Danh mục về cartridge

CARTRIDGE FILTERS AND ACCESSORIES At USFilter, our mission is to provide the products and services you need to meet your water requirements — anytime, anyplace An example of this offering is our complete line of cartridge filtration products shown in this catalog Be it a sediment removal filter for the pretreatment of an RO system or validated submicron filtration of water used to manufacture WFI quality water, USFilter is your one stop source for your filtration needs As the world’s largest water treatment company, we offer a wide range of other capabilities, reliable products and services, combined with experience and technical knowledge you can trust Give us a call so we can work with you to deliver a solution that meets your most stringent specifications Call our 24-hour Customer Service at 800-466-7873 for information and support Cartridge Filters and Accessories TABLE OF CONTENTS CARTRIDGE END-CAPS NOMINALLY-RATED CARTRIDGES DI Gard ROGARD NT Series Prepure DP™ Postpure PP™ ABSOLUTE-RATED CARTRIDGES NA Series WN Series WE Series 10 DI Series 11 VH Series (Validated) 12 PV Series (Validated) 13 VENT FILTERS EA Series 14 VP Series (Validated) 15 Vent Capsule 16 SPECIALTY FILTERS UF Series 17 Point-of-Use Capsule 18 Pulverized Activated Carbon 19 Granular Activated Carbon 20 HOUSINGS 316 Stainless Steel, Single Tube (Code F) 21 316L Stainless Steel, Single Tube (Code 0) 22 304 Stainless Steel, 5-Round, Multi-Tube 23 304 Stainless Steel, 6-Round, Multi-Tube 24 316 Stainless Steel, Multi-Tube 25 316L Electropolished Stainless Steel, Multi-Tube 26 Plastic 27 Natural Polypropylene 28 Taking Care of the World's Water Cartridge End Cap Configuration The following table is presented as reference when ordering filter cartridges For more detailed information, please contact our Technical Support Team at 800-875-7873 ext 5000 CARTRIDGE DESIGN DESCRIPTION CODE Gaskets compressed on knife edge seal of housing F Single O-ring located inside the cartridge 10 O-rings are located externally on the cartridge, other end flat O-rings are located externally on the cartridge, other end spear 227 O-rings are located externally on the cartridge The O-ring adapter locks into the housing Spear assembly on other end Code F Style Cartridges Flat gaskets Code 10 Style Cartridge Single open end with 1-120 internal O-Ring at open end Code O Style Cartridges 2-222 O-Ring Outlet Code Style Cartridges 2-222 O-Ring Outlet with spear assembly Code Style Cartridges 2-226 O-Ring locking outlet with spear assembly 24-HR CUSTOMER SERVICE: (800) 466-7873 DI GARD™ String Wound Prefiltration Cartridges • Designed for a variety of prefiltration applications such as SDI (service deionization), reverse osmosis, and CDI® (Continuous Deionization) Systems • String wound type filter with your choice of cotton, industrial or surfactant-free polypropylene string over a polypropylene core • Large void volume design for low-cost, reliable filtration performance with high contaminant holding capacity • Continuous filter winding in 20-, 30-, and 40-inch lengths prevents by-passing or excessive pressure drops at the seams • Gasketed end caps on 0.5 µm rated filters for positive sealing that eliminates by-passing • Surfactant-free FCPX style filter meets USP Class VI Biological Tests for Plastics requirements FLOW RATE vs INITIAL CLEAN PRESSURE DROP Diameter (OD) 2.5" (6.5 cm) Length (in) 9.75, 10, 19.5, 20, 29.25, 30, 40 Operating Parameters 140°F (60°C) 50 psi (3.4 bar) 0.5, 1, 3, 5, 10, 20, 50 Microns Nominal 90% 0.5 µm 5.0 gpm/10" length (18.9 lpm/10" length) ORDERING INFORMATION Catalog Number and Description FCXX FCCS = cotton string fiber cartridge FCPS = polypropylene string fiber cartridge FCPX = surfactant-free polypropylene string fiber cartridge F Cartridge Code: F = double open end XX Length (in): 09 = 9.75, 10 = 10, 19 = 19.5, 20 = 20, 29 = 29.25, 30 = 30, 40 = 40 XX Micron Rating: S5 = 0.5µm, 01 = µm, 03 = µm, 05 = µm, 10 = 10 µm, 20 = 20 µm, 50 = 50 µm To figure your order number, replace the X with one of the numbered or lettered options beside it Note: Not all part number combinations are available; consult Technical Support for assistance 3 µm µm 14 10 µm 1µm 1.6 20 µm 1.2 08 50 µm 04 Recommended Water Flow Rates TECHNICAL SUPPORT (800) 875-7873 EXT 5000 Clean Pressure Drop (PSID) FCCS Bleached white cotton fiber string media with polypropylene core FCPS Polypropylene fiber string media with polypropylene core FCPX Surfactant-free polypropylene fiber string media with polypropylene core NOTE: Code F cartridges (0.5 µm) have santophrene end seals 16 LPM 12 2.0 Materials Maximum Temperature Maximum Differential Pressure @ 25°C Micron Ratings Filtration Efficiency 02 Water Flow Rate/10" cartridge (GPM) BAR CARTRIDGE SPECIFICATIONS Dimensions ROGARD™ Graded Density Polypropylene Media Filter Cartridge • Designed for a variety of prefiltration applications such as SDI (service deionization), reverse osmosis and CDI® (Continuous Deionization) Systems • Graded density melt spun polypropylene media design for exceptional throughput, with high contaminant holding capacity • Gasketed end caps on 1, and µm rated filters for positive sealing that eliminates by-passing • ROGARD cartridge filters meet the criteria for USP Class VI Biological Tests for Plastics, ensuring that no surfactants or coatings interfere with the application, making these cartridges ideal for use in the food and beverage industry • Available in a variety of lengths and pore sizes to meet a wide range of applications FLOW RATE vs INITIAL CLEAN PRESSURE DROP Diameter (OD) 2.5" (6.5 cm) Length (in) 9.75, 10, 12, 19.5, 20, 30, 31, 40 12 16 20 24 28 32 LPM µm µm 10 µm Clean Pressure Drop (PSID) Operating Parameters 160°F (70°C) 50 psi (3.4 bar) 1, 3, 5, 10, 20, 25, 50, 75 microns Nominal 90% 20 µm 25 µm 50 µm 02 25 15 01 05 Recommended Water Flow Rates 5.0 gpm/10" length (18.9 lpm/10" length) Water Flow Rate/10" Cartridge (GPM) 10 ORDERING INFORMATION Catalog Number and Description FCRO Rogard II all polypropylene depth cartridge X Cartridge Code: F = double open end (1&5 µm w/gasket) = 2-222 o-rings (12&20", 1&5 µm only) N = double open end (1, & µm – no gasket) XX Length (in): 09 = 9.75, 10 = 10, 12 = 12, 19 = 19.5, 20 = 20, 30 = 30, 31 = 31, 40 = 40 XX Micron Rating: 01 = µm, 03 = µm, 05 = µm, 10 = 10 µm, 20 = 20 µm, 25 = 25 µm, 50 = 50 µm, 75 = 75 µm To figure your order number, replace the X with one of the numbered or lettered options beside it Note: Not all part number combinations are available; consult Technical Support for assistance 03 75 µm 35 Melt Blown polypropylene Integral polypropylene core Silicone o-rings Santophrene end seals Maximum Temperature Maximum Differential Pressure @ 25°C Micron Ratings Filtration Efficiency µm Materials Media Core O-Rings Gaskets 45 24-HR CUSTOMER SERVICE: (800) 466-7873 BAR CARTRIDGE SPECIFICATIONS Dimensions NT Series Graded Pore Polypropylene Depth Filter Cartridge • Designed to deliver precision prefiltration through the patented advanced melt blown CoLD® technology structure that incorporates large diameter fibers for strength while maintaining small fibers for filtration • CoLD fiber technology melt blown structure delivers exceptional retention, mechanical strength and on-stream life • Graded pore structure throughout the filter’s depth provides high contaminant holding capacity • High purity, 100% polypropylene construction is free of surfactants, binders and adhesives • FDA listed materials of construction FLOW RATE vs INITIAL CLEAN PRESSURE DROP CARTRIDGE SPECIFICATIONS Dimensions Diameter (OD) 2.5" (6.5 cm) Length (in) 9.75, 10, 20, 30, 40 Materials Cartridge Polypropylene caps and core Media CoLD fiber melt blown polypropylene Seals Silicone o-rings and gaskets 12 16 20 24 Operating Parameters Maximum Temperature 180°F (82°C) @ 15 psid (1.0 bar) Maximum Differential Pressure @ 30°C 60 psi (4.1 bar) Filtration Efficiency Nominal 90% Recommended Water Flow Rates 36 LPM 32 µm µm BAR Clean Pressure Drop (PSID) 0.5 µm 28 µm 2 0.5 – micron 2.0 gpm/10" length (7.6 lpm/10" length) – 75 micron 5.0 gpm/10" length (18.9 lpm/10" length) Sanitizing Agents 10 µm 15 µm 20 µm Chlorine, hydrogen peroxide Water Flow Rate/10" Cartridge (GPM) 10 FLOW RATE vs INITIAL CLEAN PRESSURE DROP ORDERING INFORMATION Catalog Number and Description 12 16 20 24 28 36 LPM 32 0.7 XX Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40 XX Micron Rating: S5 = 0.5 µm, 01 = µm, 03 = µm, 05 = µm, 10 = 10 µm, 15 = 15 µm, 20 = 20 µm, 30 = 30 µm, 40 = 40 µm, 50 = 50 µm, 75 = 75 µm To figure your order number, replace the X with one of the numbered or lettered options beside it Note: Not all part number combinations are available; consult Technical Support for assistance 0.6 04 0.5 0.4 30 µm 40 µm 50 µm 03 75 µm 0.3 02 0.2 01 0.1 CoLD is a registered trademark of Filterite Corporation TECHNICAL SUPPORT (800) 875-7873 EXT 5000 5 Water Flow Rate/10" Cartridge (GPM) 10 BAR X Cartridge Code: = double open end w/ internal o-rings F = double open end (0.5 – mm w/gasket) N = double open end (0.5 – mm – no gasket) Clean Pressure Drop (PSID) FCNT Polypropylene CoLD depth filter cartridge Prepure DP™ Graded Density Polypropylene Depth Media Filter Cartridge • Composed of graded density melt blown polypropylene depth media for high efficiency prefiltration and post-filtration of DI resin applications • Prepure DP filtration cartridges feature high contaminant loading due to graded density depth filtration media construction • Filter meets the criteria for USP Class VI Biological Tests for Plastics, ensuring that no surfactants or coatings interfere with the application, making these ideal for use in the food and beverage industry • All materials are FDA listed for contact with food and beverages • Virgin polypropylene construction with fusion welding minimizes extractables FLOW RATE vs INITIAL CLEAN PRESSURE DROP CARTRIDGE SPECIFICATIONS Dimensions 2.0 18 0.5 Cartridge Polypropylene caps, core and cage Media Non-woven melt blown polypropylene Seals Silicone o-rings and gaskets 16 LPM 1µ m 2.4 12 m Materials 14 3µ 3.0 µm Diameter (OD) 2.6" (6.6 cm) Length (in) 9.75, 10, 20, 30, 40 1.8 Operating Parameters Recommended Water Flow Rates 0.5 – micron 2.0 gpm/10" length (7.6 lpm/10" length) 10 – 50 micron 5.0 gpm/10" length (18.9 lpm/10" length) 12 1.6 5µ 1.4 10 1.2 µm 10 m 25 µ Sanitizing Agents Chlorine or hydrogen peroxide m 06 04 50 µm 02 ORDERING INFORMATION Catalog Number and Description FCDP All polypropylene depth filter cartridge X Cartridge Code: = 2-222 o-rings = 2-226 o-rings w/spear = double open end w/internal o-rings F = double open end w/flat gasket seal Water Flow Rate/10" Cartridge (GPM) XX Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40 XX Micron Rating: S5 = 0.5 µm, 01 = µm, 03 = µm, 05 = µm, 10 = 10 µm, 25 = 25 µm, 50 = 50 µm To figure your order number, replace the X with one of the numbered or lettered options beside it Note: Not all part number combinations are available; consult Technical Support for assistance 24-HR CUSTOMER SERVICE: (800) 466-7873 BAR Clean Presure Drop (PSID) Maximum Temperature 140°F (60°C) @ 30 psid (2.1 bar) Maximum Differential Pressure @ 20°C 60 psi (4.1 bar) Filtration Efficiency Nominal 90% Postpure PP™ Graded Density Pleated Polypropylene Depth Media Filter Cartridge • Composed of graded-density, pleated, polypropylene depth media for high efficiency postfiltration of DI resin applications • Filter components meet USP Class VI Biological Tests for Plastics, ensuring that no surfactants or coatings interfere with the application, making these ideal for use in the food and beverage industry • Postpure DP filtration cartridges feature high contaminant loading due to graded density depth filtration media construction • Virgin polypropylene construction with fusion welding minimizes extractables • All materials are FDA listed for contact with food and beverages FLOW RATE vs INITIAL CLEAN PRESSURE DROP 0.3 Maximum Temperature 140°F (60°C) @ 40 psid (2.8 bar) Maximum Differential Pressure @ 25°C 75 psi (5.1 bar) Filtration Efficiency nominal 90% Recommended Water Flow Rates 1.5 10 1.0 µm µm 10 & 30 µm 0.5 0.3 – micron 2.0 gpm/10" length (7.6 lpm/10" length) – 30 micron 8.0 gpm/10" length (30.1 lpm/10" length) Sanitizing Agents Chlorine, hydrogen peroxide, in-line with hot water (82°C) for one hour, autoclaved for 20 minutes at 121°C under no load conditions ORDERING INFORMATION Catalog Number and Description FCPP All polypropylene, pleated, nominal depth filter cartridge X Cartridge Code: = 2-222 o-rings = 2-226 o-rings locking tabs w/spear = double open end w/internal o-rings F = double open end w/flat gasket seal XX Length (in): 10 = 10, 20 = 20, 30 = 30 XX Micron Rating: S3 = 0.3 µm, S6 = 0.6 µm, 01 =1 µm, 03 = µm, 05 = µm, 10 = 10 µm, 30 = 30 µm To figure your order number, replace the X with one of the numbered or lettered options beside it Note: Not all part number combinations are available; consult Technical Support for assistance TECHNICAL SUPPORT (800) 875-7873 EXT 5000 15 2.0 Water Flow Rate/10" Cartridge (GPM) 10 05 BAR Clean Pressure Drop (PSID) Operating Parameters 20 m 2.5 Cartridge Polypropylene caps, core and cage Media Pleated, non-woven melt blown polypropylene Seals Silicone o-rings and gaskets 32 LPM 24 1µ Materials 16 µm Diameter (OD) 2.6" (6.6 cm) Length (in) 10, 20, 30 3.0 µm Dimensions 0.6 CARTRIDGE SPECIFICATIONS NA Series Absolute Rated Polypropylene Depth Filter Cartridge • Designed to deliver precision filtration through the patented advanced melt blown CoLD® technology structure that incorporates large diameter fibers for strength while maintaining small fibers for filtration • Patented CoLD fiber technology melt blown structure provides outstanding retention efficiency, mechanical strength, and long on-stream life • Multi-zone design produces a gradient pore structure to provide pre- and post-filtration in a single cartridge • Absolute filtration with sharp particle cutoffs deliver precise removal efficiencies • High purity, 100% polypropylene construction is free of surfactants, binders and adhesives making these cartridges ideal for use in food and beverage applications FLOW RATE vs INITIAL CLEAN PRESSURE DROP CARTRIDGE SPECIFICATIONS Dimensions Diameter (OD) 2.5" (6.5 cm) Length (in) 9.75, 10, 20, 30, 40 Materials Operating Parameters Maximum Temperature 180°F (82°C) @ 15 psid (1.0 bar) Maximum Differential Pressure @ 30°C 60 psi (4.1 bar) Filtration Efficiency 100% Absolute 12 16 20 µm 24 28 36 LPM 32 µm µm BAR Clean Pressure Drop (PSID) Cartridge Polypropylene caps and core Media CoLD fiber melt blown polypropylene Seals Silicone o-rings and gaskets 0.5 µm 10 µm Recommended Water Flow Rates 0.5 – micron 2.0 gpm/10" length (7.6 lpm/10" length) 10 – 70 micron 5.0 gpm/10" length (18.9 lpm/10" length) 15 µm 20 µm Sanitizing Agents Chlorine, hydrogen peroxide Water Flow Rate/10" Cartridge (GPM) 10 FLOW RATE vs INITIAL CLEAN PRESSURE DROP 12 16 20 24 28 36 LPM 32 0.7 30 µm FCNA Absolute rated CoLD depth filter cartridge 0.6 50 µm 0.5 70 µm XX Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40 XX Micron Rating: S5 = 0.5 µm, 01 = µm, 03 = µm, 05 = µm, 10 = 10 µm, 15 = 15 µm, 20 = 20 µm, 30 = 30 µm, 50 = 50 µm, 70 = 70 µm To figure your order number, replace the X with one of the numbered or lettered options beside it Note: Not all part number combinations are available; consult Technical Support for assistance 04 03 0.4 BAR X Cartridge Code: = 2-222 o-rings = 2-226 o-rings w/spear = double open end w/ internal o-rings F = double open end w/flat gasket seal = 2-222 o-rings w/spear Clean Pressure Drop (PSID) ORDERING INFORMATION Catalog Number and Description 0.3 02 0.2 01 0.1 Water Flow Rate/10" Cartridge (GPM) 10 24-HR CUSTOMER SERVICE: (800) 466-7873 Hydrophobic PTFE Media Vent Capsule Filter • Composed of a pleated hydrophobic PTFE filter membrane rated at 0.02 µm absolute for small volume storage tank venting applications • Convenient threaded inlet, with 1/2" NPTM inlet fitting screws into 1/2" NPTF bulkhead fitting, eliminates the need for a filter housing • Hydrophobic expanded PTFE membranes are fully validated by bacterial challenge (HIMA) • Filters feature thermally-bonded polypropylene cage without using adhesives to ensure low extractables • 100% integrity tested in manufacturing and can be repeatedly autoclaved with steam up to 140°C AIR FLOW RATES AT NEAR ATMOSPHERIC PRESSURE (VENT APPLICATIONS) CARTRIDGE SPECIFICATIONS Dimensions Diameter (OD) 2.2" (5.6 cm) Length (in) 5.9 (15 cm) Inner Connection 1⁄2" MNPT 250 500 SLPM 750 1000 Cartridge Polypropylene Media PTFE Membrane Maximum Temperature Maximum Differential Pressure @ 23°C Air Filtration Rating Toxicity Pressure Drop (PSID) Operating Parameters Ambient Air 60 psi (4.1 bar) 0.02 µm 100% Absolute Non-toxic by USP Class VI Biological test for plastics Sanitizing Agents 5.0 35 4.0 28 3.0 21 2.0 14 1.0 07 Chlorine, Hydrogen Peroxide ORDERING INFORMATION Catalog Number and Description FCVPTO6S1 Capsule Hydrophobic PTFE Filter 16 24 32 Air Flow (SCFM) NOTE: These filter cartridges should not be used as a combination air vent/water overflow device 16 24-HR CUSTOMER SERVICE: (800) 466-7873 BAR Materials UF Series Hollow Fiber Polysulfone Media Filter Cartridge • Composed of validatable hollow fiber pleated polysulfone media with polypropylene hardware • These absolute rated filters offer excellent bacteria and particle and pyrogen removal for critical pharmaceutical and life science applications, at economical costs • Code 0, Code 5, and Code configurations are available in 10, 20, 30 and 40-in lengths • Meet current USP Class VI biological test for plastics, with a validation certificate available • Contain no surfactants or coatings to interfere with your application, and thermo-plastic construction process minimizes extractables • Hollow fiber construction ensures strength, while exhibiting low pressure drop and exceptionally high flow rates FLOW RATE vs INITIAL CLEAN PRESSURE DROP CARTRIDGE SPECIFICATIONS Dimensions Diameter (OD) 2.9" (7.4 cm) Length (in) 10, 20, 30, 40 12 Materials 0.05 µm LPM 20 0.1 µm 185°F (85°C) @ 10 psid (.7 bar) 30 psi (2 bar) @ 25°C 100% Absolute Non-toxic by USP Class VI Biological test for plastics Diffusive flow test methods 10 BAR Operating Parameters Clean Pressure Drop (PSID) 10 Cartridge Polypropylene caps and cage, polyurethane end sealant Media Polysulfone fibers Seals Silicone o-rings Maximum Temperature Maximum Differential Pressure Filtration Rating Toxicity Validation 0.2 µm 0.5 Recommended Water Flow Rates 0.05 micron 2.0 gpm/10" length (7.6 lpm/10" length) 0.1 and 0.2 micron 3.0 gpm/10" length (11.4 lpm/10" length) Sanitizing Agents Chlorine, hydrogen peroxide, autoclaved for 20 minutes at 121°C under no load conditions ORDERING INFORMATION Catalog Number and Description FCUF Filter cartridge ultra filter X Cartridge Code: = 2-222 o-rings = 2-222 o-rings w/spear end = double open end w/internal o-rings = 2-226 o-rings w/locking tabs/spear end XX Length (in): 10 = 10, 20 = 20, 30 = 30, 40 = 40 XX(X) Micron Rating: S05 = 0.05 µm, S1 = 0.1 µm, S2 = 0.2 µm To figure your order number, replace the X with one of the numbered or lettered options beside it Note: Not all part number combinations are available; consult Technical Support for assistance TECHNICAL SUPPORT (800) 875-7873 EXT 5000 17 Water Flow Rate/10" Cartridge (GPM) Point-of-Use High Purity Water Filtration Capsule Filters • Designed to provide absolute final filtration after laboratory water purification products or standard service deionization systems • All polypropylene shell and support materials provide a non-pyrogenic filter, based on USP and LAL testing • Microporous membrane is made from hydrophilic polyethersulfone, providing a bacteria retentive filter based on Pseudomonous diminuta challenge (HIMA) • Integrity tested and validatable, making them ideal for microelectronic and pharmaceutical applications • Disposable housings are fusion welded without adhesives to ensure low extractables CARTRIDGE SPECIFICATIONS Model Number 500 1000 Dimensions 500 cm2 2.7" (6.8 cm) 4.8" (12.2) Filtration Area Diameter (OD) Length/in (cm) 1000 cm2 2.7" (6.8 cm) 6.7" (16.9) Materials Cartridge Polypropylene caps, core and cage Media Pleated polyethersulfone Operating Parameters Maximum Temperature Maximum Op Pressure Maximum Momentary Pressure Filtration Rating Toxicity Validation 140° F (60° C) @ 30 psid (2.1 bar) 60 psid (4.1bar) @ 20° C 100 psid (7.0 bar) @ 20° C 100% Absolute Non-toxic by USP Class VI Biological test for plastics HIMA Bacterial challenge test methods (107 organisms/cm2) Recommended Water Flow Rates Model Number 0.1 µm 0.2 µm 500 0.04 gpm (0.16 lpm) 0.1 gpm (0.38 lpm) 1000 0.1 gpm (0.38 lpm) 0.3 gpm (1.1 lpm) Integrity Test Pore Size: Minimum Water Bubble Point 0.1 µm ≥ 90 psig (≥ 6.2 bar) 0.2 µm ≥ 45 psig (≥ 3.1 bar) Pore Size: Diffusional Flow (cc/min) 0.1 µm ≤ 4.0 cc/min at 50 psi (3.4 bar) 0.2 µm ≤ 4.0 cc/min at 40 psi (2.8 bar) ≥ 90 psig (≥ 6.2 bar) ≥ 45 psig (≥ 3.1 bar)