Tài liệu Lab B: Installing MMS Compass pdf

Lab B: Installing MMS Compass Objectives After completing this lab, you will be able to install MMS Compass. Lab Setup To complete this lab, you need the following: ! A computer running Windows 2000 Server configured as a primary domain controller. ! MMS Server installed. ! An assigned fully qualified domain name (FQDN). Your assigned FQDN is computer_name.domain.nwtraders.msft. For example, if your computer name is Vancouver, then your FQDN is Vancouver.vancouverdom.nwtraders.msft. Estimated time to complete this lab: 15 minutes 2 Lab B: Installing MMS Compass BETA MATERIALS FOR MICROSOFT CERTIFIED TRAINER PREPARATION PURPOSES ONLY Exercise 1 Installing MMS Compass Scenario Now that you have successfully installed MMS Server, you will install MMS Compass so that you can access the MMS Server. Goal In this exercise, you will install the MMS Compass client. Task Detailed Steps 1. Connect to MMS Server by using Microsoft Internet Explorer and install MMS Compass. a. Log on as administrator with a password of password. b. In the Run dialog box, type http://fqdn:81 (where fqdn is the fully qualified domain name of your computer), and then click OK. Microsoft Internet Explorer opens the Microsoft Metadirectory Services home page. c. Click Install MMS Compass. d. In the File Download dialog box, click Run this program from its current location, and then click OK. e. In the Security Warning dialog box, click Yes. f. On the Introduction page, click Next. g. On the Determine Installation Drive and Directory page, click Next. The MMS Compass installation program installs the MMS Compass client files. h. Close the Microsoft Metadirectory Services window. i. On the Setup Complete page, click Finish. j. Close Microsoft Internet Explorer. Lab B: Installing MMS Compass 3 BETA MATERIALS FOR MICROSOFT CERTIFIED TRAINER PREPARATION PURPOSES ONLY Exercise 2 Configuring MMS Compass to Connect to MMS Server Scenario Now that you have installed MMS Compass, you need to configure it to connect to your MMS Server. Goal In this exercise, you will configure MMS Compass to connect to your MMS Server. Tasks Detailed Steps 1. Start MMS Compass and configure it to connect to your MMS Server by using the following parameters: Login parameters: • Name: computer_name@fqdn (where computer_name is your assigned computer name and fqdn is your assigned fully qualified domain name. • Password: computer_name. • Server parameters: • Name: computer_name. • Host name or address: fqdn. • Port: 390 a. On the Desktop, double-click MMS Compass. b. In the Login dialog box, in the Name list, type computer_name@fqdn (where computer_name is your assigned computer name and fqdn is your assigned fully qualified domain name). c. In the Password box, type computer_name and then click OK. d. In the Configure Servers dialog box click New. e. In the Name box, type computer_name in the Host Name or Address box, type fqdn in the Port box, type 390 click Apply, and then click OK. f. In the Servers dialog box click OK. Note: MMS Compass opens. Notice that the title bar indicates that you are logged in as the Administrator. 1. continued g. Leave MMS Compass open. 4 Lab B: Installing MMS Compass BETA MATERIALS FOR MICROSOFT CERTIFIED TRAINER PREPARATION PURPOSES ONLY Exercise 3 Configuring the Administrator Entry In this exercise, you will use MMS Compass to change the password and the email address for the Administrator entry Scenario Now that you have installed and configured MMS Compass, you need to change the email address for the Administrator entry to match your own email address. Additionally, you need to change the password for the Administrator entry. Tasks Detailed steps 1. Change the password for the Administrator entry from computer_name to password. a. In the action pane of MMS Compass, click Bookmarks, click Home, and then click Administration. b. On the Operational tab, in the New password box, type password and then click OK. c. In the Change Password dialog box, in the Confirm New Password for user Password box, type password. d. In the Enter the password you logged in with box, type computer_name. 2. Change the email address for the Administrator entry to mmsadmin@nwtraders.msf t a. In the action pane, click Properties. b. In the Administrator dialog box, on the General tab, in the Email box, type mmsadmin@nwtraders.msft and then click OK. c. Close MMS Compass. 3. Confirm that the changes were successful by logging on to your MMS Server using the new email address and password. a. Start MMS Compass, log on to your MMS server as mmsadmin@nwtraders.msft with a password of password. b. Close all windows, and then log off. . Lab B: Installing MMS Compass Objectives After completing this lab, you will be able to install MMS Compass. Lab Setup To complete this lab, . this lab: 15 minutes 2 Lab B: Installing MMS Compass BETA MATERIALS FOR MICROSOFT CERTIFIED TRAINER PREPARATION PURPOSES ONLY Exercise 1 Installing