Mechanical & Environmental Characteristics 4-12 Fibers 18-24 Fibers Crush Resistance (EIA-FOTP-41A): 1500 N/cm 1500 N/cm Impact Resistance (EIA-FOTP-25A): 1000 impacts 1000 impacts Flexing (EIA-FOTP-104A): 1000 cycles 1000 cycles Maximum Pulling Load (EIA-FOTP-33A): 1000 Newtons 1800 Newtons (224 lbs.) (403 lbs.) Maximum Safe Operating Load: 600 Newtons 1000 Newtons (134 lbs.) (224 lbs.) Minimum Bend Radius: At Max. Load: 20 x cable O.D. 20 x cable O.D. Unloaded: 10 x cable O.D. 10 x cable O.D. Maximum Vertical Rise: 325 meters 325 meters Fiber Proof Test: 100 KPSI 100 KPSI Operating Temperature: -40°C to +70°C -40°C to +70°C Storage Temperature (non-flexing): -40°C to +70°C -40°C to +70°C Installation Temperature: 0°C to +70°C 0°C to +70°C *6- to 72-Fiber Optical Specifications Max. Typical Guaranteed Core Clad Atten. Atten. Min. Dia. Dia. Numerical Fiber Type (dB/km) (dB/km) Bandwidth (Microns) (Microns) Aperture 50/125 Multimode 3.5/1.5* 2.6/0.6* 400/400* 50 ± 3 125 ±2 0.200 ± 0.015 62.5/125 FDDI Multimode 3.5/1.5* 2.7/0.75* 160/500* 62.5 ± 3 125 ± 2 0.275 ± 0.015 62.5/125 Gigabit Multimode 3.5/1.5* 2.7/0.75* 200/500* 62.5 ± 3 125 ± 2 0.275 ± 0.015 100/140 Multimode 6.0/3.0* 4.5/2.0* 100/100* 100 + 3 140 + 4 0.290 ± 0.020 Single-mode 1.0/1.0** 0.35/0.35** Mode Field 9.3 ± 0.5 125 ± 2 0.13 (SMF-28) Diameter @1300nm * Attenuation and Bandwidth values for Multimode: 850nm/1300nm ** Attenuation and Bandwidth values for Single-mode: 1310nm/1550nm FIBER OPTIC SOLUTIONS Tight-Buffered, Low-Smoke, Zero-Halogen Jacketed Features: ■ Available in single-mode as well as 50 and 62.5 µm multimode versions ■ Excellent crush, cut and abrasion resistance ■ Available with 4–24 fibers ■ Excellent flame retardancy (UL Listed OFNR/OFCR) ■ UV stable jacket ■ Flexible design/easy to install ■ Color-coded buffered fibers ■ All cables tested to EIA/TIA FOTP standards Benefits: ■ Saves time, labor; ideal for direct connectorization. ■ Pull and terminate; no need to splice at building entrance. ■ Ideal for installation in conduits between buildings (non-armored) ■ Offers a convenient alternative to PVC riser cables ■ Armored version available for rodent resistance INDOOR/OUTDOOR CABLES Cable and Jacket Specifications and Ordering Information Cable Cable Cable No. of UL Diameter Weight Jacket Part Number Type Fibers Type (in) (mm) (Nom. lbs./km) Type 7004LZHIOCXXX Distribution 4 OFNR (Riser) 0.235 6.0 90 Low Smoke Zero Halogen 7006LZHIOCXXX Distribution 6 OFNR (Riser) 0.240 6.1 90 Low Smoke Zero Halogen 7008LZHIOCXXX Distribution 8 OFNR (Riser) 0.280 7.1 125 Low Smoke Zero Halogen 7012LZHIOCXXX Distribution 12 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen 7018LZHIOCXXX Distribution 18 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen 7024LZHIOCXXX Distribution 24 OFNR (Riser) 0.370 9.4 215 Low Smoke Zero Halogen 7004LZHBKOXXX Breakout 4 OFNR (Riser) 0.365 9.3 200 Low Smoke Zero Halogen 7006LZHBKOXXX Breakout 6 OFNR (Riser) 0.450 11.4 310 Low Smoke Zero Halogen 7008LZHBKOXXX Breakout 8 OFNR (Riser) 0.500 12.7 380 Low Smoke Zero Halogen 7012LZHBKOXXX Breakout 12 OFNR (Riser) 0.665 16.9 680 Low Smoke Zero Halogen 7018LZHBKOXXX Breakout 18 OFNR (Riser) 0.640 16.3 600 Low Smoke Zero Halogen 7024LZHBKOXXX Breakout 24 OFNR (Riser) 0.720 18.3 730 Low Smoke Zero Halogen 7004LZHBKAXXX Armored Breakout 4 OFCR (Riser) 0.650 16.5 825 Low Smoke Zero Halogen 7006LZHBKAXXX Armored Breakout 6 OFCR (Riser) 0.675 17.2 935 Low Smoke Zero Halogen 7008LZHBKAXXX Armored Breakout 8 OFCR (Riser) 0.785 19.9 1170 Low Smoke Zero Halogen 7012LZHBKAXXX Armored Breakout 12 OFCR (Riser) 0.850 21.6 1440 Low Smoke Zero Halogen 7018LZHBKAXXX Armored Breakout 18 OFCR (Riser) 0.850 21.6 1355 Low Smoke Zero Halogen 7024LZHBKAXXX Armored Breakout 24 OFCR (Riser) 0.990 25.2 1800 Low Smoke Zero Halogen XXX = Fiber type, substitute this symbol in part number for desired fiber type as follows: 10 = Single-mode; 50 = 50/125 G.I. Fiber; 62 = 62.5/125 G.I. FDDI Grade Fiber; 62G = 62.5/125 G.I. Gigabit Grade Fiber; LEAF = Corning LEAF™ Fiber, 100 = 100/140 Fiber. Multimode riser and plenum cables are available in orange. Single-mode riser and plenum cables are available in yellow. KEVLAR is a registered trademark of the DuPont Co. KRONE Australia Tel: +61 2 4388 4422 Fax: +61 2 4388 4499 E-mail: kronehlp@krone.com.au KRONE China Tel: +86 21 5442 3680 Fax: +86 21 5442 2711 E-mail: webmaster@krone.com.cn KRONE Hong Kong Tel: +852 2865 4888 Fax: +852 2861 1444 E-mail: marketing@krone.com.hk KRONE Japan Tel: +81 3 3549 0311 Fax: +81 3 5565 2858 E-mail: masato.miyazaki@krone.co.jp KRONE India Tel: +91 80 225 1904 Fax: +91 80 225 1693 E-mail: sales.india@krone.com KRONE Indonesia Tel: +62 21 520 0231 Fax: +62 21 522 1312 E-mail: agus.kumala@krone.co.id KRONE Taiwan Tel: +886 2 2784 1680 Fax: +886 2 2702 5050 E-mail: stewart.yao@krone.com.hk KRONE New Zealand Tel: +64 4 576 9213 Fax: +64 4 576 9243 E-mail: sales@krone.co.nz KRONE Vietnam Tel: +84 4 934 3968- Ext:145, 146 Fax: +84 4 934 3956 E-mail: da.ngo@hn.vnn.vn KRONE Philippines Tel: +632 848 9901 Fax: +632 848 9904 E-mail: larry.cunanan@.krone.com KRONE Singapore & Malaysia Tel: +65 538 8628 Fax: +65 538 8636 E-mail: kfe.mktg@krone.com KRONE Korea Tel: +82 2 565 4844 Fax: +82 2 555 5779 E-mail: by.lim@krone.com.hk KRONE Thailand Tel: +662 637 8301 Fax: +662 637 8306 E-mail: prakit.homnan@krone.com Breakout Cable, 12-Fiber www.kroneasia.com Indoor/Outdoor, Low Smoke Zero Halogen Cable Armored Breakout Cable, 12-Fiber . riser cables ■ Armored version available for rodent resistance INDOOR /OUTDOOR CABLES Cable and Jacket Specifications and Ordering Information Cable Cable Cable. Bandwidth values for Single-mode: 1310nm/1550nm FIBER OPTIC SOLUTIONS Tight-Buffered, Low-Smoke, Zero-Halogen Jacketed Features: ■ Available in single-mode as