DS3 F IBER L OOP C ONVERTER 210/96 444 DS3 Fiber Loop Converter Description The DS3 Fiber Loop Converter (DS3 FLC) is an alternative to high bit-rate DS3 multi- plexers, allowing an economical last mile DS3 transport or a point of presence hand off. The DS3 FLC is a plug and play system that can be configured to maximize facilities utilized for point-to-point or point-to-multipoint topologies and can be optioned for 1:1 protection. The DS3 FLC supports the following applications: • DS3 Hicaps • DS3 Point of Presence (POP) Hand-off • DS3 Video Transport • DS3 ATM Transport The DS3 FLC is a single, modular system. All functions are integrated onto a single printed circuit board. The modular system eliminates common equipment, reduces spare inventory costs and simplifies circuit provisioning and installation. Unlike M1/3 multiplexers, there is better utilization for transporting a clear channel DS3. A maxi- mum of four protected systems or eight unprotected systems can be hubbed out of one universal eight position rack mount chassis. The DS3 FLC can be installed anywhere in the network: a central office (CO), a con- trolled environmental vault (CEV), a hut, an outside plant cabinet, or at the customer premises. The same DS3 FLC module is interchangeable for the central office terminal and remote terminal and for either working or protect channels. One module fits all locations and applications making troubleshooting easy and keeping spare inventory costs to a minimum. The DS3 FLC can be installed in a variety of universal chassis mounting options. At the remote end, the FLC customer premises wall mount chassis is perfect for handing off DS3 hicaps to end users. All four slots can be dedicated to DS3 FLCs to provide either two protected or two unprotected DS3 hicap circuits. ADC’s two position rack mount chassis houses either one protected or one unprotected DS3 circuit. The universal eight position chassis will accommodate four protected DS3s or eight unprotected DS3s. A fully configured unprotected DS3 system is the ideal solution for distance learning applications or DS3 ATM transport. Any combination of ADC Dual Fiber Loop Convert- ers, Quad Fiber Loop Converters and DS3 Fiber Loop Converters can be deployed in the universal chassis allowing the user to mix services and enhance system flexibility. 310/96 444 DS3 Fiber Loop Converter Features and Benefits • Delivery of single transparent DS3 hicap Delivers non-channelized DS3 service • SONET compliant Provides SONET transport • Optional 1:1 redundancy Protection against fiber facility or equipment failures; unprotected circuits can be upgraded later to provide protection, thereby lowering the initial cost of installation • Single card provisioning No need to inventory different working and protect modules, or different near and far-end modules; one part number does it all, reducing investment in spare inventory and simplifying circuit provisioning and installation • Minimum common equipment Low start-up costs to deliver DS3-based services • Compatible with any FOT or multiplexer Configure your network for today and tomorrow • Mixed services deployed from the chassis Provides system flexibility and the ability to deploy both DS3 and DS1 services from a single chassis • End-to-end performance testing with front panel alarm and LED status Simplifies turn-up and troubleshooting Features and Benefits Applications The DS3 FLC is transparent to DS3 frame or format; clear channel DS3 hicaps are a reality. Whether the DS3 is DS2 channelized or a single DS3 rate video channel, the DS3 FLC will transport the signal intact. The DS3 FLC uses SONET multiplexing techniques to provide a smooth transition to SONET networks. The DS3 is mapped using the industry standard (TR-TSY-00253) mapping of a DS3 into an STS-1. DS3 SERVING CENTRAL OFFICE DSX OR DDP* DCS VIDEO CODEC DS3 FLC DS3 HICAP DS3 POP DS3 FLC DS3 FLC CPE SUBSCRIBER NETWORK INTERFACE DS3 FLC The DS3 FLC supports DS3 hicaps (CO to CPE), DS3 point of presence (POP) hand off and DS3 video transport 410/96 444 DS3 Fiber Loop Converter Private Line LAN Interconnect Applications Distributed processing, file serving, bulk data transfer and interactive graphics are evolving market needs. Service providers, with the use of the DS3 FLC, can offer business customers private line point-to-point LAN interconnect services. The DS3 FLC can be utilized cost- effectively for transport of these services through the public network. SERVING CENTRAL OFFICE DS3 FLC SUBSCRIBER NETWORK INTERFACE CPE LAN LAN ROUTER ROUTER DS3 FLC PCPC PC E-MAIL SERVER HOSTFILE SERVER DS3 FLC DSX, DCS OR DDP Applications DS3 SERVING CENTRAL OFFICE DS3 FLC SUBSCRIBER NETWORK INTERFACE CPE DSX OR DDP* SMDS SWITCH DS3 FLC DS3 FLC LAN SMDSU BRIDGER/ ROUTER LAN SMDSU BRIDGER/ ROUTER DS3 FLC DS3 PCPC PC E-MAIL SERVER HOSTFILE SERVER SMDS allows service providers to meet the evolving wide area data connectivity needs of business customers. The DS3 FLC supports the transmission of SMDS service through the network. Along with the ADC Kentrox Switched Multimegabit Data Service Unit (SMDSU), ADC offers you a complete solution for access and transport of SMDS service at both the 1.5 Mbps and 45 Mbps network interface. The ADC Kentrox SMDSU: • Supports access classes of 1-5 from 4 Mbps to 34 Mbps • Performs level 1 and level 2 SMDS packet processing • Converts DTE signal to DS1 or DS3 format • Is an integral DSU/CSU • Provides performance monitoring The DS3 FLC transports information over optics to the SMDS switch in the serving central office. The DS1 QFLC can be used for transport of SMDS service at the 1.5 Mbps network interface. *ADC DIGITAL DISTRIBUTION POINT Switched Multimegabit Data Service (SMDS) Application 510/96 444 DS3 Fiber Loop Converter DS3 Video Distance Learning Applications CENTRAL OFFICE 8 POSITION UNIVERSAL HORIZONTAL MOUNTING SHELF SCHOOL #3 SCHOOL #1 SCHOOL #2 D S 3 F L C W D S 3 F L C W 3/3 SWITCH OPTICAL BUDGET = 13 dB OPTICAL BUDGET = 13 dB FOUR POSITION UNIVERSAL WALL MOUNT D S 3 F L C W D S 3 F L C P OPTICAL BUDGET = 13 dB Video CODEC TWO POSITION RACK MOUNT DS3 VIDEO SIGNAL 110V AC 110V AC Q F L C W 8 POSITION UNIVERSAL HORIZONTAL MOUNTING SHELF T1 Multiplexer AC/DC converter D S 3 F L C W D S 3 F L C P D S 3 F L C W Q F L C W Q F L C W Q F L C W D S 3 F L C W Video CODEC Video CODEC T1 Multiplexer Distance learning provides an effective use of an educator's time and allows a specialist's expertise to be shared across a larger audience as well as the ability to share resources between institutions and offer a broader curriculum to the student body. The DS3 FLC provides high quality video signal transmission that is the most cost-effective solution for DS3 video transport. DS3 ATM Applications DS3 NNI SERVING OFFICE DEMARCATION POINT DS3 FLC DS3 FLC CUSTOMER LOCATION ATM EDGE SWITCH LAN ROUTER ATM NETWORK AAC-3 Service providers can transport high speed ATM services using DS3 FLC at a fraction of the cost of an OC-3 multiplexer. For point-to-point ATM transport applications, ADC's DS3 FLC is the ideal solution. 610/96 444 DS3 Fiber Loop Converter PHYSICAL Dimensions (HxWxD): Weight: ENVIRONMENTAL Temperature Operating: Storage: Humidity Operating: Storage: ELECTRICAL Input Frequency: Input (DSX) Level: Output Frequency: Interface Standard: Line Code: Output Power/Signal: Line Build-Out: OPTICAL Wavelength: Line Rate: Transmit Device: Transmit Power: Connector: Cable: Receiver Dynamic Range: Receiving Device: Optical Budget: POWER Supply Voltage: Supply Current: 10.75" x 1.4" x 10.0" (27.3 x 3.6 x 25.cm) 1.5 lbs (.68 Kg) -40°C to 65°C (-40°F to 150°F) -40°C to 70°C (-40°F to 158°F) 10% to 95% (no condensation) 10% to 95% (no condensation) 44.736 Mbps ± 100 ppm +5.7 to -7.3 dBm 44.736 Mbps ± 20 ppm Bipolar, Return to Zero B3ZS +5.7 dBm to -1.8 dBm with DSX Pulse Shape per ANSI T1.102 LBO In: 0' to 225'; LBO Out: 225' to 450' 1310 nm ± 20 nm 51.84 Mbps Singlemode laser diode -8.0 to -15.0 dBm FC or SC 9/125 µm singlemode -8.0 to -28.0 dBm PIN Photodiode 13 dB -42 to -56 Vdc 250 mA maximum at -48V Specifications 710/96 444 DS3 Fiber Loop Converter Ordering Information Ordering Information Catalog Number DS3-B2LDFC DS3-B2LDSC FRM-RAW08B FRM-FAW08B FRM-FAW02C FWM-RJA0A4 FWM-WWA04A FWM-RJD04B FWM-WWD04B FWM-RJX04A FWM-WWX04A FRM-DS3KIT-8 FWM-DS3KIT-4 FRM-DS3KIT8UN FLC-HDW005 FLC-HDW006 FLC-HDW007 FLC-HDW008 FLC-AC/BB2 FLC-HDW009 FLC-HDW010 Description DS3 Fiber Loop Converter Module Extended temperature (-40 ° C to 65 ° C) FC connector SC connector Rack Mount Chassis Supports up to 8 protected or unprotected DS3 FLC modules, or a combination of DS3 FLC, QFLC and DFLC modules 8 position, rear access chassis, wire-wrap connections* 8 position, front access chassis, wire-wrap connections* 2 position, front access chassis, BNC connectors 23" horizontal mounting chassis, DS3 FLC only Wall Mount Customer Premises Chassis Supports up to 4 protected or unprotected DS3 FLC modules, or a combination of DS3 FLC, QFLC and DFLC modules 4 position, dual redundant AC power supply RJ48X modular jack access Wire-wrap connections 4 position with battery back-up RJ48X modular jack access Wire-wrap connections 4 position, no power supply RJ48X modular jack access Wire-wrap connections Chassis Accessories DS3 protected adapter kit for 8 position rack mount chassis (required for DS3 FLC) DS3 protected adapter kit for 4 position wall mount chassis (required for DS3 FLC) DS3 unprotected adapter kit for 8 position rack mount chassis (required for DS3 FLC) Swing out bracket for 4 position wall mount chassis Rack mount bracket for battery back-up or 4 position chassis Vertical wall mount kit for 2 position chassis Blank front panel kit for 8 position chassis AC power supply and battery back-up system 12.7 amp hours, UL94-V0 3 amp; intended for 2 position chassis Rack mount adapter kit for FLC-HDW009 CLEI Codes SNCUAOK3AA SNCUAOK3AA T1 M0F602RA T1 M0N502RA T1 M0E692RA T1 M0E612RA T1 M0E682RA T1 M0E602RA * Connectorized chassis are available ADC Telecommunications, Inc. 4900 West 78th Street Minneapolis, Minnesota 55435 FAX: (612) 946-3292 From North America, Call Toll Free: 1-800-366-3891 Outside of North America: 612-938-8080 Home Page Address: http://www.adc.com 444 10/96 Original © 1996 ADC Telecommunications, Inc. All Rights Reserved An Equal Opportunity Employer Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. International Sales Offices: Belgium 32-2-721-5282 • United Kingdom 44-734-441955 • Montreal, Quebec (514) 677-9166 • Vancouver, BC (604) 270-1675 • Toronto, Ont. (905) 629-3104 • Ottawa, Ont. (613) 723- 2171 • Singapore 65-225-8228 •Venezuela 58-2-286-1444 • Mexico City, Mexico 525-658-4519 • Buenos Aires, Argentina (541) 449-2669 • Sao Paulo, Brasil 55-11-3040-0666 • Sydney, Australia 61-2-9975-1499 • Melbourne, Australia 61-3-9585-3931 • Beijing, China 86-10-5011856 Ordering Information For information on ADC's complete line of Fiber Loop Converters, contact ADC customer service at 1-800-366-3891. For data sheets and an application guide for ADC Kentrox's DataSMART ™ T1 SMDSU and DataSMART 45 ™ SMDSU, call ADC Kentrox customer service at 1-800-733-5511. DataSMART ™ and DataSMART 45 ™ are trademarks of Kentrox Industries, Inc., a wholly owned subsidiary of ADC Telecommunications, Inc. FPC-SPFC-S-XM FPC-SPSC-S-XM Patch Cords When ordering patch cords, replace X with length of patch cords. FCPC-FCPC SCPC-SCPC DS3 Fiber Loop Converter Ordering Information Catalog Number Description . DS3 F IBER L OOP C ONVERTER 210/96 444 DS3 Fiber Loop Converter Description The DS3 Fiber Loop Converter (DS3 FLC) is an alternative. applications or DS3 ATM transport. Any combination of ADC Dual Fiber Loop Convert- ers, Quad Fiber Loop Converters and DS3 Fiber Loop Converters can be