Tài liệu Lab B: Creating Templates to Import Data into the Metadirectory pptx

Lab B: Creating Templates to Import Data into the Metadirectory Objectives After completing this lab, you will be able to: ! Create and configure an instance of the Generic management agent to integrate information from a data source (for which there is no predefined MA) into the metadirectory. ! Use template language to create Parsing and Construction templates to import the connected directory data into the metadirectory. Prerequisites Before working on this lab, you must have: ! Knowledge about attribute flow rules. ! Experience joining connector namespace entries with metaverse entries. ! Experience operating management agents. ! Knowledge about logging levels. ! Knowledge about connector namespace holograms. Lab Setup To complete this lab, you need the following: ! MMS Server and MMS Compass installed. ! The metaverse namespace populated with Microsoft Exchange Server 5.5 entries. Estimated time to complete this lab: 30 minutes 2 Lab B: Creating Templates to Import Data into the Metadirectory BETA MATERIALS FOR MICROSOFT CERTIFIED TRAINER PREPARATION PURPOSES ONLY Exercise 1 Creating a Generic Management Agent In this exercise, you will create an instance of the Generic management agent and edit the MA control script to connect to the SQL Server and create an import file with the employee's telephone numbers. Scenario At Northwind Traders, a Microsoft SQL Server ™ database stores employee telephone numbers, which need to be integrated into the metaverse. To perform the integration, you must create an import file. Tasks Detailed Steps 1. Log on to Windows 2000, start MMS Compass, and then log on to your MMS server. a. Log on to Windows 2000 as Administrator with a password of password. b. Start MMS Compass, and then log on to your MMS server as mmsadmin@nwtraders.msft with a password of password. 2. Create an instance of the Generic management agent called Telephone Number MA and configure it to run in association mode. a. On the control pane of MMS Compass, click Bookmarks, click Management Agents, and then click Create New Management Agent. b. In the Create Management Agent dialog box, in the Name of the Management Agent box, type Telephone Number MA and in the Type of the Management Agent box, click Generic Management Agent, and then click Create. c. In the Configure Management Agent dialog box, on the Connected Directory Specifics tab, on the Mode and Namespace Management tab, under Management Agent Mode, click Association, and then click OK. 3. Copy the cdir_oledb.vbs script from c:\moc\2062a\labfiles folder to the working folder of the Telephone Number MA. a. In the directory pane, right-click Telephone Number MA, and then click Properties. b. In the Management Agent Properties dialog box, display the Intermediate Files and Logs tab. What is the management agent’s working directory for the Telephone Number management agent? c:\zoomserv\Data\ds\ nnnnnnnn (where nnnnnnnn is a number). 3. (continued) c. Click OK to close the Management Agent Properties dialog box. d. Copy the file c:\moc\2062a\labfiles\cdir_oledb.vbs to the management agent’s working directory. Lab B: Creating Templates to Import Data into the Metadirectory 3 BETA MATERIALS FOR MICROSOFT CERTIFIED TRAINER PREPARATION PURPOSES ONLY Tasks Detailed Steps 4. Configure Notepad.exe as the Compass script editor. a. In the control pane, click Design MA. b. In the Design MA dialog box, on the Control MA Operations tab, on the MA Control Script tab, right-click in the data box, and then click Manage Editor. c. In the Manage editor dialog box, in the Path of the executable box, type notepad.exe select the Set as default editor check box, click Add, and then click OK. 5. Modify the MA control script to use the Visual Basic custom discovery procedure. a. On the MA Control Script tab, right-click in the data box, and then click Edit. b. In Notepad, find the script block for %zcMAProcessUsers%. In this script block, replace the series of echo statements between the asterisks with the following line. EXECUTE cmd /c cscript !%zcDSDirectory%\cdir_oledb.vbs !/action:discovery /debug:%zcDSMALoggingLevel% Note: The previous text must be typed on one line. c. Save and then close Notepad. d. Click OK to close the Design MA dialog box. 6. Operate the MA to only discover the users in the SQL server database. a. In the control pane, click Operate MA. b. In the Operate the Management Agent dialog box, on the Operational Settings tab, on the When Running the Management Agent tab, under Tasks to Run, clear the Update the metadirectory check box, ensuring that only the Discover Connected Directory check box is selectted. c. Under Types of Objects to Process, clear the Process Organizing Structures check box, ensuring that only the Process Users check box is selected. d. On the Management Agent Logs tab, display the Operator’s Log tab. e. Click Run the Management Agent. The Operator's Log displays a message indicating that 1000 entries were discovered. f. Click OK to close the Operate the Mangement Agent dialog box. 4 Lab B: Creating Templates to Import Data into the Metadirectory BETA MATERIALS FOR MICROSOFT CERTIFIED TRAINER PREPARATION PURPOSES ONLY Exercise 2 Updating the Connector Namespace Scenario At Northwind Traders, a SQL server database stores the employee telephone numbers. This information needs to be integrated into the metaverse namespace. A connection has already been established by using a custom discovery script, and an import file has already been created. The connector namespace needs to be updated with the information in the import file. Goal In this exercise, you will analyze the record format of the import file and create Parsing and Connector Namespace templates to populate the connector namespace with the employee's telephone numbers. Tasks Detailed Steps 1. Analyze the record format by reviewing the import file. a. In Notepad, open the file called import with no extension located in the working directory of the MA. What type of format does this data set represent? Label/value pairs. 2. Create an Add Parsing template to parse the records in the import file. a. In the directory pane of MMS Compass, ensure that Telephone Number MA is selected, and then in the control pane, click Design MA. b. In the Design MA dialog box, on the Control Metadirectory tab, on the Parsing Templates tab, on the Add tab, right-click in the data box, and then click Edit. c. Copy the first record set from the import file and paste it into the Notepad window for the Add script. d. Replace all the attribute values with variables as follows: Record: $dummy Employee_ID: $cd.uid Name: $cd.cn Title: $cd.title Phone: $cd.telephoneNumber Fax: $cd.facsimileTelephoneNumber Mobile: $cd.mobile Pager: $cd.pager Note: There must be no spaces after the variables. 1. (continued) e. Save the document, and then close the Notepad window for the Add script. Lab B: Creating Templates to Import Data into the Metadirectory 5 BETA MATERIALS FOR MICROSOFT CERTIFIED TRAINER PREPARATION PURPOSES ONLY Tasks Detailed Steps 3. Create a Connector Namespace Construction template to construct the distinguished name and the object class. a. In the Design MA dialog box, on the Control Metadirectory tab, on the Construction Templates tab, on the Connector Space tab, right- click in the data box, and then click Edit. b. In the Notepad window, create the DN entry by typing the following: $cs.dn = uid=$cd.uid,$MA() c. In the Notepad window, assign an object class of zcAliasThing to the entry by typing the following: $cs.zcoc = zcAliasThing d. Save the document, close the Notepad window containing the connector namespace construction template, and then click OK to close the Design MA dialog box. 4. Operate the management agent and verify that the entries were created in the connector namespace. a. In the control pane, click Operate MA. b. In the Operate the Management Agent dialog box, on the Operational Settings tab, on the When Running the Management Agent tab, under Tasks to Run, clear the Discover Connected Directory check box, and then select the Update the metadirectory check box. c. On the Management Agent Logs tab, display the Operator’s Log tab. d. Click Run the Management Agent. The Operator's log indicates that 1000 disconnectors were added. e. Click OK to close the Operate the Management Agent dialog box. f. In the directory pane, expand Telephone Number MA, and then click the first entry AU0002288. g. In the control pane, click View Hologram. h. In the Hologram Attributes dialog box, note that the attributes and their values are now in the connector namespace, and then click OK. 6 Lab B: Creating Templates to Import Data into the Metadirectory BETA MATERIALS FOR MICROSOFT CERTIFIED TRAINER PREPARATION PURPOSES ONLY Exercise 3 Updating the Metaverse Namespace Scenario At Northwind Traders, a SQL server database stores the employee telephone numbers. This information needs to be integrated into the metaverse namespace. A connection has already been established by using a custom discovery script, and an import file has already been created. The Parsing and Connector Namespace Construction templates have also been created. The employee telephone numbers are already in the connector namespace. The metaverse namespace needs to be updated with the information from the connector namespace and joined with the existing metaverse namespace entries. Goal In this exercise, you will create the Metaverse Construction template and then join the connector namespace entries with the existing metaverse namespace entries. Tasks Detailed Steps 1. Create the Metaverse Construction template by assigning the DN, object class, and all telephone number attributes. a. In the directory pane of MMS Compass, click Telephone Number MA, and then in the control pane, click Design MA. b. In the Design MA dialog box, on the Control Metadirectory tab, on the Construction Templates tab, on the Metaverse tab, right-click in the data box, and then click Edit. c. Create the DN for the entry by typing the following: $mv.dn = cn=$cd.cn,$MA($zcMAUNSBase) d. Assign an object class by typing the following: $mv.zcoc = zcPerson e. Assign attributes for all telephone numbers in the connector namespace entry by typing the following: $mv.telephoneNumber = $cd.telephoneNumber $mv.facsimileTelephoneNumber = !$cd.facsimileTelephoneNumber $mv.mobile = $cd.mobile $mv.pager = $cd.pager f. Save and close the Metaverse Construction template. g. Click OK to close the Design MA dialog box. 2. Test the Metaverse Construction template by running the MA on only the first five entries. a. In the control pane, click Operate MA. b. In the Operate the Management Agent dialog box, on the Operational Settings tab, on the Limits tab, in the Process a maximum of box, type 5 c. On the Management Agent Logs tab, display the Operator’s Log tab. d. Click Run the Management Agent. The Operator's log displays that 5 entries were processed. Lab B: Creating Templates to Import Data into the Metadirectory 7 BETA MATERIALS FOR MICROSOFT CERTIFIED TRAINER PREPARATION PURPOSES ONLY Tasks Detailed Steps 3. Join the Telephone Number MA connector namespace entries into the metaverse. a. On the Operational Settings tab, on the Limits tab, delete the value in the Process maximum of box. b. On the Operational Settings tab, on the Logging tab, under Logging Details, in the Logging detail level box, select 2, and then click OK. c. In the control pane, click Join. d. In the Server-Based Join dialog box, on the Configure the join tab, in the Search using these attributes box, type the following: $cd.uid e. Click OK to close the Server-Based Join dialog box. 4. Configure Attribute Flow rules and update the telephone numbers in the metaverse with the SQL server data. a. In the control pane pane, click Attribute Flow. b. In the Configure Attribute Flow dialog box, on the General Attribute Flow tab, under Metadirectory Attributes, click When the metaverse attribute can be constructed from the connected directory, and then click OK. c. In the control pane, click Operate MA. d. In the Operate the Management Agent dialog box, on the Management Agent Logs tab, display the Operator’s Log tab. e. Click Run the Management Agent. The Operator's log displays the results of the management agent process . f. Click OK to close the Operate the Management Agent dialog box. g. At the top of the directory pane, click The Known Universe. h. In the directory pane, click Aarika Quek under Accounting, and then in the control pane, click Properties. i. In the Aarika Quek dialog box, click the Office tab Notice that Aarika's has telephone numbers. j. Click OK to close the Aarika Quek dialog box. 5. Close MMS Compass, and then log off of Windows 2000. a. Close MMS Compass, and then close any open windows. b. Log off of Windows 2000. THIS PAGE INTENTIONALLY LEFT BLANK . entries. Estimated time to complete this lab: 30 minutes 2 Lab B: Creating Templates to Import Data into the Metadirectory BETA MATERIALS FOR. f. Click OK to close the Operate the Mangement Agent dialog box. 4 Lab B: Creating Templates to Import Data into the Metadirectory BETA MATERIALS