KRONE 10Gb/s Graded Index Multimode Fiber 850 nm Laser-Optimised 50 µm Multimode Fiber for 10Gb/s Application over 300m KRONE 10 Gb/s multimode fibers are produced by the proprietary Plasma- activated Chemical Vapour Deposition process (PCVD), acknowledged worldwide as offering the best core profile accuracy in multimode Fiber. 850nm/1300nm 3.0 / 1.0 3.0 / 1.0 3.0 / 1.0 3.0 / 1.0 3.0 / 1.0 1310nm/1550nm 0.4 / 0.3 850nm/1300nm 200* / 500* 200* / 500* 500* / 500* 500* / 500* 2000* / 500* 1310nm/1550nm N / A Core 62.5 / 125 Multimode 62.5 / 125 Enhanced MM 50 / 125 Multimode 50 / 125 Enhanced MM 50 / 125 Ultra MM 62.5 / 125 Multimode Single- Mode 850nm/1300nm 3.5 / 1.5 3.5 / 1.5 3.5 / 1.5 3.5 / 1.5 3.5 / 1.5 1310nm/1550nm 1.0 / 1.0 Guaranteed Min Bandwidth (MHz-km) Typical Attenuation (dB/km) Max Attenuation (dB/km) * Bandwidth specified by overfilled launch (OFL) ** Bandwidth specified by laser-based launch Specifications: * 10 Gigabit Ethernet distance guarantees at 1300nm are achieved via four 3.125 Gbps channels * multiplexed with WWDM technology (10GBASE-LX4) Guaranteed Ethernet Transmission Performance: 850nm/1300nm 300m / 550m 500m / 1km 550m / 550m 750m / 2km 900m / 550m 1310nm/1550nm 5km / N/A 850nm/1300nm 35m / 300m* 65m / 300m* 86m /300m* 110m / 300m* 300m / 300m* 1310nm/1550nm 10km / 40km Core 62.5 / 125 Multimode 62.5 / 125 Enhanced MM 50 / 125 Multimode 50 / 125 Enhanced MM 50 / 125 Ultra MM 62.5 / 125 Multimode Single- Mode 850nm/1300nm 300m / 2km 300m / 2km 300m / 2km 300m / 2km 300m / 2km 1310nm/1550nm 2km / N/A Gigabit Ethernet 1 Gbps Gigabit Ethernet 1 Gbps Fast Ethernet 100 Mbps Features Applications Local Area Networks (LAN) backbones e.g.(10GBASE-SX) Storage Area Networks (SAN) Central Office Connections Each fiber tested to specifications after cabling All Multimode fiber types exceed Gigabit Ethernet industry standard (IEEE 802.3z) Utra 50 µm fiber is laser-optimized for 300 meter 10 Gbps applications (IEEE 802.3ae) Features of KRONE multimode Fibers. As OM-3 type MMF, KRONE fully supports 850 nm (SX) serial 10 Gb/s applications over 300 metres. An effective modal bandwidth of 2000 MHz.km at 850 nm under laser launch is ensured by means of 850 nm DMD specification. The overfilled launch (OFL) bandwidth of the KRONE multimode Fiber at 850 nm is ≥ 1500 MHz.km; at 1300 nm the OFL bandwidth is ≥ 500 MHz.km. This OFL bandwidth performance gives strong support to legacy applications. KRONE multimode Fiber offers a smooth, low-cost migration path for premises backbone cabling from 10 Mb/s up to 10 Gb/s over 300 m. KRONE multimode Fibers offer another cost-saving advantage by eliminating the need to use expensive mode-conditioning patch cords for 1300 nm laser based systems such as 1000BASE-LX. KRONE multimode Fibers are equipped with an excellent microbending sensitivity reducing coating, which results in easy cabling and installation. Thanks to the special bandwidth performance of the KRONE multimode Fiber, a broad range of legacy and new 10 Gb/s applications can be supported. Together with other multimode Fiber products produced by KRONE (e.g. the 1 Gb/s HiCap class), this range of multimode products offers end users the best possible optimisation of their networks in the most flexible way. For an overview of all KRONE's multimode products and the applications supported, reference is made to our Application Note Five. The KRONE multimode Fiber fulfils the requirements of TIA/EIA-492AAAC, ISO/IEC 11801 OM-3 type and type A1a.2 of IEC 60793-2-10 (in preparation). Application in other LAN systems. 62.5/125MM 62.5/125 Enhanced MM 50/125 MM 50/125 Enhanced MM 50/125 Ultra MM Single Mode Ordering Information: Description Part Number 062 62E 050 50E 50U 010 * Suffixes are used as the last three characters of typical cable part numbers. * Example: 6012INHCBC62E, 6006PTHBKO010, 7006LZHIOC50U xxx (2-72) Fiber Outside Plant Cable, Non-Armored, Single xxx (2-72) Fiber Outside Plant Cable, Non-Armored, Dual Jacket xxx (2-72) Fiber Outside Plant Cable, Armored xxx (2-24) Fiber Indoor/Outdoor LSZH Cable, Non-Armored, Riser (OFNR) xxx (2-24) Fiber Indoor/Outdoor LSZH Cable, Non-Armored Breakout, Riser (OFNR) xxx (2-24) Fiber Indoor/Outdoor LSZH Cable, Armored Breakout, Riser (OFCR) Part Number NxxxLTSDUCyyy NxxxLTDDUCyyy NxxxLTDARMyyy 7xxxLZHIOCyyy 7xxxLZHIOByyy 7xxxLZHBKAyyy xxx (4-72) Fiber Distribution Cable, Riser (OFNR) xxx (4-72) Fiber Distribution Cable, Plenum (OFNP) xxx (4-24) Fiber 2.4mm Breakout Cable, Riser (OFNR) xxx (4-24) Fiber 2.4mm Breakout Cable, Plenum (OFNP) 2-Fiber Distribution Cable, Riser (OFNR) 2-Fiber Distribution Cable, Plenum (OFNP) Part Number 6xxxINHCBCyyy 6xxxPTHCBCyyy 6xxxINHBKOyyy 6xxxPTHBKOyyy 6002INHFDDyyy 6002PTSFDDyyy KRONE Asia Offices - For your Local Contact KRONE China Tel: +86 21 5442 3680 Fax: +86 21 5442 2711 E-mail: webmaster@krone.com.cn KRONE Hong Kong Tel: +852 2865 4888 Fax: +852 2861 1444 E-mail: marketing@krone.com.hk KRONE Indonesia Tel: +62 21 520 0231 Fax: +62 21 522 1312 E-mail: agus.kumala@krone.co.id KRONE Korea Tel: +82 2 565 4844 Fax: +82 2 555 5779 E-mail: marketing@krone.com.hk KRONE Philippines Tel: +632 848 9901 Fax: +632 848 9904 E-mail: larry.cunanan@krone.com KRONE Singapore & Malaysia Tel: +65 6 538 8628 Fax: +65 6 538 8636 E-mail: kfe.mktg@krone.com KRONE Taiwan Tel: +886 2 2579 5895 Fax: +886 2 2577 4157 E-mail: marketing@krone.com.hk KRONE Thailand Tel: +662 637 8301 Fax: +662 637 8306 E-mail: prakit.homnan@krone.com KRONE Vietnam Tel: +84 4 934 3968 Ext:145-6 Fax: +84 4 934 3956 E-mail: da.ngo@krone.com Outdoor and Indoor / Outdoor Cable: Description Indoor Cable: Description KHK/NOV 2002 http://www.kroneasia.com . KRONE 10Gb/s Graded Index Multimode Fiber 850 nm Laser-Optimised 50 µm Multimode Fiber for 10Gb/s Application over 300m KRONE 10 Gb/s multimode fibers. 6006PTHBKO 010, 7006LZHIOC50U xxx ( 2-7 2) Fiber Outside Plant Cable, Non-Armored, Single xxx ( 2-7 2) Fiber Outside Plant Cable, Non-Armored, Dual Jacket xxx ( 2-7 2) Fiber