Page 1 of 2 adckrone.com/au z TrueNet ® TerminationModules Issue 3 O r d e r i n g I n f o r m a t i o n Description Part Number BMF, 12 Way Kit, CopperTen™ 6450 1 107-00 Product Description and Application Supplied as kit consisting of: a 12 way mounting frame and 12 CopperTen 20 Pair modules with rear cable management. The CopperTen module provides a 20 pair high-density, high performance, cost competitive 10G Base-T channel compliant module, to accept ADC KRONE’s CopperTen cable. Module General Specifications and Features The upper and lower shell are moulded in PBT. The internal shielding is manufactured from tin plated mild steel. Modules are terminated with the standard ADCKRONEtermination tools 6089 2 003-00 or 6417 2 055-01, and may also be terminated with a 110 tool. Technical Specifications Environment for use: Indoors or in dry enclosure rated IP54 or greater Operating temperature range: -40°C to +80°C Maximum relative humidity: . ≤ 93% non-condensing Wire range for solid & stranded copper conductors: 0.4-0.65mm (26-22 AWG)* * A maximum of 2 equal, solid conductors only, of up to 0.5 conductor diameter can be terminated per slot. Only 1 conductor of stranded wires per slot can be terminated. If any conductors >0.5 have been terminated, reversal to smaller conductors in no longer possible. Wire insulation diameter range (PE, PVC): .Typically 0.7-1.4mm Number of wire reterminations: . Up to 200 Wire insertion force (0.5 conductor diameter): 6N Wire pull out force, radial (0.5 conductor diameter): 5N Wire pull out force, axial (0.5 conductor diameter): . 35N Number of patching cycles, Modules: . Up to 750 Patch plugs: .Up to 200 Transmission & reliability:……………………………………. Meets & exceeds the requirements of TIA/EIA-TSB-155 Draft 1 when used with KRONE CopperTen cable. Change of contact interface resistance after reliability testing .< 5mΩ Typical to ISO/IEC 11801 and TIA/EIA 568B per through connection. ie. 2 insulation displacement and 1 disconnection contact joint. Voltage/current rating at 25°C ambient: . ≤ 150V AC at 2.5A max. Dielectric strength: ≤ 1.5kV AC 1800 801 298 z helpdesk.au@adckrone.com Page 2 of 2 6450 1 107-00 Issue 3 Surge voltage strength (1.2/50 µsec wave shape): . ≤ 2.5kV Surge current strength (8/20 µsec wave shape): Modules: ≤ 3kA Patch plugs: . ≥ 0.5kA Insulation resistance: ≥ 5x10 M Ω at 500 VDC Flammability rating of plastic housing: UL 94 V0 . from tin plated mild steel. Modules are terminated with the standard ADC KRONE termination tools 6089 2 00 3-0 0 or 6417 2 05 5-0 1, and may also be terminated. high-density, high performance, cost competitive 10G Base-T channel compliant module, to accept ADC KRONE s CopperTen cable. Module General Specifications