KRONE Fiber Optics Phone: 802.442.5411 Web: www.kroneamericas.com Indoor/Outdoor Cables Tight-Buffered, Low-Smoke, Zero-Halogen Jacketed (UL) Listed OFNR/OFCR Product Features ■ Available in single-mode as well as 50 and 62.5 µm multimode versions ■ Excellent crush, cut and abrasion resistance ■ Available with 4–24 fibers ■ Excellent flame retardancy (UL Listed OFNR/OFCR) ■ UV stable jacket ■ Flexible design/easy to install ■ Color-coded buffered fibers ■ All cables tested to EIA/TIA FOTP standards Benefits ■ Saves time, labor; ideal for direct connectorization. ■ Pull and terminate; no need to splice at building entrance. ■ Ideal for installation in conduits between buildings (non-armored) ■ Offers a convenient alternative to PVC riser cables ■ Armored version available for rodent resistance Mechanical & Environmental Characteristics 4–12 Fibers 18–24 Fibers Crush Resistance (EIA-FOTP-41A): 1500 N/cm 1500 N/cm Impact Resistance (EIA-FOTP-25A): 1000 impacts 1000 impacts Flexing (EIA-FOTP-104A): 1000 cycles 1000 cycles Maximum Pulling Load (EIA-FOTP-33A): 1000 Newtons 1800 Newtons (224 lbs.) (403 lbs.) Maximum Safe Operating Load: 600 Newtons 1000 Newtons (134 lbs.) (224 lbs.) Minimum Bend Radius: At Max. Load: 20 x cable O.D. 20 x cable O.D. Unloaded: 10 x cable O.D. 10 x cable O.D. Maximum Vertical Rise: 325 meters 325 meters Fiber Proof Test: 100 KPSI 100 KPSI Operating Temperature: -40°C to +70°C -40°C to +70°C Storage Temperature (non-flexing): -40°C to +70°C -40°C to +70°C Installation Temperature: 0°C to +70°C 0°C to +70°C TECHNICALDATA 50/125 Multimode 3.5/1.5 ▲ 2.6/0.6 ▲ 400/400 ▲ 50 ± 3 125 ± 2 0.200 ± 0.015 62.5/125 FDDI Multimode 3.5/1.5 ▲ 2.7/0.75 ▲ 160/500 ▲ 62.5 ± 3 125 ± 2 0.275 ± 0.015 62.5/125 Gigabit Multimode 3.5/1.5 ▲ 2.7/0.75 ▲ 200/500 ▲ 62.5 ± 3 125 ± 2 0.275 ± 0.015 100/140 Multimode 6.0/3.0 ▲ 4.5/2.0 ▲ 100/100 ▲ 100 + 3 140 + 4 0.290 ± 0.020 Single-mode 1.0/1.0 ■ 0.35/0.35 ■ Mode Field 9.3 ± 0.5 125 ± 2.0 0.13 (SMF-28) Diameter @1300nm Optical Specifications Max. Typical Guaranteed Core Clad Attenuation Attenuation Minimum Diameter Diameter Numerical Fiber Type (dB/km) (dB/km) Bandwidth (Microns) (Microns) Aperture ▲ Attenuation and Bandwidth values for Multimode: 850nm/1300nm ■ Attenuation and Bandwidth values for Single-mode: 1310nm/1550nm FiberOptic CABLING SYSTEMS KRONE Fiber Optics Phone: 802.442.5411 Web: www.kroneamericas.com Cable and Jacket Specifications and Ordering Information CABLE CABLE CABLE NO. OF UL DIAMETER WEIGHT JACKET PART Number TYPE FIBERS TYPE (inches) (mm) (Nom. lbs./km) TYPE 704LSZHIOCBX Distribution 4 OFNR (Riser) 0.235 6.0 90 Low Smoke Zero Halogen 706LSZHIOCBX Distribution 6 OFNR (Riser) 0.240 6.1 90 Low Smoke Zero Halogen 708LSZHIOCBX Distribution 8 OFNR (Riser) 0.280 7.1 125 Low Smoke Zero Halogen 712LSZHIOCBX Distribution 12 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen 718LSZHIOCBX Distribution 18 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen 724LSZHIOCBX Distribution 24 OFNR (Riser) 0.370 9.4 215 Low Smoke Zero Halogen 704LSZHIOBKX Breakout 4 OFNR (Riser) 0.365 9.3 200 Low Smoke Zero Halogen 706LSZHIOBKX Breakout 6 OFNR (Riser) 0.450 11.4 310 Low Smoke Zero Halogen 708LSZHIOBKX Breakout 8 OFNR (Riser) 0.500 12.7 380 Low Smoke Zero Halogen 712LSZHIOBKX Breakout 12 OFNR (Riser) 0.665 16.9 680 Low Smoke Zero Halogen 718LSZHIOBKX Breakout 18 OFNR (Riser) 0.640 16.3 600 Low Smoke Zero Halogen 724LSZHIOBKX Breakout 24 OFNR (Riser) 0.720 18.3 730 Low Smoke Zero Halogen 704LSZHARBKX Armored Breakout 4 OFCR (Riser) 0.650 16.5 825 Low Smoke Zero Halogen 706LSZHARBKX Armored Breakout 6 OFCR (Riser) 0.675 17.2 935 Low Smoke Zero Halogen 708LSZHARBKX Armored Breakout 8 OFCR (Riser) 0.785 19.9 1170 Low Smoke Zero Halogen 712LSZHARBKX Armored Breakout 12 OFCR (Riser) 0.850 21.6 1440 Low Smoke Zero Halogen 718LSZHARBKX Armored Breakout 18 OFCR (Riser) 0.850 21.6 1355 Low Smoke Zero Halogen 724LSZHARBKX Armored Breakout 24 OFCR (Riser) 0.990 25.2 1800 Low Smoke Zero Halogen Indoor/Outdoor, Low Smoke Zero Halogen Cable Effective date: 4/2000 Rev. 000. (File: 302-IN-ZC-XXX-1.6mm) Not a controlled document; subject to change without notice. Check with a factory representative before placing order. KEVLAR is a registered trademark of the DuPont Co. 900 µm Tight Buffered Fiber KEVLAR ® Reinforcement Central Member Rip Cord Low Smoke, Zero Halogen Outer Jacket (UL) Listed OFNR Binder (Above 12 Fiber) Breakout Cable, 12-Fiber Water-Swellable Core Wrap Central Strength Member Rip Cord 2.4 mm Sub-unit KEVLAR ® Strength Member Outer Jacket (Low Smoke, Zero Halogen/OFNR) Armored Breakout Cable, 12-Fiber Water-Swellable Core Wrap Central Strength Member Plastic Coated Corrugated Steel Wrap Rip Cords Inner Jacket (Low Smoke, Zero Halogen/OFCR) Outer Jacket (Low Smoke, Zero Halogen/OFCR) 2.4 mm Sub-unit KEVLAR ® Strength Member TECHNICALDATA X = Fiber type, substitute this symbol in part number for desired fiber type as follows: 10 = Single-mode; 50 = 50/125 G.I. Fiber; 62 = 62.5/125 G.I. FDDI Grade Fiber; 62G = 62.5/125 G.I. Gigabit Grade Fiber; LEAF = Corning LEAF™ Fiber. Multimode riser and plenum cables are available in orange. Single-mode riser and plenum cables are available in yellow. † NR = Not Rated FiberOptic CABLING SYSTEMS . Attenuation and Bandwidth values for Single-mode: 1310nm/1550nm FiberOptic CABLING SYSTEMS KRONE Fiber Optics Phone: 802.442.5411 Web: www.kroneamericas.com Cable. riser and plenum cables are available in yellow. † NR = Not Rated FiberOptic CABLING SYSTEMS