Tài liệu Building Entrance Terminals pdf

Features: • High-density primary protection allows up to eighteen (double-sided) 100-pair units to be mounted in a standard 7-foot, 19- inch rack • 26 AWG cable stub (fuse link) is provided for splicing to the incoming 24 AWG cable • Building entrance terminals available with 5- pin protectors in 25, 50 and 100-pair units • 5-pin protectors are rated 300 volts • Allow “look-both-ways” testing and monitoring without removing wires or protection • Numerous labeling options allow comprehensive marking • Variety of mounting hardware options • 25-pair female Telco (RJ-21X) connectors available in 100-pair units Applications: • Primary protection at commercial demarcation points • Primary protection for campus environments Compliances: • UL 497 listed • 100% compliant with Telcordia TR-NWT-000937 SPEC SHEET Building Entrance Terminals High-Density, 5-Pin Protection with KRONE ® Series 2 Blocks SPEC SHEET www.adc.com • +1-952-938-8080 • 1-800-366-3891 ADC's Building Entrance Terminals provide high-density primary protection and are fully compliant to UL ® and Telcordia specifications. These units are ideal for applications where lockable enclosures are not required, such as controlled environment cabinets and vaults, secure equipment rooms and frames. Specifications ELECTRICAL CHARACTERISTICS: 5-Pin Protector Modules 300V, gold-plated pins BET Dielectric Withstand 4000 VDC CONSTRUCTION CHARACTERISTICS: MECHANICAL CHARACTERISTICS: KRONE ® Series 2 Subscriber Interface: Contact Resistance < 1 m Ω Insulation Resistance > 5 x 10 4 MΩ Contact Material Copper Alloy Contact Plating Silver Number of Test Cord Insertions > 750 IDC Reterminations > 200 Wire Diameter Range for Solid and Stranded Copper Conductors: Two Conductors per Contact (same diameter) 22-26 AWG 0.65 to 0.40 mm (0.026" to 0.016") One Conductor per Contact 20-26 AWG 0.90 to 0.40 mm (0.035" to 0.016") Wire Insulation Diameter Range (PE,PVC) 0.68 mm to 1.60 mm (0.027" to 0.063") 9/05 • 1332620 Buidling Entrance Terminals 2 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Building Entrance Terminals High-Density, 5-Pin Protection with KRONE ® Series 2 Blocks Operating Temperature In/Outdoor -40 ˚ to 80 ˚ C (-40 ˚ to 176 ˚ F) Indoor -20 ˚ to 70 ˚ C (-4 ˚ to 158 ˚ F) Dimensions: 25-Pair Bottom Entrance Stub 222.3 mm x 152.4 mm x 123.9 mm 8 3 ⁄ 4 "H x 6"W x 4 7 ⁄ 8 "D 50-Pair Bottom Entrance Stub 355.6 mm x 152.4 mm x 123.9 mm 14"H x 6"W x 4 7 ⁄ 8 "D 100-Pair All Stub Configurations 505.0 mm x 153.9 mm x 123.9 mm 19 7 ⁄ 8 "H x 6 1 ⁄ 16 "W x 4 7 ⁄ 8 "D 100-Pair Bottom Entrance and Top Exit Stubs (No cross-connect field) 273.1 mm x 153.9 mm x 69.85 mm 10 3 ⁄ 4 "H x 6 1 ⁄ 16 "W x 2 3 ⁄ 4 "D 100-Pair RJ-21X Bottom and Bottom Rear Entrance Stubs 505.0 mm x 153.9 mm x 136.5 mm 19 7 ⁄ 8 "H x 6 1 ⁄ 16 "W x 5 3 ⁄ 8 "D ENVIRONMENTAL CHARACTERISTICS: 9/05 • 1332620 Buidling Entrance Terminals 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Building Entrance Terminals High-Density, 5-Pin Protection with KRONE ® Series 2 Blocks Ordering Information Description Catalog Number* 25-pair 5-pin protection building terminal, 6649 1 110-01/ XX bottom entrance stub Quantity: 1 50-pair 5-pin protection building entrance 6649 1 210-01/ XX terminal, bottom entrance stub Quantity: 1 100-pair 5-pin protection building entrance terminal, bottom entrance stub Quantity: 1 5-pin protectors included 6649 1 310-01/ XX 5-pin protectors included; (4) 25-pin Telco 6649 1 313-01/ XX (RJ-21X) connectors mounted on back for fast installation 100-pair 5-pin protection building entrance 6649 1 310-03/ XX terminal, top entrance stub Quantity: 1 100-pair 5-pin protection building entrance terminal, bottom rear entrance stub Quantity: 1 5-pin protectors included 6649 1 310-02/ XX 5-pin protectors included; (4) 25-pin Telco 6649 1 313-02/ XX (RJ-21X) connectors mounted on back for fast installation 100-pair 5-pin protection building entrance 6649 1 310-04/ XX terminal, top rear entrance stub Q uantity: 1 100-pair 5-pin protection building entrance 6649 1 316-05/ XX terminal, protection only, bottom and top entrance stubs Quantity: 1 *XX denotes the length of the cable stub in feet. Replace XX with: 25 = 25' 50 = 50' Other configurations available; please contact ADC Technical Assistance Center MS 2® is a registered trademark of 3M KRONE ® is a registered trademark of ADC Telecommunications, Inc. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 1332620 9/05 Original © 2005 ADC Telecommunications, Inc. All Rights Reserved Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site. SPEC SHEET . protection building entrance 6649 1 310-03/ XX terminal, top entrance stub Quantity: 1 100-pair 5-pin protection building entrance terminal, bottom rear entrance. CHARACTERISTICS: 9/05 • 1332620 Buidling Entrance Terminals 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Building Entrance Terminals High-Density, 5-Pin Protection