Extended galerkin meshfree methods for fracture modeling in advanced funtional composite materials ((theses)

VIETNAM NATIONAL UNIVERSITY HO CHI MINH CITY HO CHI MINH CITY UNIVERSITY OF TECHNOLOGY NGUYỄN THANH NHÃ EXTENDED GALERKIN MESHFREE METHODS FOR FRACTURE MODELING IN ADVANCED FUNCTIONAL COMPOSITE MATERIALS PHD THESIS IN ENGINEERING HO CHI MINH CITY - 2018 VIETNAM NATIONAL UNIVERSITY HO CHI MINH CITY HO CHI MINH CITY UNIVERSITY OF TECHNOLOGY NGUYỄN THANH NHÃ EXTENDED GALERKIN MESHFREE METHODS FOR FRACTURE MODELING IN ADVANCED FUNCTIONAL COMPOSITE MATERIALS Major Subject: Engineering Mechanics Codes: 62 52 02 01 Independent Examiner 1: Assoc Prof Dr Nguyễn Xuân Hùng Independent Examiner 2: Assoc Prof Dr Nguyễn Mạnh Cường Examiner 1: Assoc Prof Dr Nguyễn Đình Kiên Examiner 2: Assoc Prof Dr Lê Văn Cảnh Examiner 3: Assoc Prof Dr Lương Văn Hải SCIENTIFIC SUPERVISORS: Assoc Prof Dr Trương Tích Thiện Assoc Prof Dr Bùi Quốc Tính DECLARATION The thesis content is based on my original research work in the Department of Engineering Mechanics, Faculty of Applied Science, Ho Chi Minh city University of Technology, VNU – HCM, Vietnam I declare surely that this document has been created by myself and that has not been submitted for any other degree or qualification except as specified Author Nguyễn Thanh Nhã i ABSTRACT This thesis deals with the numerical computation of 2-D linear fracture problems using the two extended Galerkin meshless methods including radial point interpolation method (RPIM) and improved moving Kriging (MK) interpolation method Enrichment techniques including the use of step function for crack faces, standard branch functions and new linear ramp function for crack tip are first applied in RPIM and MK meshless frameworks The meshless moving Kriging method is improved by using three types of correlation function (i.e quartic polynomial, truncated quartic polynomial and Gaussian functions) to eliminate the effect of the user numerical experience parameter and applied to crack problems The developed methods are applied for crack analyzing in several types of material including isotropic, orthotropic and functionally graded composite materials Various crack problems such as static, dynamic behavior of crack models and quasi-static crack propagation are numerically investigated and compared with solutions given by analytical, experiment or other numerical methods The agreements between the obtained results using extended meshless methods and those of other methods show the correction of the developed approaches ii ACKNOWLEDGEMENTS This doctoral dissertation is the outcome of many years working at the Department of Engineering Mechanics (DEM), Faculty of Applied Science, Ho Chi Minh City University of Technology I would like to sincerely thank my principal supervisor Assoc Prof Truong Tich Thien for his helpful advices and guidance during my study work I express my special gratitude to my scientific supervisor Assoc Prof Bui Quoc Tinh from the Department of Civil and Environmental Engineering, Tokyo Institute of Technology, Japan, for his invaluable support, guidance and mentoring I deeply thank all my supervisors for offering me the opportunity to conduct this research work I also would like to thank Assoc Prof Nguyen Luong Dung, Prof Ngo Kieu Nhi, Assoc Prof Vu Cong Hoa and other members for their useful advice and supports, and for creating such a friendly and comfortable working atmosphere In addition, I am grateful for the support from my department colleagues, Nguyen Thai Hien, Tran Thai Duong, Nguyen Duy Khuong, Tran Kim Bang, Le Duong Hung Anh who has been always with me in difficult times Special thanks go to my close colleague and friend, Nguyen Ngoc Minh, for his useful discussions, ideas and programming experience Last but not least, I would like to express my profound gratefulness to my family, especially my parents, my wife Nguyen Thi My Hien and my sons Nguyen Quang Khai, Nguyen Minh Quoc Without their continuous encouragement, support and love, I would not have been able to pursue my work and ambition Ho Chi Minh City, July 2018 Nguyen Thanh Nha iii CONTENTS DECLARATION i ABSTRACT ii ACKNOWLEDGEMENTS iii LIST OF FIGURES ix LIST OF TABLES xvi NOMENCLATURE xvii CHAPTER INTRODUCTION AND OBJECTIVE 1.1 Statement of crack problems 1.2 Advanced functional composite materials 1.3 Literature review 1.3.1 Extended Finite Element method (XFEM) 1.3.2 Extended Meshfree approach 1.4 Fundamental of Fracture Mechanics 1.4.1 Crack behavior in isotropic 1.4.2 Crack behavior in orthotropic materials .12 1.4.3 Crack behavior in functionally graded materials 14 1.5 Objective of the dissertation 15 1.6 Outline of the thesis 16 CHAPTER EXTENDED MESHFREE GALERKIN METHODS FOR FRACTURE MECHANICS 18 2.1 The Radial Point Interpolation method (RPIM) 18 iv 2.2 Enrichment methods 21 2.2.1 Enrichment for discontinue crack faces .21 2.2.2 Standard enrichment for crack tip using branch functions 22 2.2.3 New enrichment for crack tip using ramp function .24 2.2.4 Apply to crack propagation problems 26 2.3 Meshfree Galerkin method for fracture problems and solution procedure28 2.3.1 Fundamental equations of elastic problems 28 2.3.2 Discrete equations for fracture problem .30 2.4 General J-integral (static and dynamic) 32 2.5 Numerical integration 36 2.6 Numerical implementation procedure 36 2.6.1 Implementation procedure for quasi-static crack growth problem 36 2.6.2 Implementation procedure for dynamic crack problem (stationary state) 38 2.7 Summary 39 CHAPTER X-RPIM FOR QUASI-STATIC CRACK GROWTH SIMULATION OF 2-D SOLIDS 40 3.1 Introduction 40 3.2 Crack growth and the SIFs implementation in isotropic material 43 3.3 Accuracy study 46 3.3.1 Mode I: Single edge-crack plate under tensile loading 46 3.3.2 Mixed-mode: Single edge-crack plate under uniform shear loading 49 3.4 Numerical examples for crack growth problems 51 v 3.4.1 Crack growth from a fillet 53 3.4.2 Crack growth in a perforated panel with a circular hole 57 3.5 Conclusions 59 CHAPTER TRANSIENT DYNAMIC CRACK ANALYSIS OF ISOTROPIC AND COMPOSITE MATERIALS 61 4.1 Introduction 61 4.2 Evaluation of dynamic stress intensity factors for isotropic solids 64 Remark 1: .66 4.3 Transient dynamic crack analysis of isotropic solids 66 Remark 2: .67 4.3.1 Accuracy study of the SIFs in cracked isotropic plates .67 4.3.2 A semi-infinite edge crack under dynamic loading .72 4.3.3 Mixed-mode analysis of a slanted edge-cracked rectangular plate .80 4.3.4 Mixed-mode analysis of a cracked pipe .84 4.3.5 A complex structure with an edge crack 89 4.4 Transient dynamic crack analysis of orthotropic composites 91 4.4.1 Orthotropic enrichment functions for crack 92 4.4.2 Evaluation of dynamic stress intensity factors for orthotropic composites 92 4.5 Numerical results and discussion 94 4.5.1 Accuracy study of the SIFs of orthotropic composite 94 4.5.2 An edge crack in an orthotropic composite plate under dynamic loading 95 4.5.3 A center crack in an orthotropic composite plate under dynamic loading 98 vi 4.6 Crack growth in orthotropic model 101 4.6.1 Criterion for crack growth direction in orthotropic model 101 4.6.2 Predicting for propagation angle in an edge crack orthotropic plate 101 4.7 Conclusions 103 CHAPTER EXTENDED MESHLESS RADIAL POINT INTERPOLATION METHOD FOR FRACTURE ANALYSIS OF FGMs 105 5.1 Introduction 105 5.2 The interaction integral formulation for non-homogenous materials 108 5.2.1 Non-equilibrium formulation for FGM model 109 5.2.2 Extract SIFs for FGM model .111 5.3 Accuracy study of SIFs in FGM crack models 113 5.3.1 Single edge crack plate under mode I 113 5.3.2 Mixed-mode edge crack problem 116 5.3.3 Slant edge crack problem 119 5.4 Dynamic SIFs calculation for FGM crack models 121 5.4.1 FGM plate with center crack under dynamic tensile loading (case 1: x1-x2 FGM) 121 5.4.2 FGM plate with center crack under dynamic tensile loading (case 2: x2 FGM) 124 5.5 Conclusions 129 CHAPTER IMPROVED EXTENDED MESHLESS MOVING KRIGING FOR FRACTURE MODELING OF SOLIDS AND FGMs 130 6.1 Introduction to the moving Kriging method 130 vii 6.1.1 The moving Kriging shape function 131 Remark 3: .133 6.1.2 The improved moving Kriging shape functions 133 6.2 Improved X-MK for crack analysis of isotropic material 136 6.2.1 Accuracy study on static SIFs in solid .137 6.2.2 Dynamic crack analysis of isotropic material 141 6.3 Improved X-MK for dynamic crack analysis of FGM material 146 6.3.1 Rectangular x1-x2-FGM plate with center crack under dynamic tensile loading 146 6.3.2 Inclined center crack FGM plate under dynamic tensile loading 149 6.3.3 Dynamic crack in complex FGM model 152 6.4 Discussion 155 CHAPTER CONCLUSIONS AND OUTLOOKS 157 7.1 Conclusions 157 7.2 Outlooks 158 LIST OF PUBLICATIONS 160 REFERENCES 162 viii functions totally removes the effect of the user numerical experience parameter for MK shape function The proposed X-RPIM method has shown a good performance for static SIFs calculation and quasi-static crack growth analysis in isotropic model, as mentioned in Chapter In Chapter 4, the X-RPIM approach once again shows its potential application for dynamic SIFs computation for both isotropic and orthotropic materials The quasi-static crack growth simulation in orthotropic media using the X-RPIM approach is also presented in Chapter Finally, the obtained results of static and dynamic SIFs in crack problems of nonhomogenous material in Chapter and Chapter show the completion of X-RPIM and X-MK for such problems To perform the analysis for FGM models, the proposed XRPIM and X-MK methods are more convenient than the traditional FEM, for instance, there is no need to the interpolation to obtain the graded material properties at a point of interest The graded material properties can be directly computed from the known material function at that point 7.2 Outlooks According to the results obtained in this thesis, the present methods have shown to be very dominant for crack analysis in various types of material such as isotropic, orthotropic and functionally graded materials There are some further development related to this study can be addressed as follows:  The present method is very potential in dealing with the crack propagation problems in other advanced materials and complicated structures in real life problem  Basing on the numerical algorithm developed in this study, the proposed methods can be developed for 3-D crack problems  The present work can be further improved either by integrating the adaptive meshfree integration technique [128] to enhance the accuracy  The integration task in the proposed X-RPIM and X-MK can be improved by using the Cartesian transformation method (CTM) [33, 129] into, which is to avoid the need for a background cell and to make them become truly meshless method 158  More challenging tasks based on this work to be tackled may fall into the analysis of transient cracks response of smart functional materials for thermal shock crack or interface cracks, for instance, see [60-62, 130-132]  In addition to the future works, dynamic crack propagation in solids and composites, especially dynamic crack modeling in quasi-brittle materials like concrete or rock, e.g., see [133-135] would also be the other interesting research direction 159 LIST OF PUBLICATIONS ISI peer-reviewed Journals N T Nguyen, T Q Bui, C Zhang, and T T Truong, "Crack growth modeling in elastic solids by the extended meshfree Galerkin radial point interpolation method," Engineering Analysis with Boundary Elements, vol 44, pp 87-97, 2014 N T Nguyen, T Q Bui, and T T Truong, "Transient dynamic fracture analysis by an extended meshfree method with different crack-tip enrichments," Meccanica, vol 52, pp 2363-2390, 2017 T Q Bui, N T Nguyen, L V Le, M N Nguyen and T T Truong, “Analysis of transient dynamic fracture parameters of cracked functionally graded composites by improved meshfree methods,” Theoretical and Applied Fracture Mechanics, vol 96, pp 642-657, 2017 ISI peer-reviewed Journal (not directly related to the thesis) M N Nguyen, T.Q Bui, N T Nguyen, T T Truong, V.L Le, “Simulation of dynamic and static thermoelastic fracture problems by extended nodal gradient finite elements,” International Journal of Mechanical Sciences, vol 134, pp 370-386, 2017 National Journals N T Nguyen, B K Tran, T Q Bui, and T T Truong, “Extended Radial Point Interpolation Method for dynamic crack analysis in functionally graded materials,” Science & Technology Development Journal, vol 18, pp 59-64, 2015 N T Nguyen, B K Tran, T Q Bui, and T T Truong, “Extended Radial Point Interpolation Method for crack analysis in orthotropic media,” Science & Technology Development Journal, vol 18, pp 5-13, 2015 N T Nguyen, T Q Bui, and T T Truong, “Enriched radial point interpolation method for stress intensity factors calculation in 2D elasto-dynamic cracked problem,” Journal of Science and Technology, vol 52(5C), pp 48-59, 2014 160 N T Nguyen, B K Tran, T Q Bui, and T T Truong, “Elastostatic analysis of isotropic and orthotropic functionally graded structures by meshfree radial point interpolation method,” Journal of Science and Technology, vol 52(5C), pp 1-15, 2014 International Conference paper N T Nguyen, M N Nguyen, T T Truong and T Q Bui, “Dynamic crack analysis of fgm using an extended meshfree moving kriging method,” in The 11th SEATUC Symposium, HCM City - Vietnam, 2017 National Conference papers 10 N T Nguyen, M N Nguyen, T Q Bui and T T Truong, “Extended radial point interpolation method for static and dynamic crack problems in orthotropic material,” in Hội nghị Khoa học toàn quốc Vật liệu và Kết cấu Composite - Cơ học, Công nghệ và ứng dụng, Nha Trang - Việt Nam, 2016 11 N T Nguyen, T Q Bui and T T Truong “Extended moving Kriging interpolation for crack growth in functionally graded materials,” in Hội nghị Khoa học toàn quốc Cơ học Vật rắn biến dạng lần thứ XII, Đà Nẵng - Việt Nam, 2015 12 N T Nguyen, B K Tran, T Q Bui, and T T Truong “Extend radial point interpolation method for analysis of stress intensity factors in FGM fracture problems,” in Hội nghị Cơ học kỹ thuật toàn quốc, Hà Nội - Việt Nam, 2014 13 N T Nguyen, H T Nguyen, T Q Bui and T T Truong, “Meshfree radial point interpolation method for elastostatic analysis of isotropic and orthotropic functionally graded structures,” in Hội nghị Cơ học kỹ thuật toàn quốc, Hà Nội Việt Nam, 2014 161 REFERENCES [1] E E Gdoutos, Fracture Mechanicss: An Introduction, 2005 [2] Y Miyamoto, W A Kaysser, B H Rabin, A Kawasaki, and R G Ford, Functionally graded materials: Design, processing and applications: Kluwer Academic Publishers, Hingham, MA (US), 1999 [3] J.-H Kim and G H Paulino, "Isoparametric Graded Finite Elements for Nonhomogeneous Isotropic and Orthotropic Materials," Journal of Applied Mechanics, vol 69, pp 502-514, 2002 [4] M T Tilbrook, K Rozenburg, E D Steffler, L Rutgers, and M Hoffman, "Crack propagation paths in layered, graded composites," Composites Part B: Engineering, vol 37, pp 490-498, 2006 [5] O C Zienkiewicz and R L Taylor, The Finite Element Method - Volume 1: The Basis, fifth edition ed.: Butterworth - Heinemann, 2000 [6] A Trädegård, F Nilsson, and S Östlund, "FEM-remeshing technique applied to crack growth problems," Computer Methods in Applied Mechanics and Engineering, vol 160, pp 115-131, 1998 [7] T.-P Fries and T Belytschko, "The extended/generalized finite element method: An overview of the method and its applications," International Journal for Numerical Methods in Engineering, vol 84, pp 253-304, 2010 [8] R H J Peerlings, R De Borst, W A M Brekelmans, and J H P De Vree, "Gradient-enhanced damage for quasi-brittle materials," International Journal for Numerical Methods in Engineering, vol 39, pp 3391-3403, 1996 [9] C Kuhn and R Müller, "A continuum phase field model for fracture," Engineering Fracture Mechanics, vol 77, pp 3625-3634, 2010 [10] C Miehe, M Hofacker, and F Welschinger, "A phase field model for rateindependent crack propagation: Robust algorithmic implementation based on operator splits," Computer Methods in Applied Mechanics and Engineering, vol 199, pp 2765-2778, 2010 [11] N Moës, J Dolbow, and T Belytschko, "A finite element method for crack growth without remeshing," International Journal for Numerical Methods in Engineering, vol 46, pp 131-150, 1999 [12] A Asadpoure, S Mohammadi, and A Vafai, "Crack analysis in orthotropic media using the extended finite element method," Thin-Walled Structures, vol 44, pp 1031-1038, 2006 162 [13] H Bayesteh and S Mohammadi, "XFEM fracture analysis of orthotropic functionally graded materials," Composites Part B: Engineering, vol 44, pp 825, 2013 [14] J F Unger, S Eckardt, and C Könke, "Modelling of cohesive crack growth in concrete structures with the extended finite element method," Computer Methods in Applied Mechanics and Engineering, vol 196, pp 4087-4100, 2007 [15] R Huang, N Sukumar, and J H Prévost, "Modeling quasi-static crack growth with the extended finite element method Part II: Numerical applications," International Journal of Solids and Structures, vol 40, pp 7539-7552, 2003 [16] H Bayesteh and S Mohammadi, "XFEM fracture analysis of shells: The effect of crack tip enrichments," Computational Materials Science, vol 50, pp 27932813, 2011 [17] L Zhao, J Zhi, J Zhang, Z Liu, and N Hu, "XFEM simulation of delamination in composite laminates," Composites Part A: Applied Science and Manufacturing, vol 80, pp 61-71, 2016 [18] J Réthoré, A Gravouil, and A Combescure, "An energy-conserving scheme for dynamic crack growth using the eXtended finite element method," International Journal for Numerical Methods in Engineering, vol 63, pp 631-659, 2005 [19] I Nistor, O Pantalé, and S Caperaa, "Numerical implementation of the eXtended Finite Element Method for dynamic crack analysis," Advances in Engineering Software, vol 39, pp 573-587, 2008 [20] T Elguedj, A Gravouil, and H Maigre, "An explicit dynamics extended finite element method Part 1: Mass lumping for arbitrary enrichment functions," Computer Methods in Applied Mechanics and Engineering, vol 198, pp 22972317, 2009 [21] G Ventura, E Budyn, and T Belytschko, "Vector level sets for description of propagating cracks in finite elements," International Journal for Numerical Methods in Engineering, vol 58, pp 1571-1592, 2003 [22] G R Liu, Meshfree Methods: Moving Beyond the Finite Element Method, Second ed.: Taylor and Francis, 2010 [23] N M Nguyen, "Numerical modeling of propagating cracks using the NURBSbased extended finite element method," Matser, Ruhr University Bochum, 2011 [24] T Belytschko, Y Y Lu, and L Gu, "Element-free Galerkin methods," International Journal for Numerical Methods in Engineering, vol 37, pp 229256, 1994 [25] N S Atluri and T Zhu, "A new Meshless Local Petrov-Galerkin (MLPG) approach in computational mechanics," Computational Mechanics, vol 22, pp 117-127, 1998 163 [26] W K Liu, S Jun, S Li, J Adee, and T Belytschko, "Reproducing kernel particle methods for structural dynamics," International Journal for Numerical Methods in Engineering, vol 38, pp 1655-1679, 1995 [27] J G Wang and G R Liu, "A point interpolation meshless method based on radial basis functions," International Journal for Numerical Methods in Engineering, vol 54, pp 1623-1648, 2002 [28] L Gu, "Moving kriging interpolation and element-free Galerkin method," International Journal for Numerical Methods in Engineering, vol 56, pp 1-11, 2003 [29] M Fleming, Y A Chu, B Moran, and T Belytschko, "Enriched element-free Galerkin methods for crack tip fields," International Journal for Numerical Methods in Engineering, vol 40, pp 1483-1504, 1997 [30] Y T Gu, W Wang, L C Zhang, and X Q Feng, "An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields," Engineering Fracture Mechanics, vol 78, pp 175-190, 2011 [31] Y T Gu, "An Enriched Radial Point Interpolation Method Based on Weak-Form and Strong-Form," Mechanics of Advanced Materials and Structures, vol 18, pp 578-584, 2011 [32] T Q Bui, M N Nguyen, and C Zhang, "An efficient meshfree method for vibration analysis of laminated composite plates," Computational Mechanics, vol 48, pp 175-193, 2011 [33] T Q Bui, A Khosravifard, C Zhang, M R Hematiyan, and M V Golub, "Dynamic analysis of sandwich beams with functionally graded core using a truly meshfree radial point interpolation method," Engineering Structures, vol 47, pp 90-104, 2013 [34] G Ventura, J X Xu, and T Belytschko, "A vector level set method and new discontinuity approximations for crack growth by EFG," International Journal for Numerical Methods in Engineering, vol 54, pp 923-944, 2002 [35] T Belytschko, Y Krongauz, D Organ, M Fleming, and P Krysl, "Meshless methods: An overview and recent developments," Computer Methods in Applied Mechanics and Engineering, vol 139, pp 3-47, 1996 [36] J Milllard W Johnson, "Theory of Elasticity of an Anisotropic Elastic Body (S G Lekhnitskii)," SIAM Review, vol 9, pp 136-136, 1967 [37] S S Ghorashi, S Mohammadi, and S.-R Sabbagh-Yazdi, "Orthotropic enriched element free Galerkin method for fracture analysis of composites," Engineering Fracture Mechanics, vol 78, pp 1906-1927, 2011 164 [38] L Bouhala, A Makradi, and S Belouettar, "Thermal and thermo-mechanical influence on crack propagation using an extended mesh free method," Engineering Fracture Mechanics, vol 88, pp 35-48, 2012 [39] S Kumar, I V Singh, B K Mishra, and A Singh, "New enrichments in XFEM to model dynamic crack response of 2-D elastic solids," International Journal of Impact Engineering, vol 87, pp 198-211, 2016 [40] G R Liu and Y T Gu, An Introduction to Meshfree Methods and Their Programming: Springer Netherlands, 2005 [41] N T Nguyen, T Q Bui, C Zhang, and T T Truong, "Crack growth modeling in elastic solids by the extended meshfree Galerkin radial point interpolation method," Engineering Analysis with Boundary Elements, vol 44, pp 87-97, 2014 [42] M R R Seabra, J M A Cesar de Sa, P Šuštarič, and T Rodič, "Some numerical issues on the use of XFEM for ductile fracture," Computational Mechanics, vol 50, pp 611-629, 2012 [43] X Liu, H Waisman, and J Fish, "A new crack tip enrichment function in the extended finite element method for general inelastic materials," vol 10, pp 343360, 2012 [44] J Dolbow, N Moës, and T Belytschko, "Discontinuous enrichment in finite elements with a partition of unity method," Finite Elements in Analysis and Design, vol 36, pp 235-260, 2000 [45] T Menouillard, J.-H Song, Q Duan, and T Belytschko, "Time dependent crack tip enrichment for dynamic crack propagation," International Journal of Fracture, vol 162, pp 33-49, 2010 [46] R d Borst, J J C Remmers, and A Needleman, "Mesh-independent discrete numerical representations of cohesive-zone models," Engineering Fracture Mechanics, vol 73, pp 160-177, 2006 [47] P Liu, T Q Bui, C Zhang, T T Yu, G R Liu, and M V Golub, "The singular edge-based smoothed finite element method for stationary dynamic crack problems in 2D elastic solids," Computer Methods in Applied Mechanics and Engineering, vol 233–236, pp 68-80, 2012 [48] J R Rice, "A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks," Journal of Applied Mechanics, vol 35, pp 379-386, 1968 [49] I S Raju and K N Shivakumar, "An equivalent domain integral method in the two-dimensional analysis of mixed mode crack problems," Engineering Fracture Mechanics, vol 37, pp 707-725, 1990 165 [50] N Sukumar, N Moës, B Moran, and T Belytschko, "Extended finite element method for three-dimensional crack modelling," International Journal for Numerical Methods in Engineering, vol 48, pp 1549-1570, 2000 [51] T Belytschko and T Black, "Elastic crack growth in finite elements with minimal remeshing," International Journal for Numerical Methods in Engineering, vol 45, pp 601-620, 1999 [52] M H Aliabadi, "Boundary Element Formulations in Fracture Mechanics," Applied Mechanics Reviews, vol 50, pp 83-96, 1997 [53] I Guiamatsia, B G Falzon, G A O Davies, and L Iannucci, "Element-Free Galerkin modelling of composite damage," Composites Science and Technology, vol 69, pp 2640-2648, 2009 [54] R A Gingold and J J Monaghan, "Smoothed particle hydrodynamics: theory and application to non-spherical stars," Monthly Notices of the Royal Astronomical Society, vol 181, pp 375-389, 1977 [55] F Erdogan and G C Sih, "On the Crack Extension in Plates Under Plane Loading and Transverse Shear," Journal of Basic Engineering, vol 85, pp 519525, 1963 [56] Y Sumi, C Yang, and Z N Wang, "Morphological aspects of fatigue crack propagation Part II—effects of stress biaxiality and welding residual stress," International Journal of Fracture, vol 82, pp 221-235, 1996 [57] E D Leonel and W S Venturini, "Multiple random crack propagation using a boundary element formulation," Engineering Fracture Mechanics, vol 78, pp 1077-1090, 2011 [58] T Nishioka and S N Atluri, "On the computation of mixed-mode K-factors for a dynamically propagating crack, using path-independent integrals J'k," Engineering Fracture Mechanics, vol 20, pp 193-208, 1984 [59] P Fedeliński, "Boundary element method in dynamic analysis of structures with cracks," Engineering Analysis with Boundary Elements, vol 28, pp 1135-1147, 2004 [60] T Q Bui and C Zhang, "Analysis of generalized dynamic intensity factors of cracked magnetoelectroelastic solids by X-FEM," Finite Elements in Analysis and Design, vol 69, pp 19-36, 2013 [61] T Q Bui, "Extended isogeometric dynamic and static fracture analysis for cracks in piezoelectric materials using NURBS," Computer Methods in Applied Mechanics and Engineering, vol 295, pp 470-509, 2015 [62] T Q Bui, S Hirose, C Zhang, T Rabczuk, C.-T Wu, T Saitoh, et al., "Extended isogeometric analysis for dynamic fracture in multiphase 166 piezoelectric/piezomagnetic composites," Mechanics of Materials, vol 97, pp 135-163, 2016 [63] P H Wen and M H Aliabadi, "Evaluation of mixed-mode stress intensity factors by the mesh-free Galerkin method: Static and dynamic," The Journal of Strain Analysis for Engineering Design, vol 44, pp 273-286, 2009 [64] S Tanaka, S Sannomaru, M Imachi, S Hagihara, S Okazawa, and H Okada, "Analysis of dynamic stress concentration problems employing spline-based wavelet Galerkin method," Engineering Analysis with Boundary Elements, vol 58, pp 129-139, 2015 [65] T Rabczuk and T Belytschko, "Cracking particles: a simplified meshfree method for arbitrary evolving cracks," International Journal for Numerical Methods in Engineering, vol 61, pp 2316-2343, 2004 [66] T Rabczuk and T Belytschko, "A three-dimensional large deformation meshfree method for arbitrary evolving cracks," Computer Methods in Applied Mechanics and Engineering, vol 196, pp 2777-2799, 2007 [67] T Rabczuk, P M A Areias, and T Belytschko, "A simplified mesh-free method for shear bands with cohesive surfaces," International Journal for Numerical Methods in Engineering, vol 69, pp 993-1021, 2007 [68] T Rabczuk, G Zi, S Bordas, and H Nguyen-Xuan, "A simple and robust threedimensional cracking-particle method without enrichment," Computer Methods in Applied Mechanics and Engineering, vol 199, pp 2437-2455, 2010 [69] S Tanaka, H Suzuki, S Sadamoto, S Sannomaru, T Yu, and T Q Bui, "Jintegral evaluation for 2D mixed-mode crack problems employing a meshfree stabilized conforming nodal integration method," Computational Mechanics, vol 58, pp 185-198, 2016 [70] T Rabczuk, S Bordas, and G Zi, "A three-dimensional meshfree method for continuous multiple-crack initiation, propagation and junction in statics and dynamics," Computational Mechanics, vol 40, pp 473-495, 2007 [71] G Zi, T Rabczuk, and W Wall, "Extended meshfree methods without branch enrichment for cohesive cracks," Computational Mechanics, vol 40, pp 367382, 2007 [72] T Rabczuk and G Zi, "A Meshfree Method based on the Local Partition of Unity for Cohesive Cracks," Computational Mechanics, vol 39, pp 743-760, 2007 [73] S Bordas, T Rabczuk, and G Zi, "Three-dimensional crack initiation, propagation, branching and junction in non-linear materials by an extended meshfree method without asymptotic enrichment," Engineering Fracture Mechanics, vol 75, pp 943-960, 2008 167 [74] T Rabczuk, S Bordas, and G Zi, "On three-dimensional modelling of crack growth using partition of unity methods," Computers & Structures, vol 88, pp 1391-1411, 2010 [75] S Mohammadi, Extended finite element method for fracture analysis of structures: Blackwell Publishing, 2008 [76] T Menouillard and T Belytschko, "Dynamic fracture with meshfree enriched XFEM," Acta Mechanica, vol 213, pp 53-69, 2010 [77] A Asadpoure and S Mohammadi, "Developing new enrichment functions for crack simulation in orthotropic media by the extended finite element method," International Journal for Numerical Methods in Engineering, vol 69, pp 21502172, 2007 [78] J.-H Kim and G H Paulino, "The interaction integral for fracture of orthotropic functionally graded materials: evaluation of stress intensity factors," International Journal of Solids and Structures, vol 40, pp 3967-4001, 2003 [79] D Motamedi and S Mohammadi, "Dynamic analysis of fixed cracks in composites by the extended finite element method," Engineering Fracture Mechanics, vol 77, pp 3373-3393, 2010 [80] F García-Sánchez, C Zhang, and A Sáez, "A two-dimensional time-domain boundary element method for dynamic crack problems in anisotropic solids," Engineering Fracture Mechanics, vol 75, pp 1412-1430, 2008 [81] V E Saouma, M L Ayari, and D A Leavell, "Mixed mode crack propagation in homogeneous anisotropic solids," Engineering Fracture Mechanics, vol 27, pp 171-184, 1987/01/01/ 1987 [82] L M A Cahill, S Natarajan, S P A Bordas, R M O’Higgins, and C T McCarthy, "An experimental/numerical investigation into the main driving force for crack propagation in uni-directional fibre-reinforced composite laminae," Composite Structures, vol 107, pp 119-130, 2014 [83] M Naebe and K Shirvanimoghaddam, "Functionally graded materials: A review of fabrication and properties," Applied Materials Today, vol 5, pp 223-245, 2016 [84] M Koizumi, "The concept of FGM," Ceram Trans Funct Grad Mater vol 34, pp 3-10, 1993 [85] J Sladek, V Sladek, and C Zhang, "An advanced numerical method for computing elastodynamic fracture parameters in functionally graded materials," Computational Materials Science, vol 32, pp 532-543, 2005 [86] V T Do, H Hirakata, T Kitamura, V T Vuong, and V L Le, "Evaluation of interfacial toughness curve of bimaterial in submicron scale," International Journal of Solids and Structures, vol 49, pp 1676-1684, 2012 168 [87] L V Lich and D V Truong, "Plastic stress singularity near interface edge of elasto-plastic/elastic bi-material," Computational Materials Science, vol 78, pp 140-146, 2013 [88] V L Le, T Sumigawa, V T Do, and T Kitamura, "Crack initiation site at the interface between a nano-component and substrate," Mechanical Engineering Journal, vol 1, pp SMM0048-SMM0048, 2014 [89] F Delale and F Erdogan, "The Crack Problem for a Nonhomogeneous Plane," Journal of Applied Mechanics, vol 50, pp 609-614, 1983 [90] J W Eischen, "Fracture of nonhomogeneous materials," International Journal of Fracture, vol 34, pp 3-22, 1987 [91] Z.-H Jin and N Noda, "Crack-Tip Singular Fields in Nonhomogeneous Materials," Journal of Applied Mechanics, vol 61, pp 738-740, 1994 [92] C Li, G J Weng, Z Duan, and Z Zou, "Dynamic stress intensity factor of a functionally graded material under antiplane shear loading," Acta Mechanica, vol 149, pp 1-10, 2001 [93] L Ma, L.-Z Wu, L.-C Guo, and Z.-G Zhou, "Dynamic behavior of a finite crack in the functionally graded materials," Mechanics of Materials, vol 37, pp 11531165, 2005 [94] L Ma, J Li, R Abdelmoula, and L.-Z Wu, "Dynamic stress intensity factor for cracked functionally graded orthotropic medium under time-harmonic loading," European Journal of Mechanics - A/Solids, vol 26, pp 325-336, 2007 [95] M M Monfared and M Ayatollahi, "Dynamic stress intensity factors of multiple cracks in an orthotropic strip with FGM coating," Engineering Fracture Mechanics, vol 109, pp 45-57, 2013 [96] X.-M Bai, L.-C Guo, Z.-H Wang, and S.-Y Zhong, "A dynamic piecewiseexponential model for transient crack problems of functionally graded materials with arbitrary mechanical properties," Theoretical and Applied Fracture Mechanics, vol 66, pp 41-51, 2013 [97] M Ayatollahi and R Bagheri, "Dynamic behavior of several cracks in functionally graded strip subjected to anti-plane time-harmonic concentrated loads," Acta Mechanica Solida Sinica, vol 26, pp 691-705, 2013 [98] S.-H Ding and X Li, "The fracture analysis of an arbitrarily oriented crack in the functionally graded material under in-plane impact loading," Theoretical and Applied Fracture Mechanics, vol 66, pp 26-32, 2013 [99] X W Gao, C Zhang, J Sladek, and V Sladek, "Fracture analysis of functionally graded materials by a BEM," Composites Science and Technology, vol 68, pp 1209-1215, 2008 169 [100] C Zhang, A Savaidis, G Savaidis, and H Zhu, "Transient dynamic analysis of a cracked functionally graded material by a BIEM," Computational Materials Science, vol 26, pp 167-174, 2003 [101] J Dominguez and R Gallego, "Time domain boundary element method for dynamic stress intensity factor computations," International Journal for Numerical Methods in Engineering, vol 33, pp 635-647, 1992 [102] P Gu, M Dao, and R J Asaro, "A Simplified Method for Calculating the CrackTip Field of Functionally Graded Materials Using the Domain Integral," Journal of Applied Mechanics, vol 66, pp 101-108, 1999 [103] G Anlas, M H Santare, and J Lambros, "Numerical Calculation of Stress Intensity Factors in Functionally Graded Materials," International Journal of Fracture, vol 104, pp 131-143, 2000 [104] J.-H Kim and G H Paulino, "Finite element evaluation of mixed mode stress intensity factors in functionally graded materials," International Journal for Numerical Methods in Engineering, vol 53, pp 1903-1935, 2002 [105] W Chang-chun, H Peixiang, and L Ziran, "Extension of J integral to dynamic fracture of functional graded material and numerical analysis," Computers & Structures, vol 80, pp 411-416, 2002 [106] S H Song and G H Paulino, "Dynamic stress intensity factors for homogeneous and smoothly heterogeneous materials using the interaction integral method," International Journal of Solids and Structures, vol 43, pp 4830-4866, 2006 [107] J E Dolbow and M Gosz, "On the computation of mixed-mode stress intensity factors in functionally graded materials," International Journal of Solids and Structures, vol 39, pp 2557-2574, 2002 [108] J F Yau, S S Wang, and H T Corten, "A Mixed-Mode Crack Analysis of Isotropic Solids Using Conservation Laws of Elasticity," Journal of Applied Mechanics, vol 47, pp 335-341, 1980 [109] I V Singh, B K Mishra, and S Bhattacharya, "XFEM simulation of cracks, holes and inclusions in functionally graded materials," International Journal of Mechanics and Materials in Design, vol 7, p 199, 2011 [110] P Liu, T Yu, T Q Bui, and C Zhang, "Transient dynamic crack analysis in nonhomogeneous functionally graded piezoelectric materials by the X-FEM," Computational Materials Science, vol 69, pp 542-558, 2013 [111] B N Rao and S Rahman, "Mesh-free analysis of cracks in isotropic functionally graded materials," Engineering Fracture Mechanics, vol 70, pp 1-27, 2003 [112] J.-H Kim and G H Paulino, "T-stress, mixed-mode stress intensity factors, and crack initiation angles in functionally graded materials: a unified approach using 170 the interaction integral method," Computer Methods in Applied Mechanics and Engineering, vol 192, pp 1463-1494, 2003 [113] J.-H Kim and G H Paulino, "Consistent Formulations of the Interaction Integral Method for Fracture of Functionally Graded Materials," Journal of Applied Mechanics, vol 72, pp 351-364, 2004 [114] J Chen, L Z Wu, and S Y Du, "Element-Free Galerkin Methods for Fracture of Functionally-Graded Materials," Key Engineering Materials, vol 183-187, pp 487-492, 2000 [115] F Erdogan and B H Wu, "The Surface Crack Problem for a Plate With Functionally Graded Properties," Journal of Applied Mechanics, vol 64, pp 449456, 1997 [116] Y K Dai, R G Liu, M K Lim, and T Y Gu, "Comparison between the radial point interpolation and the Kriging interpolation used in meshfree methods," Computational Mechanics, vol 32, pp 60-70, 2003 [117] P Tongsuk and W Kanok-Nukulchai, "Further investigation of element-free Galerkin method using moving Kriging interpolation," International Journal of Computational Methods, vol 01, pp 345-365, 2004 [118] T Q Bui, M N Nguyen, and C Zhang, "Buckling analysis of Reissner–Mindlin plates subjected to in-plane edge loads using a shear-locking-free and meshfree method," Engineering Analysis with Boundary Elements, vol 35, pp 1038-1053, 2011 [119] T Q Bui, M Ngoc Nguyen, and C Zhang, "A moving Kriging interpolationbased element-free Galerkin method for structural dynamic analysis," Computer Methods in Applied Mechanics and Engineering, vol 200, pp 1354-1366, 2011 [120] T Q Bui, T N Nguyen, and H Nguyen-Dang, "A moving Kriging interpolationbased meshless method for numerical simulation of Kirchhoff plate problems," International Journal for Numerical Methods in Engineering, vol 77, pp 13711395, 2009 [121] T.-V Vu, N.-H Nguyen, A Khosravifard, M R Hematiyan, S Tanaka, and T Q Bui, "A simple FSDT-based meshfree method for analysis of functionally graded plates," Engineering Analysis with Boundary Elements, vol 79, pp 1-12, 2017 [122] C Zhang, J Sladek, and V Sladek, "Effects of material gradients on transient dynamic mode-III stress intensity factors in a FGM," International Journal of Solids and Structures, vol 40, pp 5251-5270, 2003 [123] J Sladek, V Sladek, C Zhang, P Solek, and E Pan, "Evaluation of fracture parameters in continuously nonhomogeneous piezoelectric solids," International Journal of Fracture, vol 145, pp 313-326, 2007 171 [124] C H Thai, V N V Do, and H Nguyen-Xuan, "An improved Moving Krigingbased meshfree method for static, dynamic and buckling analyses of functionally graded isotropic and sandwich plates," Engineering Analysis with Boundary Elements, vol 64, pp 122-136, 2016 [125] M Jirásek, "Non-local damage mechanics with application to concrete," Revue Franỗaise de Gộnie Civil, vol 8, pp 683-707, 2004 [126] V Murti and S Valliappan, "The use of quarter point element in dynamic crack analysis," Engineering Fracture Mechanics, vol 23, pp 585-614, 1986 [127] I Chiong, E T Ooi, C Song, and F Tin-Loi, "Computation of dynamic stress intensity factors in cracked functionally graded materials using scaled boundary polygons," Engineering Fracture Mechanics, vol 131, pp 210-231, 2014 [128] D Racz and T Q Bui, "Novel adaptive meshfree integration techniques in meshless methods," International Journal for Numerical Methods in Engineering, vol 90, pp 1414-1434, 2012 [129] A Khosravifard, M R Hematiyan, T Q Bui, and T V Do, "Accurate and efficient analysis of stationary and propagating crack problems by meshless methods," Theoretical and Applied Fracture Mechanics [130] T Q Bui and C Zhang, "Extended finite element simulation of stationary dynamic cracks in piezoelectric solids under impact loading," Computational Materials Science, vol 62, pp 243-257, 2012 [131] P Liu, T Yu, T Q Bui, C Zhang, Y Xu, and C W Lim, "Transient thermal shock fracture analysis of functionally graded piezoelectric materials by the extended finite element method," International Journal of Solids and Structures, vol 51, pp 2167-2182, 2014 [132] T Yu, T Q Bui, P Liu, C Zhang, and S Hirose, "Interfacial dynamic impermeable cracks analysis in dissimilar piezoelectric materials under coupled electromechanical loading with the extended finite element method," International Journal of Solids and Structures, vol 67–68, pp 205-218, 2015 [133] S Pyo and S El-Tawil, "Crack velocity-dependent dynamic tensile behavior of concrete," International Journal of Impact Engineering, vol 55, pp 63-70, 2013 [134] X Zhang and T Q Bui, "A fictitious crack XFEM with two new solution algorithms for cohesive crack growth modeling in concrete structures," Engineering Computations, vol 32, pp 473-497, 2015 [135] M M Dehghan Banadaki and B Mohanty, "Numerical simulation of stress wave induced fractures in rock," International Journal of Impact Engineering, vol 40– 41, pp 16-25, 2012 172 ... CHI MINH CITY HO CHI MINH CITY UNIVERSITY OF TECHNOLOGY NGUYỄN THANH NHÃ EXTENDED GALERKIN MESHFREE METHODS FOR FRACTURE MODELING IN ADVANCED FUNCTIONAL COMPOSITE MATERIALS Major Subject: Engineering... extended Galerkin meshless methods including radial point interpolation method (RPIM) and improved moving Kriging (MK) interpolation method Enrichment techniques including the use of step function for. .. are extracted in Chapter 17 CHAPTER EXTENDED MESHFREE GALERKIN METHODS FOR FRACTURE MECHANICS This chapter discusses about the interested meshfree methods based on the radial point interpolation