FIBER OPTIC SOLUTIONS ThinLITE™ CABLES Mechanical & Environmental Characteristics Test Single Fiber Duplex Cable Zipcord Crush Resistance: EIA-FOTP-41A 400 N/cm 400 N/cm 400 N/cm Impact Resistance: EIA-FOTP-25B 50 Impacts 100 Impacts 50 Impacts Flexing: EIA-FOTP-104A 1000 Cycles 1000 Cycles 1000 Cycles Maximum Pulling Load: EIA-FOTP-33A 400 Newtons 600 Newtons 400 Newtons (89 lbs.) (134 lbs.) (89 lbs.) Maximum Safe Operating Load: 100 Newtons 200 Newtons 100 Newtons (22 lbs.) (44 lbs.) (22 lbs.) Minimum Bend Radius: At Max. Load: 6 cm (2.36≤ ) 6 cm (2.36≤ ) 6 cm (2.36≤ ) Unloaded: 3 cm (1.18≤ ) 3 cm (1.18≤ ) 3 cm (1.18≤ ) Maximum Vertical Rise: without support 27.4 m 27.4 m 15.2 m or service loop (90 ft.) (90 ft.) (50 ft.) (UL) Listed Type: OFNR (Riser): UL1666, IN Type Pass Pass Pass Cable Knot Test: EIA-FOTP-87B Pass Pass Pass Fiber Proof Test: 100 KPSI 100 KPSI 100 KPSI High/Low Temp. Bend Test: EIA-FOTP-37A — — — Cable Twist Test: EIA-FOTP-85A — — — Operating Temperature: -20°C to +70°C -20°C to +70°C 0°C to +70°C Storage Temperature : -40°C to +70°C -40°C to +70°C -40°C to +70°C -40°C to +70°C (non-flexing) Installation Temperature: 0°C to +70°C 0°C to +70°C 0°C to +70°C Optical Specifications Max. Typical Guaranteed Core Clad Atten. Atten. Min. Dia. Dia. Numerical Fiber Type (dB/km) (dB/km) Bandwidth (Microns) (Microns) Aperture 50/125 Multimode 3.5/1.5* 2.6/0.6* 400/400* 50 ± 3 125 ±2 0.200 ± 0.015 62.5/125 FDDI Multimode 3.5/1.5* 2.7/0.75* 160/500* 62.5 ± 3 125 ± 2 0.275 ± 0.015 62.5/125 Gigabit Multimode 3.5/1.5* 2.7/0.75* 200/500* 62.5 ± 3 125 ± 2 0.275 ± 0.015 100/140 Multimode 6.0/3.0* 4.5/2.0* 100/100* 100 + 3 140 + 4 0.290 ± 0.020 Single-mode 1.0/1.0** 0.35/0.25** Mode Field 9.3 ± 0.5 125 ± 2 0.13 (SMF-28) Diameter @1300nm * Attenuation and Bandwidth values for Multimode: 850nm/1300nm ** Attenuation and Bandwidth values for Single-mode: 1310nm/1550nm ThinLITE™ Simplex, Duplex, and Zipcord Cables Features: ■ Single-mode version (900 µm buffer) optimized for the LC connector ■ Multimode version (650 µm buffer) optimized for the MTRJ connector ■ Saves space in high density application ■ Easy to install Benefits: ■ Designed for connectorization ■ Zipcord designed for hybrid patch cords (MTRJ on one end/SC or ST® on the other end) ■ Buffer optimized to enhance connector performance Cable and Jacket Specifications and Ordering Information Cable Cable Cable No. of UL Diameter Weight Jacket Part Number Type Fibers Type (in) (mm) (Nom. lbs./km) Type 5001INHSFH01016 Simplex 1 OFNR (Riser) 0.063 1.6 •• Plenum PVC 5002INHZCH01016 Zipcord 2 OFNR (Riser) 0.063 x 0.138 1.6 x 3.5 •• Plenum PVC 3002INHZCH06216 Zipcord 2 OFNR (Riser) 0.063 x 0.138 1.6 x 3.5 •• Plenum PVC 3002INHZCH05016 Zipcord 2 OFNR (Riser) 0.063 x 0.138 1.6 x 3.5 •• Plenum PVC 3002INSSDS06230 Duplex 2 OFNR (Riser) 0.118 3.0 •• Plenum PVC 3002INSSDS05030 Duplex 2 OFNR (Riser) 0.118 3.0 •• Plenum PVC XXX = Fiber type, substitute this symbol in part number for desired fiber type as follows: 10 = Single-mode; 50 = 50/125 G.I. Fiber; 62 = 62.5/125 G.I. FDDI Grade Fiber; 62G = 62.5/125 G.I. Gigabit Grade Fiber; LEAF = Corning LEAF™ Fiber, 100 = 100/140 Fiber. Multimode riser and plenum cables are available in orange. Single-mode riser and plenum cables are available in yellow. †NR = Not Rated KEVLAR is a registered trademark of the DuPont Co. KRONE Australia Tel: +61 2 4388 4422 Fax: +61 2 4388 4499 E-mail: kronehlp@krone.com.au KRONE China Tel: +86 21 5442 3680 Fax: +86 21 5442 2711 E-mail: webmaster@krone.com.cn KRONE Hong Kong Tel: +852 2865 4888 Fax: +852 2861 1444 E-mail: marketing@krone.com.hk KRONE Japan Tel: +81 3 3549 0311 Fax: +81 3 5565 2858 E-mail: masato.miyazaki@krone.co.jp KRONE India Tel: +91 80 225 1904 Fax: +91 80 225 1693 E-mail: sales.india@krone.com KRONE Indonesia Tel: +62 21 520 0231 Fax: +62 21 522 1312 E-mail: agus.kumala@krone.co.id KRONE Taiwan Tel: +886 2 2784 1680 Fax: +886 2 2702 5050 E-mail: stewart.yao@krone.com.hk KRONE New Zealand Tel: +64 4 576 9213 Fax: +64 4 576 9243 E-mail: sales@krone.co.nz KRONE Vietnam Tel: +84 4 934 3968- Ext:145, 146 Fax: +84 4 934 3956 E-mail: da.ngo@hn.vnn.vn KRONE Philippines Tel: +632 848 9901 Fax: +632 848 9904 E-mail: larry.cunanan@.krone.com KRONE Singapore & Malaysia Tel: +65 538 8628 Fax: +65 538 8636 E-mail: kfe.mktg@krone.com KRONE Korea Tel: +82 2 565 4844 Fax: +82 2 555 5779 E-mail: by.lim@krone.com.hk KRONE Thailand Tel: +662 637 8301 Fax: +662 637 8306 E-mail: prakit.homnan@krone.com www.kroneasia.com Duplex Simplex Zipcord . Resistance: EIA-FOTP-25B 50 Impacts 100 Impacts 50 Impacts Flexing: EIA-FOTP-104A 1000 Cycles 1000 Cycles 1000 Cycles Maximum Pulling Load: EIA-FOTP-33A 400. EIA-FOTP-85A — — — Operating Temperature: -2 0°C to +70°C -2 0°C to +70°C 0°C to +70°C Storage Temperature : -4 0°C to +70°C -4 0°C to +70°C -4 0°C to +70°C -4 0°C