| Tài liệu tham khảo |
Loại |
Chi tiết |
| [1] H. Ghashochi Bargh and M. H. Sadr (2012). “Stacking sequence optimization of composite plates for maximum fundamental frequency using particle swarm optimization algorithm”. Meccanica, vol. 47, no. 3, pp. 719–730 |
Sách, tạp chí |
| Tiêu đề: |
Stacking sequence optimization of composite plates for maximum fundamental frequency using particle swarm optimization algorithm”. "Meccanica |
| Tác giả: |
H. Ghashochi Bargh and M. H. Sadr |
| Năm: |
2012 |
|
| [2] Y. Narita (2003). “Layerwise optimization for the maximum fundamental frequency of laminated composite plates”. J. Sound Vib., vol. 263, no. 5, pp.1005–1016 |
Sách, tạp chí |
| Tiêu đề: |
Layerwise optimization for the maximum fundamental frequency of laminated composite plates”. "J. Sound Vib |
| Tác giả: |
Y. Narita |
| Năm: |
2003 |
|
| [3] Z. G. Apalak, M. K. Apalak, R. Ekici, and M. Yildirim (2011). “Layer optimization for maximum fundamental frequency of rigid point‐supported laminated composite plates”. Polym. Compos., vol. 32, no. 12, pp. 1988–2000 |
Sách, tạp chí |
| Tiêu đề: |
Layer optimization for maximum fundamental frequency of rigid point‐supported laminated composite plates”. "Polym. Compos |
| Tác giả: |
Z. G. Apalak, M. K. Apalak, R. Ekici, and M. Yildirim |
| Năm: |
2011 |
|
| [4] M. K. Apalak, D. Karaboga, and B. Akay (2014). “The artificial bee colony algorithm in layer optimization for the maximum fundamental frequency of symmetrical laminated composite plates”. Eng. Optim., vol. 46, no. 3, pp. 420–437 |
Sách, tạp chí |
| Tiêu đề: |
The artificial bee colony algorithm in layer optimization for the maximum fundamental frequency of symmetrical laminated composite plates”. "Eng. Optim |
| Tác giả: |
M. K. Apalak, D. Karaboga, and B. Akay |
| Năm: |
2014 |
|
| [5] M. H. Sadr and H. Ghashochi Bargh (2012). “Optimization of laminated composite plates for maximum fundamental frequency using Elitist-Genetic algorithm and finite strip method”. J. Glob. Optim., pp. 1–22 |
Sách, tạp chí |
| Tiêu đề: |
Optimization of laminated composite plates for maximum fundamental frequency using Elitist-Genetic algorithm and finite strip method”. "J. Glob. Optim |
| Tác giả: |
M. H. Sadr and H. Ghashochi Bargh |
| Năm: |
2012 |
|
| [6] U. Topal (2012). “Frequency optimization of laminated composite plates with different intermediate line supports” |
Sách, tạp chí |
| Tiêu đề: |
Frequency optimization of laminated composite plates with different intermediate line supports |
| Tác giả: |
U. Topal |
| Năm: |
2012 |
|
| [7] S.-F. Hwang, Y.-C. Hsu, and Y. Chen (2014). “A genetic algorithm for the optimization of fiber angles in composite laminates”. J. Mech. Sci. Technol., vol. 28, no. 8, pp. 3163–3169 |
Sách, tạp chí |
| Tiêu đề: |
A genetic algorithm for the optimization of fiber angles in composite laminates”. "J. Mech. Sci. Technol |
| Tác giả: |
S.-F. Hwang, Y.-C. Hsu, and Y. Chen |
| Năm: |
2014 |
|
| [8] F. Aymerich and M. Serra (2008). “Optimization of laminate stacking sequence for maximum buckling load using the ant colony optimization (ACO) metaheuristic”. Compos. Part A Appl. Sci. Manuf., vol. 39, no. 2, pp. 262–272 |
Sách, tạp chí |
| Tiêu đề: |
Optimization of laminate stacking sequence for maximum buckling load using the ant colony optimization (ACO) metaheuristic”. "Compos. Part A Appl. Sci. Manuf |
| Tác giả: |
F. Aymerich and M. Serra |
| Năm: |
2008 |
|
| [9] Z. Jing, X. Fan, and Q. Sun (2015). “Stacking sequence optimization of composite laminates for maximum buckling load using permutation search algorithm”. Compos. Struct., vol. 121, pp. 225–236 |
Sách, tạp chí |
| Tiêu đề: |
Stacking sequence optimization of composite laminates for maximum buckling load using permutation search algorithm”. "Compos. Struct |
| Tác giả: |
Z. Jing, X. Fan, and Q. Sun |
| Năm: |
2015 |
|
| [10] V. Ho-Huu, T. D. Do-Thi, H. Dang-Trung, T. Vo-Duy, and T. Nguyen-Thoi (2016). “Optimization of laminated composite plates for maximizing buckling load using improved differential evolution and smoothed finite element method”. Compos. Struct., vol. 146, pp. 132–147 |
Sách, tạp chí |
| Tiêu đề: |
Optimization of laminated composite plates for maximizing buckling load using improved differential evolution and smoothed finite element method”. "Compos. Struct |
| Tác giả: |
V. Ho-Huu, T. D. Do-Thi, H. Dang-Trung, T. Vo-Duy, and T. Nguyen-Thoi |
| Năm: |
2016 |
|
| [11] M. H. Hajmohammad, M. Salari, S. A. Hashemi, and M. H. Esfe (2013). “Optimization of stacking sequence of composite laminates for optimizing buckling load by neural network and genetic algorithm”. Indian J. Sci.Technol., vol. 6, no. 8, pp. 5070–5077 |
Sách, tạp chí |
| Tiêu đề: |
Optimization of stacking sequence of composite laminates for optimizing buckling load by neural network and genetic algorithm”. "Indian J. Sci. "Technol |
| Tác giả: |
M. H. Hajmohammad, M. Salari, S. A. Hashemi, and M. H. Esfe |
| Năm: |
2013 |
|
| [12] S. Adali, A. Richter, V. E. Verijenko, and E. B. Summers (1995). “Optimal design of hybrid laminates with discrete ply angles for maximum buckling load and minimum cost”. Compos. Struct., vol. 32, no. 1–4, pp. 409–415 |
Sách, tạp chí |
| Tiêu đề: |
Optimal design of hybrid laminates with discrete ply angles for maximum buckling load and minimum cost”. "Compos. Struct |
| Tác giả: |
S. Adali, A. Richter, V. E. Verijenko, and E. B. Summers |
| Năm: |
1995 |
|
| [13] Y. Narita and G. J. Turvey (2004). “Maximizing the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimization approach”. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., vol.218, no. 7, pp. 681–691 |
Sách, tạp chí |
| Tiêu đề: |
Maximizing the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimization approach”. "Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci |
| Tác giả: |
Y. Narita and G. J. Turvey |
| Năm: |
2004 |
|
| [14] L. Le-Anh, T. Nguyen-Thoi, V. Ho-Huu, H. Dang-Trung, and T. Bui-Xuan (2015). “Static and frequency optimization of folded laminated composite plates using an adjusted Differential Evolution algorithm and a smoothed triangular plate element”. Compos. Struct., vol. 127, pp. 382–394 |
Sách, tạp chí |
| Tiêu đề: |
Static and frequency optimization of folded laminated composite plates using an adjusted Differential Evolution algorithm and a smoothed triangular plate element”. "Compos. Struct |
| Tác giả: |
L. Le-Anh, T. Nguyen-Thoi, V. Ho-Huu, H. Dang-Trung, and T. Bui-Xuan |
| Năm: |
2015 |
|
| [15] H. Ghasemi, P. Kerfriden, S. P. A. Bordas, J. Muthu, G. Zi, and T. Rabczuk (2015). “Interfacial shear stress optimization in sandwich beams with polymeric core using non-uniform distribution of reinforcing ingredients”.Compos. Struct., vol. 120, pp. 221–230 |
Sách, tạp chí |
| Tiêu đề: |
Interfacial shear stress optimization in sandwich beams with polymeric core using non-uniform distribution of reinforcing ingredients”. "Compos. Struct |
| Tác giả: |
H. Ghasemi, P. Kerfriden, S. P. A. Bordas, J. Muthu, G. Zi, and T. Rabczuk |
| Năm: |
2015 |
|
| [16] H. Ghasemi, R. Brighenti, X. Zhuang, J. Muthu, and T. Rabczuk (2015). “Optimal fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach”. Struct.Multidiscip. Optim., vol. 51, no. 1, pp. 99–112 |
Sách, tạp chí |
| Tiêu đề: |
Optimal fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach”. "Struct. "Multidiscip. Optim |
| Tác giả: |
H. Ghasemi, R. Brighenti, X. Zhuang, J. Muthu, and T. Rabczuk |
| Năm: |
2015 |
|
| [18] H.-K. Cho (2013). “Design optimization of laminated composite plates with static and dynamic considerations in hygrothermal environments”. Int. J.Precis. Eng. Manuf., vol. 14, no. 8, pp. 1387–1394 |
Sách, tạp chí |
| Tiêu đề: |
Design optimization of laminated composite plates with static and dynamic considerations in hygrothermal environments”. "Int. J. "Precis. Eng. Manuf |
| Tác giả: |
H.-K. Cho |
| Năm: |
2013 |
|
| [19] Q. Liu (2016). “Exact sensitivity analysis of stresses and lightweight design of Timoshenko composite beams”. Compos. Struct., vol. 143, pp. 272–286 |
Sách, tạp chí |
| Tiêu đề: |
Exact sensitivity analysis of stresses and lightweight design of Timoshenko composite beams”. "Compos. Struct |
| Tác giả: |
Q. Liu |
| Năm: |
2016 |
|
| [20] H.-T. Fan, H. Wang, and X.-H. Chen (2016). “An optimization method for composite structures with ply-drops”. Compos. Struct., vol. 136, pp. 650–661 |
Sách, tạp chí |
| Tiêu đề: |
An optimization method for composite structures with ply-drops”. "Compos. Struct |
| Tác giả: |
H.-T. Fan, H. Wang, and X.-H. Chen |
| Năm: |
2016 |
|
| [21] R. Storn and K. Price (1997). “Differential evolution–a simple and efficient heuristic for global optimization over continuous spaces”. J. Glob. Optim., vol.11, no. 4, pp. 341–359 |
Sách, tạp chí |
| Tiêu đề: |
Differential evolution–a simple and efficient heuristic for global optimization over continuous spaces”. "J. Glob. Optim |
| Tác giả: |
R. Storn and K. Price |
| Năm: |
1997 |
|