BCV-19450-S7 BCV-24420-S7 BCV-24430-S7 BCV-24450-S7 BCV-34410-S7 BCV-34420-S7 BCV-34430-S7 BCV-34450-S7 BCV-49420-S7 BCV-49430-S7 BCV-49450-S7 BCV-64420-S7 BCV-64430-S7 BCV-64450-S7 PRICE $81.00 $70.00 $81.00 $90.00 $76.00 $86.00 $100.00 $117.00 $112.00 $117.00 $122.00 $174.00 $184.00 $216.00 $216.00 $226.00 $267.00 CAM ACTION MOLDS TCV-24421-S7 TCV-24431-S7 TCV-24451-S7 $70.00 $81.00 $90.00 BCV-24425-S7 BCV-24435-S7 BCV-24455-S7 $76.00 $86.00 $100.00 420 SS (SOFT) STEEL Page 3-2 TOP CAVITY CATALOG NUMBER TCV-19411-420 TCV-19421-420 TCV-19431-420 TCV-19451-420 TCV-24421-420 TCV-24431-420 TCV-24451-420 TCV-34411-420 TCV-34421-420 TCV-34431-420 TCV-34451-420 TCV-49421-420 TCV-49431-420 TCV-49451-420 TCV-64421-420 TCV-64431-420 TCV-64451-420 BOTTOM CAVITY PRICE CATALOG NUMBER $90.00 $78.00 $90.00 $96.00 $84.00 $96.00 $108.00 $133.00 $127.00 $133.00 $139.00 $154.00 $166.00 $216.00 $216.00 $234.00 $302.00 BCV-19410-420 BCV-19420-420 BCV-19430-420 BCV-19450-420 BCV-24420-420 BCV-24430-420 BCV-24450-420 BCV-34410-420 BCV-34420-420 BCV-34430-420 BCV-34450-420 BCV-49420-420 BCV-49430-420 BCV-49450-420 BCV-64420-420 BCV-64430-420 BCV-64450-420 PRICE $96.00 $84.00 $96.00 $108.00 $90.00 $102.00 $120.00 $139.00 $133.00 $139.00 $146.00 $196.00 $208.00 $258.00 $258.00 $270.00 $320.00 CAM ACTION MOLDS TCV-24421-420 TCV-24431-420 TCV-24451-420 PRICES EFFECTIVE JULY 2001 $84.00 $96.00 $108.00 BCV-24425-420 BCV-24435-420 BCV-24455-420 $90.00 $102.00 $120.00 P-1 SECTION: MOLD COMPONENTS PRICE LIST SURFACE GROUND RECTANGULAR CAVITY BLOCKS Page 3-4 CAVITY STRIPPER RINGS Page 3-3 CATALOG NUMBER POCKET SIZE 88CS Pocket Size 2.500 x 5.688 (2.510 x 5.698) 88CS Pocket Size 3.500 x 5.000 (3.510 x 5.010) 812CS Pocket Size 2.938 x 6.438 (2.948 x 6.448) 812CS Pocket Size 5.000 x 7.750 (5.010 x 7.760) 812CS Pocket Size 2.938 x 8.500 (2.948 x 8.510) 1012CS Pocket Size 4.063 x 6.438 (4.073 x 6.448) 1012CS Pocket Size 6.500 x 7.500 (6.510 x 7.510) 1012CS Pocket Size 4.063 x 8.500 (4.073 x 8.510) 1315CS Pocket Size 8.250 x 9.625 (8.260 x 9.365) C88CSP2 (2.450 x 3.110) C812CSP2 (2.450 x 6.990) P-2 CATALOG NUMBER S7 PRICE 420 PRICE CV-1325 CV-1825 CV-2325 CV-2825 CV-1335 CV-1835 CV-2335 CV-2835 CV-1326 CV-1826 CV-2326 CV-2826 CV-1357 CV-1857 CV-2357 CV-2857 CV-1328 CV-1828 CV-2328 CV-2828 CV-1346 CV-1846 CV-2346 CV-2846 CV-1367 CV-1867 CV-2367 CV-2867 CV-1348 CV-1848 CV-2348 CV-2848 CV-1389 CV-1889 CV-2389 CV-2889 CV-1523 CV-2523 CV-1526 CV-2526 $165.00 $181.00 $196.00 $210.00 $132.00 $153.00 $171.00 $188.00 $179.00 $199.00 $221.00 $242.00 $211.00 $256.00 $292.00 $329.00 $179.00 $199.00 $221.00 $242.00 $208.00 $236.00 $264.00 $293.00 $246.00 $298.00 $344.00 $395.00 $208.00 $236.00 $264.00 $293.00 $333.00 $390.00 $443.00 $498.00 $108.00 $115.00 $131.00 $170.00 $189.00 $208.00 $225.00 $241.00 $152.00 $175.00 $197.00 $216.00 $206.00 $229.00 $254.00 $278.00 $243.00 $294.00 $336.00 $378.00 $205.00 $228.00 $254.00 $278.00 $239.00 $271.00 $303.00 $337.00 $282.00 $342.00 $396.00 $454.00 $239.00 $271.00 $303.00 $336.00 $346.00 $406.00 $470.00 $531.00 $124.00 $132.00 $151.00 $196.00 STR-1940 STR-1941 STR-2440 STR-2441 STR-3440 STR-3441 STR-4940 STR-4941 STR-6440 STR-6441 PRICE $65.00 $70.00 $76.00 $81.00 $106.00 $114.00 $129.00 $139.00 $181.00 $191.00 RUNNER SUCKER PINS Page 3-3 CATALOG NUMBER SUC-125 SUC-125L SUC-188 SUC-188L SUC-250 SUC-250L SUC-375 SUC-500 SUC-625 SUC-750 PRICE $16.00 $16.00 $17.00 $17.00 $22.00 $22.00 $25.00 $30.00 $39.00 $50.00 PRICES EFFECTIVE JULY 2001 SECTION: MOLD COMPONENTS PRICE LIST INSULATOR PLATES Page 3-9 CORE PIN/ SUCKER PIN RETAINERS Page 3-5 CATALOG NUMBER RTR-10011 RTR-10013 PRICE $27.60 $29.50 CORE PIN RETAINERS FOR SLEEVE K.O Page 3-5 CATALOG NUMBER CPR-17200 CPR-27500 CPR-37500 CPR-54400 PRICE $52.00 $57.00 $62.00 $130.00 CATALOG NUMBER PRICE IP-88-TOP IP-88-BOT IP-812-TOP IP-812-BOT IP-1012-TOP IP-1012-BOT IP-1315-TOP IP-1315-BOT IP-1218-TOP IP-1218-BOT IP-1520-TOP IP-1520-BOT $137.00 $137.00 $157.00 $157.00 $171.00 $171.00 $215.00 $215.00 $228.00 $228.00 $277.00 $277.00 SIDE LOCK MACHINING FOR STANDARD RECTANGULAR POCKET OMNI MOLD BASES Page 3-8 CATALOG NUMBER 88CS 812CS 1012CS 1315CS 1218CS 1520CS PRICE $400.00 $400.00 $400.00 $450.00 $500.00 $500.00 SIDE LOCKS Page 3-7 CATALOG NUMBER PRICE SLC-10 SLC-20 SLC-30 $125.00 $125.00 $179.00 PRICES EFFECTIVE JULY 2001 P-3 VERSA SLIDE (MICRO) Page 4-1 CATALOG NUMBER PRICE SL-10-10 SL-10-20 $725.00 $793.00 VERSA SLIDE (SL-20 SERIES) SECTION: SLIDE ASSEMBLIES PRICE LIST Volume discounts are available on all versa-slides orders Please call for details VERSA SLIDE (SL-50 SERIES) Page 4-3 CATALOG NUMBER PRICE SL-20-10 SL-20-20 SL-20-30 $670.00 $690.00 $707.00 VERSA SLIDE (SL-25 SERIES) Page 4-5 CATALOG NUMBER PRICE SL-25-10 SL-25-20 SL-25-30 SL-25-40 SL-25-50 SL-25-60 SL-25-70 SL-25-80 SL-25-90 $780.00 $790.00 $795.00 $785.00 $795.00 $800.00 $790.00 $800.00 $810.00 VERSA SLIDE (SL-30 SERIES) Page 4-7 CATALOG NUMBER PRICE SL-30-10 SL-30-20 SL-30-30 SL-30-40 SL-30-50 SL-30-60 SL-30-70 SL-30-80 SL-30-90 $836.00 $848.00 $855.00 $843.00 $855.00 $860.00 $848.00 $860.00 $867.00 VERSA SLIDE (SL-40 SERIES) Page 4-9 P-4 CATALOG NUMBER PRICE SL-40-10 SL-40-20 SL-40-30 SL-40-40 SL-40-50 SL-40-60 SL-40-70 SL-40-80 SL-40-90 $904.00 $915.00 $922.00 $910.00 $922.00 $928.00 $915.00 $928.00 $934.00 Page 4-11 CATALOG NUMBER PRICE SL-50-10 SL-50-20 SL-50-30 SL-50-40 SL-50-50 SL-50-60 SL-50-70 SL-50-80 SL-50-90 $1290.00 $1300.00 $1310.00 $1300.00 $1310.00 $1320.00 $1310.00 $1320.00 $1330.00 VERSA SLIDE (SL-60 SERIES) Page 4-13 CATALOG NUMBER PRICE SL-60-10 SL-60-20 SL-60-30 SL-60-40 SL-60-50 SL-60-60 SL-60-70 SL-60-80 SL-60-90 $1410.00 $1430.00 $1450.00 $1430.00 $1450.00 $1470.00 $1450.00 $1470.00 $1490.00 UNI-SLIDE ASSEMBLIES Page 4-15 CATALOG NUMBER SLD-150-S SLD-330-S SLD-660-S SLD-661-S SLD-1000-S SLD-155-S SLD-335-S SLD-665-S SLD-666-S SLD-1005-S SLD-155-L SLD-335-L SLD-665-L SLD-666-L SLD-1005-L PRICE $861.00 $861.00 $861.00 $861.00 $861.00 $794.00 $794.00 $794.00 $794.00 $794.00 $1329.00 $1329.00 $1329.00 $1329.00 $1329.00 PRICES EFFECTIVE JULY 2001 SECTION: VERSA-LIFTERS PRICE LIST VERSA LIFTERS Page 4-20 & 4-21 CATALOG NUMBER VL10-H13-Y VL15-H13-Y VL20-H13-Y VL30-H13-Y VL40-H13-Y VL10-H13-N VL15-H13-N VL20-H13-N VL30-H13-N VL40-H13-N PRICE CATALOG NUMBER $293.00 $309.00 $313.00 $327.00 $344.00 $211.00 $227.00 $234.00 $245.00 $256.00 VL10-A10-Y VL15-A10-Y VL20-A10-Y VL30-A10-Y VL40-A10-Y VL10-A10-N VL15-A10-N VL20-A10-N VL30-A10-N VL40-A10-N PRICE $343.00 $358.00 $367.00 $387.00 $398.00 $286.00 $299.00 $313.00 $329.00 $342.00 SECTION: RECTANGULAR POCKET MOLDS PRICE LIST SERIES 88CS 77/8 x 77/8 BASE RECTANGULAR POCKET Page 5-4 POCKET SIZE 5.000 X 3.500 CATALOG NUMBER 88CS-1317-5N-N-2 88CS-1317-5N-Y-2 88CS-1323-5N-N-2 88CS-1323-5N-Y-2 88CS-1717-5N-N-2 88CS-1717-5N-Y-2 88CS-1723-5N-N-2 88CS-1723-5N-Y-2 88CS-1317-5N-N-0 88CS-1317-5N-Y-0 88CS-1323-5N-N-0 88CS-1323-5N-Y-0 88CS-1717-5N-N-0 88CS-1717-5N-Y-0 88CS-1723-5N-N-0 88CS-1723-5N-Y-0 PRICES EFFECTIVE JULY 2001 PRICE $2622.00 $2841.00 $2688.00 $2907.00 $2688.00 $2907.00 $2749.00 $2972.00 $2579.00 $2797.00 $2644.00 $2863.00 $2644.00 $2862.00 $2706.00 $2929.00 POCKET SIZE 5.688 X 2.500 CATALOG NUMBER 88CS-1317-6Y-N-2 88CS-1317-6Y-Y-2 88CS-1323-6Y-N-2 88CS-1323-6Y-Y-2 88CS-1717-6Y-N-2 88CS-1717-6Y-Y-2 88CS-1723-6Y-N-2 88CS-1723-6Y-Y-2 88CS-1317-6Y-N-0 88CS-1317-6Y-Y-0 88CS-1323-6Y-N-0 88CS-1323-6Y-Y-0 88CS-1717-6Y-N-0 88CS-1717-6Y-Y-0 88CS-1723-6Y-N-0 88CS-1723-6Y-Y-0 PRICE $2882.00 $3099.00 $2947.00 $3165.00 $2947.00 $3165.00 $3008.00 $3232.00 $2838.00 $3056.00 $2904.00 $3122.00 $2904.00 $3122.00 $2965.00 $3188.00 P-5 SECTION: RECTANGULAR POCKET MOLDS PRICE LIST SERIES 812CS /8 x 11 /8 BASE, RECTANGULAR POCKET Page 5-6 POCKET SIZE 6.438 X 2.938 6.438 X 2.938 P-6 CATALOG NUMBER PRICE 812CS-1317-6N-N-4 812CS-1317-6N-Y-4 812CS-1317-6Y-N-4 812CS-1317-6Y-Y-4 812CS-1323-6N-N-4 812CS-1323-6N-Y-4 812CS-1323-6Y-N-4 812CS-1323-6Y-Y-4 812CS-1317-6N-N-2 812CS-1317-6N-Y-2 812CS-1317-6Y-N-2 812CS-1317-6Y-Y-2 812CS-1323-6N-N-2 812CS-1323-6N-Y-2 812CS-1323-6Y-N-2 812CS-1323-6Y-Y-2 812CS-1717-6N-N-4 812CS-1717-6N-Y-4 812CS-1717-6Y-N-4 812CS-1717-6Y-Y-4 812CS-1723-6N-N-4 812CS-1723-6N-Y-4 812CS-1723-6Y-N-4 812CS-1723-6Y-Y-4 812CS-1717-6N-N-2 812CS-1717-6N-Y-2 812CS-1717-6Y-N-2 812CS-1717-6Y-Y-2 812CS-1723-6N-N-2 812CS-1723-6N-Y-2 812CS-1723-6Y-N-2 $2885.00 $3103.00 $3191.00 $3410.00 $2972.00 $3191.00 $3278.00 $3498.00 $2840.00 $3060.00 $3147.00 $3366.00 $2928.00 $3147.00 $3235.00 $3454.00 $2972.00 $3191.00 $3278.00 $3498.00 $3060.00 $3278.00 $3366.00 $3585.00 $2928.00 $3147.00 $3235.00 $3454.00 $3016.00 $3235.00 $3323.00 812CS-1723-6Y-Y-2 $3541.00 POCKET SIZE 7.750 X 5.000 8.500 X 2.938 CATALOG NUMBER PRICE 812CS-1317-7N-N-4 812CS-1317-7N-Y-4 812CS-1323-7N-N-4 812CS-1323-7N-Y-4 812CS-1717-7N-N-4 812CS-1717-7N-Y-4 812CS-1723-7N-N-4 812CS-1723-7N-Y-4 812CS-1717-7N-N-2 812CS-1717-7N-Y-2 812CS-1723-7N-N-2 812CS-1723-7N-Y-2 812CS-1317-7N-N-2 812CS-1317-7N-Y-2 812CS-1323-7N-N-2 812CS-1323-7N-Y-2 812CS-1317-8N-N-4 812CS-1317-8N-Y-4 812CS-1323-8N-N-4 812CS-1323-8N-Y-4 812CS-1717-8N-N-4 812CS-1717-8N-Y-4 812CS-1723-8N-N-4 812CS-1723-8N-Y-4 812CS-1317-8N-N-2 812CS-1317-8N-Y-2 812CS-1323-8N-N-2 812CS-1323-8N-Y-2 812CS-1717-8N-N-2 812CS-1717-8N-Y-2 812CS-1723-8N-N-2 812CS-1723-8N-Y-2 $2928.00 $3147.00 $3016.00 $3235.00 $3016.00 $3235.00 $3103.00 $3323.00 $2972.00 $3235.00 $3060.00 $3323.00 $2885.00 $3148.00 $2972.00 $3235.00 $2928.00 $3147.00 $3016.00 $3235.00 $3016.00 $3235.00 $3103.00 $3323.00 $2885.00 $3111.00 $2972.00 $3199.00 $2972.00 $3199.00 $3060.00 $3287.00 PRICES EFFECTIVE JULY 2001 SECTION: RECTANGULAR POCKET MOLDS PRICE LIST SERIES 1012CS /8 x 11 /8 BASE, RECTANGULAR POCKET Page 5-8 7 POCKET SIZE CATALOG NUMBER 6.438 X 4.063 1012CS-1317-6N-N-6 1012CS-1317-6N-Y-6 1012CS-1317-6Y-N-6 1012CS-1317-6Y-Y-6 1012CS-1323-6N-N-6 1012CS-1323-6N-Y-6 1012CS-1323-6Y-N-6 1012CS-1323-6Y-Y-6 1012CS-1717-6N-N-6 1012CS-1717-6N-Y-6 1012CS-1717-6Y-N-6 1012CS-1717-6Y-Y-6 1012CS-1723-6N-N-6 1012CS-1723-6N-Y-6 1012CS-1723-6Y-N-6 1012CS-1723-6Y-Y-6 1012CS-1317-6N-N-4 1012CS-1317-6N-Y-4 1012CS-1317-6Y-N-4 1012CS-1317-6Y-Y-4 1012CS-1323-6N-N-4 1012CS-1323-6N-Y-4 1012CS-1323-6Y-N-4 1012CS-1323-6Y-Y-4 1012CS-1717-6N-N-4 1012CS-1717-6N-Y-4 1012CS-1717-6Y-N-4 1012CS-1717-6Y-Y-4 1012CS-1723-6N-N-4 1012CS-1723-6N-Y-4 1012CS-1723-6Y-N-4 1012CS-1723-6Y-Y-4 PRICES EFFECTIVE JULY 2004 PRICE $3,190.00 $3,410.00 $3,498.00 $3,716.00 $3,278.00 $3,498.00 $3,585.00 $3,804.00 $3,278.00 $3,498.00 $3,585.00 $3,804.00 $3,366.00 $3,585.00 $3,673.00 $3,891.00 $3,146.00 $3,366.00 $3,454.00 $3,673.00 $3,235.00 $3,454.00 $3,541.00 $3,760.00 $3,235.00 $3,454.00 $3,541.00 $3,760.00 $3,323.00 $3,541.00 $3,629.00 $3,848.00 POCKET SIZE 7.500 X 6.500 8.500 X 4.063 CATALOG NUMBER 1012CS-1317-7N-N-6 1012CS-1317-7N-Y-6 1012CS-1323-7N-N-6 1012CS-1323-7N-Y-6 1012CS-1717-7N-N-6 1012CS-1717-7N-Y-6 1012CS-1723-7N-N-6 1012CS-1723-7N-Y-6 1012CS-1317-7N-N-4 1012CS-1317-7N-Y-4 1012CS-1323-7N-N-4 1012CS-1323-7N-Y-4 1012CS-1717-7N-N-4 1012CS-1717-7N-Y-4 1012CS-1723-7N-N-4 1012CS-1723-7N-Y-4 1012CS-1317-8N-N-6 1012CS-1317-8N-Y-6 1012CS-1323-8N-N-6 1012CS-1323-8N-Y-6 1012CS-1717-8N-N-6 1012CS-1717-8N-Y-6 1012CS-1723-8N-N-6 1012CS-1723-8N-Y-6 1012CS-1317-8N-N-4 1012CS-1317-8N-Y-4 1012CS-1323-8N-N-4 1012CS-1323-8N-Y-4 1012CS-1717-8N-N-4 1012CS-1717-8N-Y-4 1012CS-1723-8N-N-4 1012CS-1723-8N-Y-4 PRICE $3,235.00 $3,454.00 $3,323.00 $3,541.00 $3,323.00 $3,541.00 $3,410.00 $3,629.00 $3,191.00 $3,410.00 $3,278.00 $3,498.00 $3,278.00 $3,498.00 $3,366.00 $3,585.00 $3,235.00 $3,454.00 $3,323.00 $3,541.00 $3,323.00 $3,541.00 $3,410.00 $3,629.00 $3,191.00 $3,410.00 $3,278.00 $3,498.00 $3,278.00 $3,498.00 $3,366.00 $3,585.00 P-7 SECTION: RECTANGULAR POCKET MOLDS-PRICE LIST SERIES 1315CS 133/8 x 15 BASE RECTANGULAR POCKET Page 5-10 POCKET SIZE 8.250 X 9.625 4.063 X 8.500 (2) pockets 6.500 X 10.500 P-8 CATALOG NUMBER 1315CS-1317-9N-N-6 1315CS-1317-9N-Y-6 1315CS-1323-9N-N-6 1315CS-1323-9N-Y-6 1315CS-1717-9N-N-6 1315CS-1717-9N-Y-6 1315CS-1723-9N-N-6 1315CS-1723-9N-Y-6 1315CS-1317-9N-N-4 1315CS-1317-9N-Y-4 1315CS-1323-9N-N-4 1315CS-1323-9N-Y-4 1315CS-1717-9N-N-4 1315CS-1717-9N-Y-4 1315CS-1723-9N-N-4 1315CS-1723-9N-Y-4 1315CS-1317-4N-N-6 1315CS-1317-4N-Y-6 1315CS-1323-4N-N-6 1315CS-1323-4N-Y-6 1315CS-1717-4N-N-6 1315CS-1717-4N-Y-6 1315CS-1723-4N-N-6 1315CS-1723-4N-Y-6 1315CS-1317-4N-N-4 1315CS-1317-4N-Y-4 1315CS-1323-4N-N-4 1315CS-1323-4N-Y-4 1315CS-1717-4N-N-4 1315CS-1717-4N-Y-4 1315CS-1723-4N-N-4 1315CS-1723-4N-Y-4 1315CS-1317-6N-N-6 1315CS-1317-6N-Y-6 1315CS-1323-6N-N-6 1315CS-1323-6N-Y-6 1315CS-1717-6N-N-6 1315CS-1717-6N-Y-6 1315CS-1723-6N-N-6 1315CS-1723-6N-Y-6 1315CS-1317-6N-N-4 1315CS-1317-6N-Y-4 1315CS-1323-6N-N-4 1315CS-1323-6N-Y-4 1315CS-1717-6N-N-4 1315CS-1717-6N-Y-4 1315CS-1723-6N-N-4 1315CS-1723-6N-Y-4 PRICE $4,136.00 $4,377.00 $4,280.00 $4,522.00 $4,280.00 $4,522.00 $4,425.00 $4,666.00 $4,088.00 $4,330.00 $4,233.00 $4,473.00 $4,233.00 $4,473.00 $4,377.00 $4,618.00 $4,296.00 $4,537.00 $4,440.00 $4,682.00 $4,440.00 $4,682.00 $4,585.00 $4,826.00 $4,248.00 $4,490.00 $4,393.00 $4,635.00 $4,393.00 $4,635.00 $4,538.00 $4,779.00 $4,136.00 $4,377.00 $4,280.00 $4,522.00 $4,280.00 $4,522.00 $4,425.00 $4,666.00 $4,088.00 $4,330.00 $4,233.00 $4,473.00 $4,233.00 $4,473.00 $4,377.00 $4,618.00 SERIES 1218CS 117/8 x 18 BASE RECTANGULAR POCKET Page 5-12 POCKET SIZE 6.500 X 13.000 7.500 X 11.000 4.063 X 14.000 CATALOG NUMBER 1218CS-1317-13-N 1218CS-1317-13-Y 1218CS-1323-13-N 1218CS-1323-13-Y 1218CS-1717-13-N 1218CS-1717-13-Y 1218CS-1723-13-N 1218CS-1723-13-Y 1218CS-1317-11-N 1218CS-1317-11-Y 1218CS-1323-11-N 1218CS-1323-11-Y 1218CS-1717-11-N 1218CS-1717-11-Y 1218CS-1723-11-N 1218CS-1723-11-Y 1218CS-1317-14-N 1218CS-1317-14-Y 1218CS-1323-14-N 1218CS-1323-14-Y 1218CS-1717-14-N 1218CS-1717-14-Y 1218CS-1723-14-N 1218CS-1723-14-Y PRICE $4,188.00 $4,430.00 $4,333.00 $4,573.00 $4,333.00 $4,573.00 $4,477.00 $4,718.00 $4,188.00 $4,430.00 $4,333.00 $4,573.00 $4,333.00 $4,573.00 $4,477.00 $4,718.00 $4,188.00 $4,430.00 $4,333.00 $4,573.00 $4,333.00 $4,573.00 $4,477.00 $4,718.00 SERIES 1520CS 147/8 x 20 BASE RECTANGULAR POCKET Page 5-14 POCKET SIZE 9.625 X 14.000 CATALOG NUMBER 1520CS-1717-15-N 1520CS-1717-15-Y 1520CS-1723-15-N 1520CS-1723-15-Y 1520CS-2317-15-N 1520CS-2317-15-Y 1520CS-2323-15-N 1520CS-2323-15-Y PRICE $6,238.00 $6,438.00 $6,615.00 $6,815.00 $6,615.00 $6,815.00 $6,967.00 $7,167.00 PRICES EFFECTIVE JULY 2004 SECTION: ROUND CAVITY MOLDS PRICE LIST ROUND CAVITY TWO PLATE MOLDS Page 6-2 CATALOG NUMBER S88CRP2 S88CRP2-2375 S88C1P2 S88C1P2-2375 S1012C1P2 S1012C1P2-2375 S812C2P2 S812C2P2-2375 S812CRP2 S812CRP2-2375 S1218CRP2 S1218C2P2 S88C4P2 S88C4P2-2375 S1012C4P2 S1012C4P2-2375 S1520C4P2 S1218C8P2 S1520C8P2 S1315C16P2 PRICE $2,680.00 $3,031.00 $2,655.00 $3,006.00 $3,750.00 $4,101.00 $3,335.00 $3,686.00 $3,495.00 $3,846.00 $5,133.00 $5,140.00 $2,928.00 $3,279.00 $3,885.00 $4,236.00 $7,803.00 $5,313.00 $7,933.00 $5,590.00 ROUND CAVITY THREE PLATE MOLDS Page 6-3 ROUND CAVITY TWO PLATE STRIPPER PLATE MOLDS Page 6-4 CATALOG NUMBER X88CRP2 X88CRP2-2375 X88C1P2 X88C1P2-2375 X1012C1P2 X1012C1P2-2375 X812C2P2 X812C2P2-2375 X812CRP2 X812CRP2-2375 X88C4P2 X88C4P2-2375 X1012C4P2 X1012C4P2-2375 S88CRP3 S88C1P3 S1012C1P3 S812C2P3 S812CRP3 S88C4P3 S1012C4P3 PRICE $3,155.00 $3,285.00 $4,625.00 $4,038.00 $4,245.00 $3,477.00 $4,855.00 PRICES EFFECTIVE JULY 2004 $3,381.00 $3,732.00 $3,382.00 $3,733.00 $4,677.00 $5,028.00 $4,169.00 $4,520.00 $4,385.00 $4,736.00 $3,726.00 $4,077.00 $4,812.00 $5,163.00 ROUND CAVITY THREE PLATE STRIPPER PLATE MOLDS Page 6-5 CATALOG NUMBER CATALOG NUMBER PRICE X88CRP3 X88C1P3 X1012C1P3 X812C2P3 X812CRP3 X88C4P3 X1012C4P3 PRICE $3,935.00 $4,091.00 $5,634.00 $4,953.00 $5,164.00 $4,354.00 $5,874.00 P-9 SECTION: CAM ACTION MOLDS UNI-SLIDE SERIES PRICE LIST RECTANGULAR POCKETS Page 7-20 ROUND CAVITY Page 7-20 CATALOG NUMBER CATALOG NUMBER C88CSP2 C812CSP2 PRICE $3,925.00 $5,137.00 C88C1P2 C88C1P3 C812C2P3 PRICE $3,987.00 $4,530.00 $5,680.00 SECTION: HOT SPRUE BUSHINGS PRICE LIST 750” & 1.000” DIA HOT SPRUE BUSHING Page 8-3 & 8-4 CATALOG NUMBER SB29986 SB29988 SB29989 SB29990 SB29991 SB29992 PRICE $566.00 $566.00 $566.00 $566.00 $566.00 $566.00 PRECISION II DIRECT GATE SPRUE BUSHING Page 8-8 CATALOG NUMBER SV03710522974 SV03701627995 SV03710729976 P-10 PRICE $589.00 $620.00 $658.00 STANDARD & WEAR RESISTANT TIPS Page 8-8 CATALOG NUMBER TP050000 TP050001 TP050002 TP050003 TP050004 TP050005 PRICE $164.00 $149.00 $164.00 $149.00 $164.00 $149.00 SINGLE ZONE CONTROLER Page 8-9 CATALOG NUMBER KS010009 PRICE $490.00 PRICES EFFECTIVE JULY 2004 OMNI MOLD SYSTEMS ™ Standardizing The Industry OMNI MOLD SYSTEMS saves you time and money from design to delivery We have many different mold configurations and sizes to choose from and all are in stock and ready to ship We also offer a preliminary design service for FREE Give us a part design and we will a preliminary layout, fitting your part into one of our systems For more information call 1-888-OMNI-755 A Stand Alone Dedicated Mold System Standardizing The Industry CORPORATE OFFICE 508 BURNHAM STREET, SOUTH WINDSOR, CT 06074 PHONE: (860) 528-OMNI (6664) FAX: (860) 528-3180 SALES AND MANUFACTURING 178 ROBERTS STREET, EAST HARTFORD, CT 06108 PHONE: (860) 528-OMNI (6664) FAX: (860) 282-2019 For more information call 1-888-OMNI-755 www.omnimold.com ... www.omnimold.com 1-2 PLACING ORDERS 1) FOR ORDERS TOLL FREE 1-888 -OMNI- 755 2) ALL TECH SUPPORT TOLL FREE 1-888 -OMNI- 755 3) ON THE INTERNET www.omnimold.com 4) E-MAIL QUESTIONS AND ORDERS sales@omnimold.com... TOTAL DELIVERY TIME SAVED: 40% OR MORE Put OMNI Mold Systems To Work For You Today! To place orders see page 1-3 1-INTRODUCTION ™ OMNI MOLD SYSTEMS Omni Mold systems would like to introduce you... available in DXF, IGES, CADKey -PRT, DWG, ME10 and solid step formats at no cost OMNI Mold Systems is on the Internet at www.omnimold.com You will be able to down load CAD data for all of the following