Tài liệu Copper Connectivity Solutions – Category 6 ppt

3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 97 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 6 Copper Connectivity Solutions – Category 6 Introduction 96 Patch Panels 97 Termination Blocks 102 Patch Cords 107 Modular Jacks 111 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 98 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 6 ADC’s TrueNet ® Category 6 patch panels, patch cords, modular jacks, and cable form an end-to-end channel optimized to preserve signal amplitude and deliver zero bit error performance in Gigabit Ethernet applications. TrueNet patch panels are manufactured in 24-port (1RU) or 48-port (2RU) configurations to provide high-density modular patching solutions for all high-density applications where space is limited. The LSA-PLUS ® IDC technology provides a secure, reliable and gas-tight connection and allows for the wire to be terminated with either a KRONE insertion tool or a 110 termination tool. ADC Ultim8 ™ and HighBand ® 25 blocks provide unparalleled patching and testing capabilities that provide ultimate flexibility in deploying a network. HighBand 25 and Ultim8 blocks provide a cross- connection system with greater density, front side termination and fewer patch cords. There are multiple mounting options available to support both rack and wall mount application to maximize your telecommunications room real estate requirements. The Ultim8 and HighBand 25 blocks also feature a unique center port that acts as a test port to provide “look-both-ways” testing capability without the removal of any wire. This port also allows simple circuit monitoring through use of a test cord. TrueNet Category 6 products deliver exceptional system performance by including features that protect signal integrity and strength. The IEEE specifications for signal amplitude are especially important for Gigabit Ethernet (which uses multilevel encoding). In addition, these features may also enable lower voltage NIC cards to transmit a clean signal. TrueNet ® Category 6 solutions deliver: • A complete end-to-end channel • Extra bandwidth, better attenuation • Zero bit errors • ISO/IEC 11801, Class E compliance • Category 6 complia100 Copper Connectivity Solutions – Category 6 Introduction Hub Switch TrueNet ® Cable TrueNet ® Patch Cord TrueNet ® Patch Cord KM8 Jacks Category 6 Patch Panel TrueNet ® Category 6 RJ45 Modular Solution Hub Switch TrueNet ® Cable TrueNet ® Patch Cord TrueNet ® Patch Cord KM8 Jacks HighBand ® Ultim8 ™ Blocks TrueNet ® Category 6 IDC Block Solution Mismatched Signal Amplitude The mismatched channel allows signal amplitude to fall out of IEEE specifications. TrueNet ® Signal Amplitude The TrueNet channel preserves signal amplitude within IEEE specifications. Time Volts Time Volts 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 99 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 6 Copper Connectivity Solutions – Category 6 Patch Panels TrueNet ® Category 6 patch panels feature impedance matching for maximum performance. Designed for mounting in standard EIA 19-inch racks or to hinged wall mount brackets, their high density, superior reliability and numerous labeling options make these patch panels a superior choice for high-performance networks. Features and Benefits • UL certified and verified • Performance exceeds TIA/EIA Category 6 requirements • Designed to support Gigabit Ethernet transmission speeds • Includes rear wire manager • Wire can be terminated with either a KRONE or 110 tool • 45 degree silver-plated IDCs provide secure, reliable gas-tight connection • Includes paper labels or silk-screened area for station identification • Universal wiring label for easy termination of either T568A/B ® 24-port Category 6 patch panel A/B 48-port Category 6 patch panel A/B 24-port Category 6 patch panel, paper labels A/B 48-port Category 6 patch panel, paper labels A/B TrueNet ® Patch Panels Ordering information follows on the next page 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 100 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 6 O r d e r i n g I n f o r m a t i o n Description Dimensions (HxWxD) Catalog Number 24-port silk-screened, T568A/B compatible Quantity: 1 48-port silk-screened, T568A/B compatible Quantity: 1 24-port patch panel with snap-in port ID tabs and paper labels, T568A/B compatible Quantity: 1 48-port patch panel with snap-in port ID tabs and paper labels, T568A/B compatible Quantity: 1 Blank panels Used to cover open rack space in 19" rack; rolled steel construction; durable powder coated finish Quantity: 1 1RU 2RU 6-port mini patch panel, Type 568A/B; mounts on UMS bracket, Type 105 rod mount or Type 105 back mount frame Quantity: 1 1.75" x 19" x 1.5" (44.45mm x 482.6mm x 38.1mm) 3.5" x 19" x 1.5" (88.9mm x 482.6mm x 38.1mm) 1.75" x 19" x 1.5" (44.45mm x 482.6mm x 38.1mm) 3.5" x 19" x 1.5" (88.9mm x 482.6mm x 38.1mm) 1.75" x 19" x 0.25" (44.45mm x 482.6mm x 6.35mm) 3.5" x 19" x 0.25" (88.9mm x 482.6mm x 6.35mm) 1.73" x 4.77" x 2.08" (43.94mm x 121.16mm x 52.83mm) 6653 1 677-24 6653 1 677-48 6653 1 679-24 6653 1 679-48 6653 2 000-01 6653 2 000-02 6653 1 608-00 Copper Connectivity Solutions – Category 6 Patch Panels ® TrueNet ® Patch Panels 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 101 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 6 Copper Connectivity Solutions – Category 6 Patch Panels Dynamic Angle Right/Left Patch Panels The TrueNet ® dynamic angle right/left panel offers superior performance and flexibility. Unlike fixed angle right/angle left panels, ADC’s patented solution combines the ability to dynamically angle connections either right or left in a low profile. Forty-five degree silver plated IDCs can be punched down with either a standard 110 or KRONE termination tool. Features • Patented angle right/left eases stress on patch cords allowing for improved cable management • Low profile dynamic angling allows for greater flexibility and use in cabinet envi- ronments • UL 1863 certified and Category 6 performance verified • Conductors can be terminated with either a KRONE or 110 tool • 45 degree silver-plated IDCs provide secure, reliable gas-tight connection • Includes adhesive paper labels for station identification • Universal wiring label for easy termination of either T568A/B • Patch panels are designed to support Gigabit Ethernet transmission speeds • Panels can be rack mounted in standard EIA 19-inch racks or wall mounted using optional 19-inch hinged wall mount brackets • Optional rear cable manager available O r d e r i n g I n f o r m a t i o n Description Dimensions (HxWxD) Catalog Number 24-port angle right/left patch panel, 1.75" x 19" x 1.5" PP24AC6T T568A/B compatible Quantity: 1 (44.45mm x 482.6mm x 38.1mm) 48-port angle right/left patch panel, 3.5" x 19" x 1.5" PP48AC6T T568A/B compatible Quantity: 1 (88.9mm x 482.6mm x 38.1mm) Rear cable management bar 1.75" x 19" x 4" ADCCMR-A (44.45mm x 482.6mm x 101.6mm) Label holder ADCLH-A Adhesive-backed, clear top loading label holder Labels ADCLC-A Sheet (8.5" x 11") of label cards ID tabs (icons) ADCICBXX* Quantity: 25 per bag *Replace XX with: 03 = Red 05 = Blue 09 = Yellow 11 = Brown 04 = Green 08 = Orange 10 = Purple ® 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 102 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 6 Plug ‘n’ Play Patch Panels Copper Connectivity Solutions – Category 6 Patch Panels Part of ADC’s high performance line of modular products, these blank patch panels accept all the modular jacks and connectors available for ADC’s station outlets. The patch panels are designed to mount in standard EIA 19-inch (482.6mm) racks. 24-port high-density Plug ‘n’ Play patch panel with 6-port increments Patch Plus 24-port, six 4-port increments (front) 12-port mini patch panel 24-port high-density Plug ‘n’ Play patch panel with 4-port increments 48-port high-density Plug ‘n’ Play patch panel with 4-port increments Ordering information follows on the next page 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 103 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 6 O r d e r i n g I n f o r m a t i o n Description Dimensions (HxWxD) Catalog Number 24-port Patch Plus panel 3.5" x 19" x 1.5" 6653 2 760-24 Quantity: 1 (88.9mm x 482.6mm x 38.1mm) Attaches to wall mount brackets or standard TIA/EIA racks. Includes wire management on front and back; compatible with both KM8 and K610 jacks. Includes station, workstation and panel identification labeling capabilities High-density Plug ‘n’ Play patch panel Quantity: 1 Includes rear cable management. Front of panel is silk-screened with port numbers and label area. Adhesive labels for laser printing also available (contact ADC Technical Assistance Center) 24-port panel, 4-port increments 1.75" x 19" x 6" 6653 2 102-24 (44.45mm x 482.6mm x 152.4mm) 48-port panel, 4-port increments 3.5" x 19" x 6" 6653 2 102-48 (88.9mm x 482.6mm x 152.4mm) 24-port panel, 6-port increments 1.75" x 19" x 6" 6653 2 104-24 (44.45mm x 482.6mm x 152.4mm) 12-port mini patch panel 10" x 2.75" x 1.88" 6653 2 705-12 Quantity: 1 (254mm x 69.85mm x 47.8mm) Blank mini patch panels accept all modular jacks and connectors available for ADC’s station outlets. Includes (1) 89D bracket Label sheets for 4-port increment 6631 3 046-08 panels Quantity: 1 sheet Contains labels for 4-port Fascia, 4-port Patch Plus, Plug ‘n’ Play Patch Plus Plug ‘n’ Play Patch Panels Copper Connectivity Solutions – Category 6 Patch Panels 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 104 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 6 Features • UL certified • Performance exceeds TIA/EIA Category 6 • Designed to support Gigabit Ethernet transmission speeds • A test port provides “look-both-ways” testing capability without the removal of any wires; also allows simple circuit monitoring through use of a test cord • Provide unique patch-by-exception functionality O r d e r i n g I n f o r m a t i o n Description Dimensions (HxWxD) Catalog Number Ultim8 ™ block Quantity: 1 8-pair; color-coding for station pairs printed on face of block. Includes wire guides and jumper rings. Three mounting options: snap onto universal mounting bracket in Type 105 position; a Type 105 mounting bracket; Type 105 rod mount bracket 0.88" x 4.88" x 1.63" (22.5mm x 124mm x 41.4mm) 6468 2 060-06 Ultim8 ™ block ® Adjustable Mounting Bracket (in Type 105 position) Horizontal Wire Managers Type 105 Label Holder 8-Pair Block Type 105 Label Strip Copper Connectivity Solutions – Category 6 Termination Blocks Ultim8 ™ Termination Blocks Tech Tip Patch-by-exception improves performance and aesthetics. The advantages of HighBand ® 25 and Ultim8 ™ blocks provide a cross-connection system with greater density, front side termination and fewer patch cords. To learn more about patch-by-exception, contact ADC Technical Support. 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 105 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 6 O r d e r i n g I n f o r m a t i o n Description Dimensions (HxWxD) Catalog Number Ultim8 ™ field assembly kit Quantity: 1 96-pair Ultim8 ™ kit with UMS 160-pair Ultim8 ™ kit 96-pair (24-port) Supports field termination of (24) 4-pair cables. Includes (12) Ultim8 blocks, (2) horizontal wire managers, (1) black or gray universal mounting bracket and (1) Type 105 label holder with label and protective cover 96-pair (24-port) kit; including black universal mounting kit 96-pair (24-port) kit; including gray universal mounting kit 160-pair Supports field termination of (40) 4-pair cables. Includes (20) Ultim8 blocks, (1) Type 105 label holder, (1) 21-position Type 105 back mount frame, protective rubber grommets for rear cable entry holes on back mount frame 168-pair Supports field termination of (40) 4-pair cables. Includes (21) Ultim8 blocks, (1) 21-position Type 105 back mount frame, protective rubber grommets for rear cable entry holes on back mount frame. No label holder 14.75" x 8.25" x 5.25" (374.7mm x 209.6mm x 33.4mm) 18.44" x 4.25" x 3.81" (468.3mm x 107.9mm x 96.8mm) 18.44" x 4.25" x 3.81" (468.3mm x 107.9mm x 96.8mm) 6636 1 596-46 6636 1 596-06 6636 1 510-06 6636 1 518-06 Copper Connectivity Solutions – Category 6 Termination Blocks ® Ultim8 ™ Field Assembly Kits 3 / 0 6 • 1 0 2 0 9 4 A E TrueNet ® Structured Cabling 106 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Copper Connectivity Solutions – Category 6 Complete 300-pair HighBand ® 25 system includes back mount frame and HighBand 25 blocks with rear cable managers, patch cords, cable management rings and covers (single on left side, dual on right side) and a cable trough added below HighBand ® 25 block rear cable manager HighBand ® 25 label holder (shown mounted on block) HighBand ® 25 back mount frame ® Features and Benefits • UL certified • 25-pair blocks for voice and data applications (first 24 pair for data) • Performance exceeds TIA/EIA Category 6 requirements • A test port provides “look-both-ways” testing capability without the removal of any wires; also allows simple circuit monitoring through use of a test cord • Features disconnect contacts providing unique patch-by-exception functionality and improved administration • Available as individual components or in complete systems, consisting of unique wire termination blocks, cable managers, patch cords, mounting frames, label holders and covers Copper Connectivity Solutions – Category 6 Termination Blocks HighBand ® 25 Termination Blocks Ordering information follows on the next page Tech Tip When installing HighBand ® 25 blocks, it is easier to begin wire termination at the bottom and work up the mounting hardware. [...]... plug, T 568 B Quantity: 1 RJ45 plug (T 568 B) RJ45 plug (T 568 B) RJ45 plug to RJ45 plug, T 568 A Quantity: 1 RJ45 plug (T 568 A) RJ45 plug (T 568 A) RJ45 plug to RJ45 plug, crossover wired, Quantity: 1 RJ45 plug (T 568 B) RJ45 plug (T 568 A) Catalog Number* 66 45-2-781-XX 66 45-2-784-XX 66 45-2-787-XX 66 45-2-782-XX 66 45-2-780-XX 66 45-2-783-XX 66 45-2-771-XX 66 45-2-774-XX 66 45-2-777-XX 66 45-2-772-XX 66 45-2-770-XX 66 45-2-773-XX... 66 45-2-773-XX 66 45-2-791-XX 66 45-2-794-XX 66 45-2-797-XX 66 45-2-792-XX 66 45-2-790-XX 66 45-2-793-XX * eplace XX with: R 04 = 4' 07 = 7' 10 = 10' 15 = 15' 25 = 25' 50 = 50' Contact ADC for additional cable colors and lengths www.adc.com • +1-952-938-8080 • 1-800- 366 -3891 109 Copper Connectivity Solutions – Category 6 TrueNet® Structured Cabling ® Copper Connectivity Solutions – Category 6 Patch Cords... 4RU—300-pair 64 50 1 1 76- 00 64 50 1 177-00 64 50 1 178-00 • 102094AE TrueNet® Structured Cabling Description 3/ 06 Copper Connectivity Solutions – Category 6 HighBand® 25 Termination Blocks www.adc.com • +1-952-938-8080 • 1-800- 366 -3891 108 Copper Connectivity Solutions – Category 6 Patch Cords 3/ 06 • 102094AE Patch Cords Impedance matched for use in TrueNet® structured cabling systems, these patch cords exceed Category. .. rear 3/ 06 Copper Connectivity Solutions – Category 6 HighBand® 25 Patch Cords 64 51 2 701-XX 4-pair to RJ45 568 A rear 64 51 2 700-XX 1-pair to 1-pair front 64 51 2 702-XX 4-pair to 4-pair front 64 51 2 703-XX 4-pair to RJ45 568 A front 64 51 2 704-XX 4-pair to RJ45 568 B front 64 51 2 7 06- XX * eplace XX with: R 10 = 4' 20 = 7' 30 = 10' 40 = 15' www.adc.com • +1-952-938-8080 • 1-800- 366 -3891 112 Copper Connectivity. .. T 568 B Quantity: 1 TP6TB0BLXX Red R T R T R T R T TP6TB0WTXX Blue Pair No TP6TH-GYXX White Ultim8 plug to RJ45 plug, T 568 A Quantity: 1 TP6TH-YLXX Gray TP6TB-GYXX * eplace XX with: R 04 = 4' 07 = 7' 10 = 10' 15 = 15' 25 = 25' 50 = 50' Contact ADC for additional cable colors and lengths www.adc.com • +1-952-938-8080 • 1-800- 366 -3891 110 Copper Connectivity Solutions – Category 6 Patch Cords Copper Connectivity. .. 1.7" x 8.5" x 4.5" (43.2mm x 215.9mm x 114.3mm) 64 68 5 300-00 HighBand 25 25-pair block systems Ordering information continues on the next page 3/ 06 • 102094AE TrueNet® Structured Cabling ® www.adc.com • +1-952-938-8080 • 1-800- 366 -3891 107 Copper Connectivity Solutions – Category 6 HighBand® 25 Termination Blocks Copper Connectivity Solutions – Category 6 Termination Blocks Ordering Information Dimensions... TP6TH-WTXX Blue TP6TH-BLXX Red TP6TH-RDXX Pair No Green TP6TH-GNXX Pair 4 Pair 3 Pair 2 Pair 1 R T R T R T R T Yellow RJ45 Plug Pin # 8 7 2 1 6 3 4 5 Pair 4 Pair 3 Pair 2 Pair 1 RJ45 Plug Pin # 8 7 2 1 6 3 4 5 Pair 4 Pair 3 Pair 2 Pair 1 TP6TB0YLXX Gray TP6TB0GYXX White TP6TB-WTXX Blue TP6TB-BLXX Red TP6TB-RDXX Green TP6TB-GNXX Yellow TP6TB-YLXX Gray R T R T R T R T TP6TB0GNXX Yellow Pair No TP6TB0RDXX Green... jack Quantity: 1 68 30 1 830-XX KM8 RJ45 modular tool-less jack Quantity: 1 68 30 1 800-XX *Replace XX with: 01 = White 02 = Ivory 03 = Gray 04 = Black 05 = Red 06 = Blue www.adc.com 07 08 09 10 22 • = = = = = Green Yellow Purple Orange Electrical ivory +1-952-938-8080 • 1-800- 366 -3891 113 Copper Connectivity Solutions – Category 6 ® www.adc.com • +1-952-938-8080 • 1-800- 366 -3891 114 3/ 06 • 102094AE TrueNet®... management rings and (3) dual covers 61 .8" x 8 .62 " x 8 .6" (1 569 .7mm x 219mm x 218.5mm) 64 50 1 104-00 HighBand 25 block with rear cable manager Color-coded; terminates (6) 4-pair Category 6 cables Rear cable manager simplifies installation; incoming cables routed through slots and held securely by built-in clips Quantity: 12 1.7" x 8.5" x 4.5" (43.2mm x 215.9mm x 114.3mm) 64 68 5 60 0-00 HighBand 25 25-pair voice... blocks KRONE TrueNet® Structured Cabling Ultim8™ 1- and 2-Pair Patch Cords www.adc.com • +1-952-938-8080 • 1-800- 366 -3891 111 Copper Connectivity Solutions – Category 6 Patch Cords TrueNet® Structured Cabling HighBand® 25 patch cord, 4-pair and 1-pair Features • Meets TIA/EIA Category 6 component specifications • Available in 4-pair to 4-pair or 4-pair to RJ45 configurations •  Directed to rear or . x 107.9mm x 96. 8mm) 66 36 1 5 96- 46 66 36 1 5 96- 06 66 36 1 510- 06 66 36 1 518- 06 Copper Connectivity Solutions – Category 6 Termination. 121.16mm x 52.83mm) 66 53 1 67 7-24 66 53 1 67 7-48 66 53 1 67 9-24 66 53 1 67 9-48 66 53 2 000-01 66 53 2 000-02 66 53 1 60 8-00 Copper Connectivity Solutions