BAO CAO ASI pot

Nhóm 14 • Nguyễn Trọng Kiên 04101081 • Nghiêm Hoàng Hải 04101048 • Huỳnh Quý Hải 04101047 Tóm Tắt về AS-I NETWORK What is AS-I ? • A simple network for actuators and sensors • Connects input / output devices to a PLC or PC • Connects I/O devices to a two-wire flat cable • Easily replaces point-to-point wiring systems • A complete networking solution Point-to-Point Wiring Actuator Sensor interface Networking Why Choose AS-i… • A simple 2-wire flat cable • Extremely fast system • Insulation displacement • Flexible topology • Cost effective • Best fit • Modular system AS-i System Components Contents • Introduce CP 242-2 • Program Introduce CP 242-2 • Technical Data of the Module • Status Display of the CP 242-2 • Meaning of the Buttons • Types of Operation With the CP 242-2 • Addressing the CP 242-2 in the PLC • Configuring the CP 242-2 Introduce CP 242-2  Meaning of the Data in the Digital Module :  Identification Register  Error Register  Status Byte  Control Byte Introduce CP 242-2  Meaning of the Data in the Analog Module :  Identification Register  Error Register  Access to the Analog Input and Output Words  Analog Input Area  Analog Output Area [...]... cấu hình (nút SET) để lưu trữ cấu hình cho Slave.Bấm nút SET lại để chuyển sang chế độ bảo vệ  Chuyển PLC sang chế độ RUN,và đặt bit PLC_RUN lên “1” Meaning of the Data in the Digital Module CP 242-2 bao gồm 4 thanh ghi:  8-bit thanh ghi nhận dạng (Identification Register)  8-bit thanh ghi báo lỗi (error register)  8-bit input register 8DI (status byte)  8-bit output register 8DO (control byte) . sensors • Connects input / output devices to a PLC or PC • Connects I/O devices to a two-wire flat cable • Easily replaces point-to-point wiring systems • A complete networking solution Point-to-Point Wiring