Tài liệu Copper Connectivity Solutions – Category 5e pdf

3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 115 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 5e Copper Connectivity Solutions – Category 5e Introduction 116 Patch Panels 118 Patch Cords 123 Termination Blocks 124 Modular Jacks 126 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 116 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 5e Copper Connectivity Solutions – Category 5e Introduction Mismatched Signal Rise Time The mismatched channel’s corrupted signal causes rise time to fall out of IEEE specifications. TrueNet ® Signal Rise Time The TrueNet channel keeps rise time within specifications, preserving signal integrity. Exceeding IEEE Category 5e standards, ADC’s TrueNet ® Category 5e patch panels, patch cords, modular jacks, and cable are impedance matched to deliver extra bandwidth and better attenuation with zero bit errors. TrueNet patch panels are manufactured in 24-port (1RU) or 48-port (2RU) configurations to provide high-density modular patching solutions for all high-density applications where space is limited. The LSA-PLUS ® ‚ IDC technology provides a secure, reliable and gas-tight connection and allows for the wire to be terminated with either a KRONE insertion tool or a 110 termination tool. The proof of the TrueNet performance is in the test results. The graphs below depict the rise time of both an impedance mismatched and matched system. The mismatched channel falls out of the IEEE specification; the TrueNet system keeps rise time within the IEEE specifications, preserving signal integrity. TrueNet Category 5e solutions deliver: • A complete end-to-end channel • Extra bandwidth, better attenuation • Zero bit errors • TIA/EIA-568-A Category 5e compliance • ISO/IEC 11801, Class D compliance 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 117 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 5e Hub Switch TrueNet ® Cable TrueNet ® Patch Cord TrueNet ® Patch Cord K610 Jacks Plug ’n’ Play Patch Panel with K610 Jacks Hub Switch TrueNet ® Cable TrueNet ® Patch Cord TrueNet ® Patch Cord K610 Jacks Feed-Thru (FT) Block TrueNet ® Category 5e IDC FT Block Solution TrueNet ® Category 5e RJ45 Modular Solution Hub Switch TrueNet ® Cable TrueNet ® Patch Cord TrueNet ® Patch Cord K610 Jacks TrueNet ® Patch Panel Copper Connectivity Solutions – Category 5e Introduction 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 118 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 5e Copper Connectivity Solutions – Category 5e Patch Panels Features • UL 1863 certified and Category 5e performance verified • Include rear wire manager • Wire can be terminated with either a KRONE or 110 tool • 45 degree silver-plated IDCs provide secure, reli - able gas-tight connection • Include paper labels or silk-screened area for station identification • Universal wiring label for easy termination of either T568A/B • Patch panels are designed to support Gigabit Ethernet transmission speeds • Panels can be rack mounted in standard EIA 19-inch racks or wall mounted using optional 19-inch hinged wall mount brackets ADC TrueNet ® Category 5e patch panels provide Category 5e performance in a high-density design with concise station and port labeling. O r d e r i n g I n f o r m a t i o n Description Dimensions (HxWxD) Catalog Number ® 24-port enhanced patch panel A/B 48-port enhanced patch panel A/B 24-port enhanced patch panel, paper labels, A/B 48-port enhanced patch panel, paper labels, A/B TrueNet ® Patch Panels 24-port silk-screened patch panel, 1.75" x 19" x 1.5" 6653 1 585-24 T568A/B compatible Quantity: 1 (44.45mm x 482.6mm x 38.1mm) 48-port silk-screened patch panel, 3.5" x 19" x 1.5" 6653 1 585-48 T568A/B compatible Quantity: 1 (88.9mm x 482.6mm x 38.1mm) 24-port patch panel with snap-in port 1.75" x 19" x 1.5" 6653 1 587-24 ID tabs and paper labels, (44.45mm x 482.6mm x 38.1mm) T568A/B compatible Quantity: 1 48-port patch panel with snap-in port 3.5" x 19" x 1.5" 6653 1 587-48 ID tabs and paper labels, (88.9mm x 482.6mm x 38.1mm) T568A/B compatible Quantity: 1 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 119 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 5e Copper Connectivity Solutions – Category 5e Patch Panels Dynamic Angle Right/Left Patch Panels The TrueNet ® dynamic angle right/left panel offers superior performance and flexibility. Unlike fixed angle right/angle left panels, ADC’s patented solution combines the ability to dynamically angle connections either right or left in a low profile. Forty-five degree silver plated IDCs can be punched down with either a standard 110 or KRONE termination tool. Features • Patented angle right/left eases stress on patch cords allowing for improved cable management • Low profile dynamic angling allows for greater flexibility and use in cabinet environments • UL 1863 certified and Category 5e performance verified • Conductors can be terminated with either a KRONE or 110 tool • 45 degree silver-plated IDCs provide secure, reli - able gas-tight connection • Includes adhesive paper labels for station identification • Universal wiring label for easy termination of either T568A/B • Patch panels are designed to support Gigabit Ethernet transmission speeds • Panels can be rack mounted in standard EIA 19-inch racks or wall mounted using optional 19-inch hinged wall mount brackets • Optional rear cable manager available O r d e r i n g I n f o r m a t i o n Description Dimensions (HxWxD) Catalog Number ® *Replace XX with: 03 = Red 05 = Blue 09 = Yellow 11 = Brown 04 = Green 08 = Orange 10 = Purple 24-port angle right/left patch panel, 1.75" x 19" x 1.5" PP24AC5ET T568A/B compatible Quantity: 1 (44.45mm x 482.6mm x 38.1mm) 48-port angle right/left patch panel, 3.5" x 19" x 1.5" PP48AC5ET T568A/B compatible Quantity: 1 (88.9mm x 482.6mm x 38.1mm) Rear cable management bar 1.75" x 19" x 4" ADCCMR-A (44.45mm x 482.6mm x 101.6mm) Label holder ADCLH-A Adhesive-backed, clear top-loading label holder Labels ADCLC-A Sheet (8.5" x 11") of label cards ID tabs (icons) ADCICBXX* Quantity: 25 per bag 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 120 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 5e Plug ‘n’ Play Patch Panels Copper Connectivity Solutions – Category 5e Patch Panels 120 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Part of ADC’s high performance line of modular products, these blank patch panels accept all the modular jacks and connectors available for ADC’s station outlets. The patch panels are designed to mount in standard EIA 19-inch (482.6mm) racks. 24-port high-density Plug ‘n’ Play patch panel with 6-port increments Patch Plus 24-port, six 4-port increments (front) 12-port mini patch panel 24-port high-density Plug ‘n’ Play patch panel with 4-port increments 48-port high-density Plug ‘n’ Play patch panel with 4-port increments Ordering information follows on the next page 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 121 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 5e O r d e r i n g I n f o r m a t i o n Description Dimensions (HxWxD) Catalog Number 24-port Patch Plus panel 3.5" x 19" x 1.5" 6653 2 760-24 Quantity: 1 (88.9mm x 482.6mm x 38.1mm) Attaches to wall mount brackets or standard TIA/EIA racks. Includes wire management on front and back; compatible with both KM8 and K610 jacks. Includes station, workstation and panel identification labeling capabilities High-density Plug ‘n’ Play patch panel Quantity: 1 Includes rear cable management. Front of panel is silk-screened with port numbers and label area. Adhesive labels for laser printing also available (contact ADC Technical Assistance Center) 24-port panel, 4-port increments 1.75" x 19" x 6" 6653 2 102-24 (44.45mm x 482.6mm x 152.4mm) 48-port panel, 4-port increments 3.5" x 19" x 6" 6653 2 102-48 (88.9mm x 482.6mm x 152.4mm) 24-port panel, 6-port increments 1.75" x 19" x 6" 6653 2 104-24 (44.45mm x 482.6mm x 152.4mm) 12-port mini patch panel 10" x 2.75" x 1.88" 6653 2 705-12 Quantity: 1 (254mm x 69.85mm x 47.8mm) Blank mini patch panels accept all modular jacks and connectors available for ADC’s station outlets. Includes (1) 89D bracket Label sheets for 4-port increment 6631 3 046-08 panels Quantity: 1 sheet Contains labels for 4-port Fascia, 4-port Patch Plus, Plug ‘n’ Play Patch Plus Plug ‘n’ Play Patch Panels Copper Connectivity Solutions – Category 5e Patch Panels 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 122 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 5e Copper Connectivity Solutions – Category 5e Patch Panels ® UMS/Mini Patch Panels Combine UMS/Mini Patch Panels with Ultim8 ™ or feed-through blocks for complete patching flexibility. O r d e r i n g I n f o r m a t i o n Description Dimensions (HxWxD) Catalog Number Category 5e UMS/Mini Patch Panels 6-port UMS/Mini Patch Panel, Type 105 6-port UMS/Mini patch panel, 1.73" x 4.77" x 2.08" 6653 1 607-00 Type 105, T568A/B Quantity: 1 Includes 1 patch board on 1 base; mounts on UMS mounting bracket in Type 105 position, Type 105 rod mount bracket, Type 105 back mount frame 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 123 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 5e Patch Cords Copper Connectivity Solutions – Category 5e Patch Cords ® O r d e r i n g I n f o r m a t i o n Description Cable Color Catalog Number* RJ45 plug to RJ45 plug, T568B, White TP5ETA-WTXX wired straight through Quantity: 1 Red TP5ETA-RDXX Blue TP5ETA-BLXX Green TP5ETA-GNXX Yellow TP5ETA-YLXX Gray TP5ETA-GYXX RJ45 plug to RJ45 plug, T568A, White TP5ETA0WTXX wired straight through Quantity: 1 Red TP5ETA0RDXX Blue TP5ETA0BLXX Green TP5ETA0GNXX Yellow TP5ETA0YLXX Gray TP5ETA0GYXX RJ45 plug to RJ45 plug, White TP5ETACWTXX crossover wired Quantity: 1 Red TP5ETACRDXX Blue TP5ETACBLXX Green TP5ETACGNXX Yellow TP5ETACYLXX Gray TP5ETACGYXX These RJ45 (8P8C) plug to RJ45 plug patch cords use ADC Category 5e cable and exceed the requirements for Category 5e. Before ordering patch cords, check the transmit and receive orientation of the hub and network interface card. Some manufacturers require a crossover of transmit and receive pairs; others have either the hub port or NIC card reversed in advance. Some can switch between the two. Please contact the ADC Technical Assistance Center with questions. *Replace XX with: 04 = 4' 10 = 10' 25 = 25' 07 = 7' 15 = 15' 50 = 50' RJ45 plug (T568B) RJ45 plug (T568B) RJ45 plug (T568A) RJ45 plug (T568A) RJ45 plug (T568B) RJ45 plug (T568A) 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 124 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 5e Copper Connectivity Solutions – Category 5e Termination Blocks ® Features • HighBand ® 10 blocks meet TIA/EIA Category 5e component specifications, resulting in increased throughput for DSL and other broadband applications • 10-pair increment block is ideal for multipair backbone cables • HighBand 10 blocks are familiar to Series 2 users and installers, eliminating training • Test port provides “look-both-ways” testing capability without the removal of any wires, as well as simple monitoring of a circuit using ADC test cords • Preterminated blocks reduce installation time • Complete patching and cross-connect options provide the versatility required for easy changes or testing • Labeling options allow for comprehensive identification • Universal mounting system (UMS) hardware available Adjustable Mounting Bracket (in Type 105 position) Horizontal Wire Managers Type 105 Label Holder 8-Pair Block Type 105 Label Strip O r d e r i n g I n f o r m a t i o n Description Dimensions (HxWxD) Catalog Number HighBand ® 10 Block, Quantity: 1 HighBand ® 10 block HighBand ® 10 Block Tech Tip For proper wire management, use the wire management rings on both sides of the block. Pull half of the jumpers or patch cords to one side and the other half to the other side. When installing HighBand blocks, it is easier to begin wire termination at the bottom and work your way up the mounting hardware. 10-pair, pairs labeled 1 through 10 on face 0.88" x 4.88" x 1.63" 6468 2 061-00 of block; includes wire guides and jumper (22.2mm x 123.8mm x 41.3mm) rings. Three mounting options: snap onto universal mounting bracket in Type 105 position; a Type 105 mounting bracket; Type 105 rod mount bracket HighBand ® 10 Patch Cord Quantity: 2 6451 2 102-31 4-pair, for use where either patching or testing is required on lower side of a HighBand 10 module Length: 3.0 meters Color: Blue [...]... mounting hardware 14.75" x 8.25" x 5.25" (374.7mm x 209.6mm x 33.4mm) 6636 1 590-46 www.adc.com • +1-952-938-8080 • 1-800-366-3891 125 Copper Connectivity Solutions – Category 5e TrueNet® Structured Cabling HighBand® 10 Field Assembly Kits Copper Connectivity Solutions – Category 5e Modular Jacks ® TrueNet® Structured Cabling The K610 series jacks can be used in ADC’s modular patch panels Features • Available... 6467 5 195-22 • 102094AE K610 series jacks are an integral part of the TrueNet® channel solution Tuned together with other TrueNet Category 5e components and cable, K610 jacks help deliver zero bit error network performance 3/06 Copper Connectivity Solutions – Category 5e K610 Series Jacks www.adc.com • +1-952-938-8080 • 1-800-366-3891 126 .. .Copper Connectivity Solutions – Category 5e Termination Blocks ® 3/06 • 102094AE 300-pair HighBand® 10 field assembly kit 200-pair HighBand® 10 field assembly kit 200-pair HighBand® 10 field assembly kit Ordering Information . 9 1 Copper Connectivity Solutions – Category 5e Copper Connectivity Solutions – Category 5e Patch Panels Features • UL 1863 certified and Category 5e performance. 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 5e Copper Connectivity Solutions – Category 5e Introduction Mismatched Signal